
Scalenode cm4-baseboard
antmicro/scalenode-cm4-baseboard
Baseboard for Raspberry Pi 4 Compute Module optimized for clustering
Boards in 27 GitHub repositories, designed in KiCad, that use the KP-1608CGCK by Kingbright (-40℃~+85℃ 120° 2.5V 20mA 50mcd 570nm 574nm 75mW Discrete Diode Water Clear Yellow Green 0603 LED Indication - Discrete ROHS). See how each wires it, with its parts, size, README and files; the KP-1608CGCK’s symbol, footprint and pinout are on its own page.

antmicro/scalenode-cm4-baseboard
Baseboard for Raspberry Pi 4 Compute Module optimized for clustering

antmicro/thunderbolt-pcie-adapter
This project contains open hardware design files for an adapter board wrapping 4-lane (i.e. 4x) PCIe Gen 3.0 devices into a Thunderbolt 3 uplink. It is based on the Intel/JHL6340SLLSQ Thunderbolt controller.

antmicro/artix-dc-scm
Experimental Xilinx Artix-7 driven Data Center Security Communication Module

antmicro/lpddr4-test-board
Experimental development board interfacing Xilinx Kintex-7 FPGA with LPDDR4 SDRAM


antmicro/kintex-410t-devboard
This repository contains open hardware design files for a devkit created for AMD-Xilinx Kintex-7 K410T FPGA.

antmicro/rdimm-ddr5-tester
FPGA-based DRAM tester supporting RDIMM DDR5 memories

antmicro/cm4-baseboard
Experimental baseboard supporting System on Modules with Raspberry Pi CM4/CM5 pinout

antmicro/rdimm-ddr4-tester
Experimental platform built around Xilinx Kintex-7 FPGA for development and customization of RAM controllers supporting RDIMM DDR4 RAM modules used in data centers.

antmicro/m2-smart-iot-module
https://antmicro.com/blog/2021/08/open-hardware-smart-m2-radio-module-for-iot/

antmicro/lpddr4-testbed
Experimental breakout board for a signle 200-ball WFBGA LPDDR4 chip in SO-DIMM DDR4 form factor.

antmicro/fmc-sata-adapter
Adapter board exposing SATA M.2 SSD on FMC board-to-board connector

antmicro/lpddr5-testbed
Experimental adapter intefacing a single LPDDR5 IC with FPGA-driven memory testers

antmicro/raspberry-pi-cm4-csi-adapter
This repository contains open hardware design files for an adapter board allowing to connect video accessories developed by Antmicro to a Raspberry Pi CM4 IO Board over a 22-pin FFC connector.

voloviq/stm32mp1-custom-devboard
Custom development board for stm32mp1-visionsom from Somlabs

antmicro/ddr4-spd-breakout-board
This repository contains open hardware design files for an experimental breakout board which allows reading the Serial Presence Detect (SPD) data from a 288-pin, JEDEC-compliant DDR4 DIMM module.

antmicro/programmable-led-panel
LED matrix controlled with iCE40 FPGA or RP2040 MCU for benchmarking and integration of video systems

alex31/smartprobe
firmware and hardware for an autonomous five holes 3D pitot tube

antmicro/audio-latency-tester-board
This project contains open hardware design files for an audio latency processing board. The system allows driving an external speaker and collecting audio samples from a pair of PDM or I2S microphones.

antmicro/job-ict-bottom-board
Adapter board for In-Circuit Testing (ICT) of the Antmicro's Jetson Orin Baseboard

ElfDeMaison/InerCal
TODO : Le signal MISO a ete deplacé du GPIO9 au GPIO20 car cela empêche l'esp32 de démarrer correctement


