Skip to the content

Boards using the KT-0603W

49 boards

Boards in 39 GitHub repositories, designed in KiCad, that use the KT-0603W by Hubei KENTO Elec (-40℃~+85℃ 100mW 120° 2.6V~3.1V 360mcd 5mA Discrete Diode Top-mount White Yellow Lens 0603 LED Indication - Discrete ROHS). See how each wires it, with its parts, size, README and files; the KT-0603W’s symbol, footprint and pinout are on its own page.

  • 2 layers50 × 70 mmLcdtap rp2350, the printed circuit board in 3D

    Lcdtap rp2350

    shapoco/lcdtap

    A tool for mirroring or capturing I2C/SPI LCD displays

    100 parts85
  • 6 layers69 × 54 mmOpen control board, the printed circuit board in 3D

    Open control board

    variegated-coffee/all-purpose-espresso-controller

    Espresso electronics are usually proprietary affairs with little to no expandability. The purpose of this project is to give everyone an open source alternative with lots of features and flexibility.

    201 parts14CERN-OHL-P-2.0
  • 4 layers149.9 × 152.5 mmTMR2615F osu pad, the printed circuit board in 3D

    TMR2615F osu pad

    dubnubdubnub/Giris

    open source 32 key/half (64 total) analog TMR split ortholinear keyboard w/ 8kHz USB HS

    168 parts4Apache-2.0
  • 2 layers89 × 44 mmCDRC, the printed circuit board in 3D

    CDRC

    lilindian16/customDRC

    Development of custom Audison DRC interface

    85 parts4
  • 2 layers106.3 × 21.7 mmNanoleaf shapes, the printed circuit board in 3D

    Nanoleaf shapes

    Cptmeme/Nanoleaf-Shapes-controller

    Bus-powered half-duplex interface board between a 3.3 V MCU and the Nanoleaf Shapes panel bus

    63 parts3GPL-3.0
  • 4 layers40 × 40 mmSTM Board V3, the printed circuit board in 3D

    STM Board V3

    Tay0710/Design_S1_006

    This project integrates hardware, firmware, and design elements to develop a fully functional autonomous 3D mapping drone system.

    46 parts3
  • 4 layers150 × 137.1 mmController, the printed circuit board in 3D

    Controller

    CircuitGuy943/Sabre-Integrated-flight-controller

    (🚧) A "Jack of all trades" custom flight controller board. With support for both power and control and the ability for custom firmware

    282 parts2GPL-3.0
  • 4 layers52.5 × 64 mmSTM32 Dev Board, the printed circuit board in 3D

    STM32 Dev Board

    hon13071184d/STM-Temp-Logger

    A hardware and firmware design for temperature data logger using STM32

    54 parts1MIT
  • 2 layers110.1 × 110.4 mmMini, the printed circuit board in 3D

    Mini

    makerspet/oomwoo-esp32s3-cm

    Pi CM4/CM5-compatible Compute Module using ESP32-S3 instead of CPU

    116 parts1Apache-2.0
  • 4 layers408.7 × 50 mmPartial Drawer Controller v1, the printed circuit board in 3D

    Partial Drawer Controller v1

    Robast-GmbH/PCB_Designs

    This repository contains all the necessary files and instructions for the PCBs that are designed using KiCad. Here is an overview of the main components: - .github: Contains Github-specific configurations, including…

    619 parts1MIT
  • 4 layers101.6 × 101.6 mmSTM32F405RGT6, the printed circuit board in 3D

    STM32F405RGT6

    abderrahman-laid/FE2201-MEPOS-STM32F405RGT6

    78 partsMIT
  • 4 layers26 × 108 mmESP32-Portatil, the printed circuit board in 3D

    ESP32-Portatil

    alanclerici/ESP32-Portatil-PCB

    57 parts
  • 4 layers32 × 74 mmFrankless, the printed circuit board in 3D

    Frankless

    arlaneenalra/pi-pico-boards

    A place to keep various pi-pico-board experiments

    124 parts
  • 4 layers40 × 40 mmMAVLink Lights, the printed circuit board in 3D

    MAVLink Lights

    DanielAdelodun/MAVLink-Lights-Hardware

    KiCAD files for MAVLink LED Strip Controller Hardware. Firmware can be found here: https://github.com/DanielAdelodun/MAVLinkLights

    83 parts
  • 2 layers70 × 45 mmBackpack defender, the printed circuit board in 3D

    Backpack defender

    donaldbell/productspeedrun

    Let's see how quickly we can get a product idea off the ground.

    55 parts
  • 4 layers74 × 66.8 mmEsp32s3-poc devboard, the printed circuit board in 3D

    Esp32s3-poc devboard

    Galacs/esp32s3-poc-devboard

    ESP32-S3 based PoC board made to test step-down power supply design, 24v level shifter, crystal circuits and RF circuit

    107 parts
  • 2 layers335.7 × 101 mmSplitkeybaord, the printed circuit board in 3D

    Splitkeybaord

    garvita4/split-keyboard

    This is a custom spli keybaord with the 1.8inch tft diaply and rotatory encoder and also with nfc based lock system with the controlable backlight .

    251 parts
  • 2 layers290.1 × 131 mmKoca58, the printed circuit board in 3D

    Koca58

    Hardware7253/Koca58

    A split keyboard design.

    156 parts
  • 4 layers22 × 60.5 mmStor, the printed circuit board in 3D

    Stor

    JBlitzar/stor

    A USB2.0 High Speed flash drive with a hotswappable MicroSD backend.

    65 partsGPL-3.0
  • 6 layers56 × 85 mmSunSproutHub, the printed circuit board in 3D

    SunSproutHub

    JohnNeville/SunSprout

    An esp32-c5 powered board that adds dual source battery charging, fuel management, and differential i2c bus. This was largely developed to be a complement with my other soil sensor project.

    142 partsCERN-OHL-S-2.0
  • 6 layers34.4 × 20 mmGigaControl, the printed circuit board in 3D

    GigaControl

    kaminaris/GigaESC-ControlBoard

    Compact six-layer control card for modular GigaESC motor controllers. The MCU, CAN transceiver, IMU and signal conditioning live here; the MOSFET power stage and power supply are separate boards.

    54 parts
  • 4 layers50 × 20 mmGigaPower200V, the printed circuit board in 3D

    GigaPower200V

    kaminaris/GigaESC-Power200V

    Compact 50 × 20 mm non-isolated power-supply module for the modular GigaESC platform, intended for the 200 V version. Provides 12 V, 5 V and 3.3 V rails through a separate output connector.

    70 parts
  • 2 layers49.5 × 49.7 mmAudioPowerBoard, the printed circuit board in 3D

    AudioPowerBoard

    LEAT-EDGE/ambient-pcb-audiopower

    Audio capture and energy management daughterboard PCB for the Ambient project.

    121 partsCERN-OHL-P-2.0