Skip to the content
PCBKitNew board

Boards using the FT232HL

22 boards

Boards in 13 GitHub repositories, designed in KiCad, that use the FT232HL by FTDI (Single Channel High Speed USB To Multipurpose UART/FIFO IC). See how each wires it, with its parts, size, README and files; the FT232HL’s symbol, footprint and pinout are on its own page.

  • 2 layers101.8 × 57.8 mmSc64v2, the printed circuit board in 3D

    Sc64v2

    Polprzewodnikowy/SummerCart64

    SummerCart64 - a fully open source N64 flashcart

    96 parts1.2kGPL-3.0
  • 4 layers63.6 × 67.5 mmPropellerPCB, the printed circuit board in 3D

    PropellerPCB

    tomkinsc/open-spectrometer

    Code, mechanical designs, and electronic plans related to the OpenSpectrometer project.

    76 parts30
  • 2 layers68.3 × 57.7 mmSdmux4, the printed circuit board in 3D

    Sdmux4

    hnz1102/sdcdmux-emmc

    SD CARD and eMMC Device Multiplexer with Infrared Remote Controller

    115 parts16MIT
  • 2 layers101.8 × 57.8 mmSc64v2.1, the printed circuit board in 3D

    Sc64v2.1

    Epicjoy/SC64

    This project's hardware and casing are modified based on the SummerCart64 project.

    97 parts15
  • 4 layers100 × 80 mmBuilt, the printed circuit board in 3D

    Built

    devbisme/ai-circuit-design-tests

    Tests of KiCad-related AI tools.

    243 parts10
  • 2 layers50 × 30 mmPower, the printed circuit board in 3D

    Power

    hnz1102/ft232hbrkout

    FT232HL BREAKOUT BOARD

    52 parts5
  • 2 layers105.6 × 105.9 mmFt2232 jtag tap, the printed circuit board in 3D

    Ft2232 jtag tap

    tnishinaga/seccamp2021_pcb

    250 parts3
  • 6 layers89 × 69 mmZynqBoard2, the printed circuit board in 3D

    ZynqBoard2

    tamapochi1/DigitalViolin

    291 parts2
  • 4 layers65 × 56 mmSdr, the printed circuit board in 3D

    Sdr

    jorikdima/sdr-pcb

    224 parts1
  • 4 layers108.2 × 64.3 mmLuxmètre, the printed circuit board in 3D

    Luxmètre

    Korotaa/luxmetter-design_HW-PCB_SW

    Le module est un End Device LoRa. C'est un dispositif IoT permettant de mesurer le niveau de luminosité grace au capteur TSL2571 et transmettre ces données à un serveur LoRaWAN (NetWork Serveur + Application Serveur) .

    110 parts1
  • 4 layers117.6 × 83 mmNile test chip pcb, the printed circuit board in 3D

    Nile test chip pcb

    Ash-tronix/nile_test_chip_pcb

    KiCad PCB design files to support the Ashtronix® Nile test chip.

    177 parts
  • 2 layers68.3 × 57.8 mmSdcdmuxemmc, the printed circuit board in 3D

    Sdcdmuxemmc

    hnz1102/sdcdmux-emmc

    SD CARD and eMMC Device Multiplexer with Infrared Remote Controller

    107 parts16MIT
  • 2 layers68.3 × 57.8 mmSdcdmuxemmc, the printed circuit board in 3D

    Sdcdmuxemmc

    hnz1102/sdcdmux-emmc

    SD CARD and eMMC Device Multiplexer with Infrared Remote Controller

    101 parts16MIT
  • 4 layers120 × 88 mmDual adc, the printed circuit board in 3D

    Dual adc

    devbisme/ai-circuit-design-tests

    Tests of KiCad-related AI tools.

    163 parts10
  • 4 layers140 × 95 mmDual adc, the printed circuit board in 3D

    Dual adc

    devbisme/ai-circuit-design-tests

    Tests of KiCad-related AI tools.

    186 parts10
  • 4 layers120 × 69 mmDual adc usb, the printed circuit board in 3D

    Dual adc usb

    devbisme/ai-circuit-design-tests

    Tests of KiCad-related AI tools.

    184 parts10
  • 4 layers128 × 85 mmPre ses, the printed circuit board in 3D

    Pre ses

    devbisme/ai-circuit-design-tests

    Tests of KiCad-related AI tools.

    182 parts10
  • 6 layers56.2 × 49 mmQuasarDebugger, the printed circuit board in 3D

    QuasarDebugger

    petrinm/QuasarSDR-Hardware

    Hardware design files are disrtributed under CERN Open Hardware Licence Version 2 - Weakly Reciprocal licence.

    128 parts7CERN-OHL-W-2.0
  • 6 layersZynqBoard, the printed circuit board in 3D

    ZynqBoard

    tamapochi1/DigitalViolin

    284 parts2
  • 4 layers84.3 × 108.4 mmUBITz Host z80-Host, the printed circuit board in 3D

    UBITz Host z80-Host

    dumaiss/uBITz

    **μBITz** – *ZAP 80s dreams into silicon.* Open modular 8-bit system: dock Z80/6502, tile SID/POKEY, boot in '83. M.2 LVDS serial, I²C map, Parity-10, ZAP IRQs. Spec + KiCad + Verilog + ref impl. Build. ZAP.

    50 parts
  • 4 layers31 × 35 mmUSB JTAG Programmer, the printed circuit board in 3D

    USB JTAG Programmer

    dumaiss/uBITz

    **μBITz** – *ZAP 80s dreams into silicon.* Open modular 8-bit system: dock Z80/6502, tile SID/POKEY, boot in '83. M.2 LVDS serial, I²C map, Parity-10, ZAP IRQs. Spec + KiCad + Verilog + ref impl. Build. ZAP.

    24 parts