2 layers68.6 × 53.3 mm
Avyduino
avycado13/avyduino
My take on the classic Arduino UNO. Powered by the same chips, but using a USB-C socket.
42 parts
4 layers65 × 56 mm
- Size
- 65 × 56 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 224
- Nets
- 343
- Pads
- 1,218
- Tracks, vias
- 3,447, 454
- Pours
- 13
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 7 Feb 2017
- Updated
- 25 Aug 2017
Overview
Sdr is an open-source printed circuit board by jorikdima, from the jorikdima/sdr-pcb repository on GitHub. It is a 4-layer board of 65 × 56 mm with 224 parts on 343 nets, routed with 3,447 tracks and 454 vias.
It is built around the FT232HL, LD39200PUR and B0322J5050AHF, with the ABLS2-12.000MHZ-D4Y-T, FL3000027 and KMR231NGLFS among its other parts. Its parts include 111 capacitors, 45 resistors, 14 ICs, 14 inductors and 8 crystals. It belongs with the radio and wireless boards and the FPGA and CPLD boards of this library.
Main components
6
FT232HL
LQFP48Single Channel High Speed USB To Multipurpose UART/FIFO ICFTDIUncategorised
LD39200PUR
DFN-6(3x3)-40℃~+125℃@(Tj) 1 24uVrms 250mV@(2A) 2A 300uA 500mV~5.75V 6V 70dB@(1kHz) Adjustable PG Pin、Over Current Protection、Reverse connection protection、Thermal Shutdown Positive DFN-6(3x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
B0322J5050AHF
SMD-55℃~+140℃ 0.71mm 1.1dB 1.29mm 1.3dB 15dB 16dB 180° 2.04mm 300MHz~2.2GHz、700MHz~2GHz 50Ω:50Ω SMD Balun ROHSTTM Technologies, Inc.Balun
ABLS2-12.000MHZ-D4Y-T
HC-49S-SMD-40℃~+85℃ 12MHz 18pF 50Ω ±30ppm ±30ppm HC-49S-SMD Crystals ROHSAbraconCrystals
FL3000027
SMD3225-4P-20℃~+70℃ 20pF 30MHz 40Ω ±10ppm ±10ppm SMD3225-4P Crystals ROHSDiodes IncorporatedCrystals
KMR231NGLFS
SMD-4P,4.2x2.8mm-40℃~+85℃ 2.8mm 32V 3N 4.6mm 50mA Gull Wing No Round Button SPST-NO Surface Mount,Vertical Without Bracket SMD-4P,4.2x2.8mm Tactile Switches ROHSC&KTactile Switches
README
README.mdPocketSDR
Parts
224| Qty | Value | Footprint | References |
|---|---|---|---|
| 48 | 100n | Capacitors_SMD:C_0603 | C3, C14, C15, C16, C17, C18, C20, C23, C24, C25, C27, C102, C103, C104, C106, C108 +32 |
| 11 | 470n | Capacitors_SMD:C_0603 | C2, C4, C10, C11, C12, C13, C19, C64, C65, C66, C67 |
| 10 | 20p | Capacitors_SMD:C_0603 | C21, C22, C86, C87, C90, C91, C92, C93, C110, C111 |
| 8 | 1u | Capacitors_SMD:C_0603 | C28, C29, C37, C80, C81, C82, C83, C85 |
| 7 | 10k | Resistors_SMD:R_0603 | R2, R26, R28, R30, R31, R32, R37 |
| 6 | 10u | Capacitors_SMD:C_0805 | C26, C72, C74, C75, C78, C79 |
| 6 | 1k | Resistors_SMD:R_0603 | R3, R17, R18, R19, R20, R27 |
| 6 | 3.6p | Capacitors_SMD:C_0603 | C89, C95, C96, C97, C98, C99 |
| 6 | 33p | Capacitors_SMD:C_0603 | C34, C54, C68, C69, C70, C71 |
| 5 | 4.7k | Resistors_SMD:R_0603 | R4, R5, R6, R7, R29 |
| 4 | 0 | Resistors_SMD:R_0603 | R42, R43, R44, R45 |
| 4 | 2.7n | Inductors_SMD:L_0603 | L8, L9, L11, L12 |
| 4 | 22 | Resistors_SMD:R_0603 | R9, R21, R33, R34 |
| 4 | 36n | Inductors_SMD:L_0603 | L2, L6, L7, L10 |
| 4 | 4.7u | Capacitors_SMD:C_0603 | C1, C101, C107, C109 |
| 4 | 820 | Resistors_SMD:R_0603 | R10, R12, R40, R41 |
| 4 | BLM18KG601SN1D | Inductors_SMD:L_0805 | L1, L3, L13, L14 |
| 3 | 100p | Capacitors_SMD:C_0603 | C76, C77, C94 |
| 3 | 10n | Capacitors_SMD:C_0603 | C42, C45, C105 |
| 3 | 390 | Resistors_SMD:R_0603 | R14, R38, R39 |
| 3 | MIC94310 | sdr-foots:DFN-4 | U8, U9, U10 |
| 2 | 1.2k | Resistors_SMD:R_0603 | R11, R13 |
| 2 | 120k 1% | Resistors_SMD:R_0603 | R22, R23 |
| 2 | 150p | Capacitors_SMD:C_0603 | C49, C56 |
| 2 | 470p | Capacitors_SMD:C_0603 | C41, C43 |
| 2 | 6.8p | Capacitors_SMD:C_0603 | C73, C100 |
| 2 | B0322J5050 | sdr-foots:B0322J5050 | T1, T2 |
| 2 | BGS12 | sdr-foots:TSLP-6-4 | U12, U13 |
| 2 | ESD0P8RFL | sdr-foots:TSLP-4-7 | D1, D2 |
| 2 | PAM2305 | TO_SOT_Packages_SMD:SOT-23-5 | U6, U11 |
| 2 | TR_TC1-1-43X+ | sdr-foots:TC1-1-43X+ | T3, T4 |
| 1 | 0 (NC) | Resistors_SMD:R_0603 | R8 |
| 1 | 1.6k 1% | Resistors_SMD:R_0603 | R1 |
| 1 | 100k 1% | Resistors_SMD:R_0603 | R24 |
| 1 | 12k | Resistors_SMD:R_0603 | R15 |
| 1 | 12k 1% | Resistors_SMD:R_0603 | R36 |
| 1 | 2.2u | Inductors_SMD:L_Taiyo-Yuden_MD-4040 | L4 |
| 1 | 2k | Resistors_SMD:R_0603 | R35 |
| 1 | 4.7u | Inductors_SMD:L_Taiyo-Yuden_MD-5050 | L5 |
| 1 | 5510209F | sdr-foots:LED_IND_SINGLE | D4 |
| 1 | 5512509F | sdr-foots:LED_IND_SINGLE | D3 |
| 1 | 560k 1% | Resistors_SMD:R_0603 | R25 |
| 1 | 6.8k | Resistors_SMD:R_0603 | R16 |
| 1 | 93LCxxBT-I/OT | TO_SOT_Packages_SMD:SOT-23-6 | U15 |
| 1 | ABLS2-12.000MHZ-D4Y-T | Crystals:Crystal_HC49-SD_SMD | Y3 |
| 1 | ABM11-141 | Crystals:Crystal_SMD_2016-4pin_2.0x1.6mm | Y2 |
| 1 | DONE | LEDs:LED_0603 | D5 |
| 1 | ECP5 | sdr-foots:ECP5_381 | U4 |
| 1 | ESD7016 | sdr-foots:ESD7016 | D7 |
| 1 | FL3000027 | Crystals:Crystal_SMD_3225-4pin_3.2x2.5mm | Y1 |
| 1 | FT232HL | Housings_QFP:LQFP-48_7x7mm_Pitch0.5mm | U14 |
| 1 | FT601 | sdr-foots:QFN_76 | U1 |
| 1 | GSB443133HR | sdr-foots:USB3_microB | X1 |
| 1 | JTAG | Pin_Headers:Pin_Header_Straight_1x05_Pitch1.27mm | X4 |
| 1 | JTAG | Pin_Headers:Pin_Header_Straight_1x08_Pitch1.27mm | X2 |
| 1 | KMR231NGLFS | sdr-foots:Switch_KMR2 | SW1 |
| 1 | LD39200 | Housings_DFN_QFN:DFN-6-1EP_3x3mm_Pitch0.95mm | U7 |
| 1 | LMS 3.3A | Pin_Headers:Pin_Header_Angled_1x02_Pitch2.54mm | JP1 |
| 1 | LMS 3.3D | Pin_Headers:Pin_Header_Angled_1x02_Pitch2.54mm | JP2 |
| 1 | LMS6002DR2 | sdr-foots:DQFN-120_via_off_pad | U3 |
| 1 | LOGO | sdr-foots:USBLOGO | G*** |
| 1 | RX | sdr-foots:SMA_H | J1 |
| 1 | RaspberryPiConnector | Socket_Strips:Socket_Strip_Straight_2x20_Pitch2.54mm | X3 |
| 1 | S1711 | sdr-foots:SHIELD | S1 |
| 1 | Si5351 | Housings_SSOP:MSOP-10_3x3mm_Pitch0.5mm | U5 |
| 1 | TEST | Measurement_Points:Test_Point_Keystone_5019_Minature | TP2 |
| 1 | TEST | Measurement_Points:Test_Point_Keystone_5015_Micro-Minature | TP1 |
| 1 | TX | sdr-foots:SMA_H | J2 |
| 1 | USB_OTG | Connectors:USB_Mini-B | X5 |
| 1 | ~INIT | LEDs:LED_0603 | D6 |
The 212 most common of 224 parts.
Questions
How big is the Sdr PCB?
It measures 65 × 56 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Sdr use?
224 parts, built around the FT232HL, LD39200PUR, B0322J5050AHF and ABLS2-12.000MHZ-D4Y-T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sdr KiCad files?
From the jorikdima/sdr-pcb repository on GitHub, at the commit this page was made from: the board is sdr.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sdr design in my own project?
Its repository states no licence, so its author keeps all rights: ask jorikdima before reusing the design.
Similar boards
- 2 layers94.8 × 94.8 mm
PCB UI
daisybiopcr/mira
The Mira PCR Thermocycler's electronical, mechanical, and firmware design.
66 partsMIT - 4 layers73.5 × 293.4 mm
- 4 layers101.6 × 76.2 mm
- 4 layers76.9 × 67.3 mm
- 4 layers50 × 16 mm
System board
proegssilb/lightsaber-hardware
PCBs and other files for lightsaber soundboard hardware.
72 parts2CERN-OHL-S-2.0 - 4 layers80.3 × 63 mm
- 4 layers70.7 × 55.5 mm
Oversoon
malikhubb/Oversoon
Custom PCB design for geolocation sensing, wifi communications, and LED display
64 parts