2 layers48.2 × 57 mm
Sunlu S1-Board
Pegoku/Sunlu-S1-Board
Drop-in replacement controller board for the Sunlu S1 filament dryer.
58 parts15
Boards using the B360
16 boardsBoards in 15 GitHub repositories, designed in KiCad, that use the B360 by Diodes Incorporated (-55℃~+150℃ 1 Independent 100A 3A 500uA@60V 60V 700mV@3A SMC(DO-214AB) Schottky Diodes ROHS). See how each wires it, with its parts, size, README and files; the B360’s symbol, footprint and pinout are on its own page.
- 4 layers
- 2 layers50 × 47.3 mm
- 2 layers160 × 99.9 mm
KiwiStim0.3
Neil427/KiwiSTIM
KiwiSTIM is a engine simulator used for testing engine management computers, it is variation of Ardustim and uses the Ardustim firmware.
144 parts3GPL-3.0 - 4 layers138.4 × 138.3 mm
GRBL board
ephemeridis/GRBL_board
This is a PCB designed to run GRBL, an open source CNC control software that is designed and optimised for Arduino.
287 parts2GPL-3.0 - 4 layers52.8 × 56.4 mm
ESP32 Motor Controller
Angelpele/Integrated_FOC_BLDC_Actuator
Design and development of a portable, self contained closed loop Field Oriented Controller (FOC) for Brushless DC (BLDC) motors built on the ESP32 S3 via a custom designed PCB.
154 partsMIT - 2 layers68 × 86 mm
Can datalogger board
bglen/vehicle_telemetry
Vehicle Live Telemetry System using Pi-based data logging
106 partsMIT - 4 layers56.4 × 69.7 mm
Bluetooth L 31
HodearS/Bluetooth_Luxman_L_31
Bluetooth module for the Luxman L-31. Based on a Feasycom FSC-BT1026E module with an external antenna. The design integrates a Sabre ES9023P DAC. It must be powered between 35V and 40V.
69 parts - 2 layers70 × 82 mm
Onyks iot control cabinet pcb
knonyks/onyks-iot-control-cabinet
Cabinet access sensors with controlled access.
65 parts - 2 layers104.8 × 54.8 mm
- 4 layers27 × 18 mm
Powermod
Slenderman00/powermod-lt8645s
powermod-tps54202 is a simple DC-DC regulator board developed by Lightside Instruments AS.
21 parts - 4 layers145 × 99.1 mm
Powersupply
SR-Madsen/CocktailMachine
Contains the code and PCB used for the actual implementation of the STM32F4-based cocktail machine.
136 parts - 2 layers65 × 56.5 mm
Volksz2
apxco/Kicad
Zum Testen von einigen Transistorschaltungen für Verstärker. Noch nicht fertig.
34 parts - 2 layers200 × 45 mm
Led and photodiode board
borzeman/PzbElectronics
Репозиторий для поддержки версионирования при разработке плат для киоска.
145 parts - 4 layers100 × 50 mm
USB Hub
Phil-CIA/Development-Station-Power-Supply
3 channel bench supply with current and voltage plotting
82 parts - 2 layers91.6 × 74.9 mm
ConverterTest
SR-Madsen/CocktailMachine
Contains the code and PCB used for the actual implementation of the STM32F4-based cocktail machine.
50 parts