

CarteLed
Routage de la carte PCB en aliminum qui acceuille les LEDs
- Size
- 104.8 × 54.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 127
- Nets
- 60
- Pads
- 358
- Tracks, vias
- 337, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 3 Jan 2023
- Updated
- 10 Oct 2023
Overview
CarteLed is an open-source printed circuit board by Lazorme, from the Lazorme/CarteLEDs repository on GitHub. It is a 2-layer board of 104.8 × 54.8 mm with 127 parts on 60 nets, routed with 337 tracks and 0 vias.
It is built around the MPQ24833-BGN-AEC1-P, LERTDUWS2WM-JBLA-1+LBMA-P+4V5A-P+MBNA-CQ and B360, with the B560 and NCP18XH103F03RB among its other parts. Its parts include 85 resistors, 14 capacitors, 11 diodes, 4 ICs and 4 inductors.
Main components
5MPQ24833-BGN-AEC1-P
SOIC-8-EPLED DriversMonolithic Power SystemsLERTDUWS2WM-JBLA-1+LBMA-P+4V5A-P+MBNA-CQ
-- Chip On Board (COB) Light Sources ROHSOSRAM Opto SemiconChip On Board (COB) Light SourcesB360
SMC(DO-214AB)-55℃~+150℃ 1 Independent 100A 3A 500uA@60V 60V 700mV@3A SMC(DO-214AB) Schottky Diodes ROHSDiodes IncorporatedSchottky DiodesB560
SMCSMC New Arrivals ROHSDiodes IncorporatedUncategorisedNCP18XH103F03RB
0603-40℃~+125℃ 0.8mm 1.6mm 100mW 10kΩ 1mW/℃ 310uA 3380K 3434K 3455K ±1% ±1% 0603 NTC Thermistors ROHSMurataNTC Thermistors
README
README.mdCarteLEDs
Routage de la carte PCB en aliminum qui acceuille les LEDs
PCB

Parts
127| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | R_1206_3216Metric | Resistor_SMD:R_1206_3216Metric | R0_1, R0_1, R0_1, R0_1, R0_1, R0_1, R0_1, R0_1, R0_1, R0_1, R0_1, R0_1, R0_1, R0_1, R0_1, R0_1 +16 |
| 22 | 0 | Resistor_SMD:R_1206_3216Metric | R14, R14, R14, R14, R14, R14, R14, R14, R14, R14, R14, R14, R14, R14, R14, R14 +6 |
| 8 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R7, R12, R15, R20, R23, R28, R31 |
| 7 | LERTDUWS2WM-JBLA-1+LBMA-P+4V5A-P+MBNA-CQ | AComposantPROJOLEDs:LEDs | LED1, LED2, LED3, LED4, LED5, LED6, LED7 |
| 6 | 250m | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R17, R18, R25, R26 |
| 6 | 4.7µF | Capacitor_SMD:CP_Elec_5x5.4 | C5, C10, C15, C20, C21, C22 |
| 5 | Conn_01x01 | Connector_Pin:Pin_D0.7mm_L6.5mm_W1.8mm_FlatFork | PMWBlue, PMWGreen, PMWRed, PMWWhite, Température |
| 4 | 0.1µF | Capacitor_SMD:C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C4, C9, C14, C19 |
| 4 | 10 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R13, R21, R29 |
| 4 | 11k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R16, R24, R32 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R11, R19, R27 |
| 4 | 22µH | Inductor_SMD:L_12x12mm_H8mm | L1, L2, L3, L4 |
| 4 | MPQ24833-BGN-AEC1-P | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U1, U2, U3, U4 |
| 4 | NC | Capacitor_SMD:C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C3, C8, C13, C18 |
| 3 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R22, R30 |
| 3 | B360 | Diode_SMD:D_SMC | D1, D3, D4 |
| 2 | 400m | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9, R10 |
| 1 | B560 | Diode_SMD:D_SMC | D2 |
| 1 | Conn_01x02 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | DC_24V1 |
| 1 | NCP18XH103F03RB | AComposantPROJOLEDs:THRMC1608X95N | RT1 |
The 125 most common of 127 parts.
Similar boards
- 2 layers76 × 76 mm

- 2 layers48.2 × 57 mm

Sunlu S1-Board
Pegoku/Sunlu-S1-Board
Drop-in replacement controller board for the Sunlu S1 filament dryer.
58 parts15 - 4 layers

- 2 layers50 × 47.3 mm

- 2 layers160 × 99.9 mm

KiwiStim0.3
Neil427/KiwiSTIM
KiwiSTIM is a engine simulator used for testing engine management computers, it is variation of Ardustim and uses the Ardustim firmware.
144 parts3GPL-3.0 - 4 layers138.4 × 138.3 mm

GRBL board
ephemeridis/GRBL_board
This is a PCB designed to run GRBL, an open source CNC control software that is designed and optimised for Arduino.
287 parts2GPL-3.0 - 4 layers52.8 × 56.4 mm

ESP32 Motor Controller
Angelpele/Integrated_FOC_BLDC_Actuator
Design and development of a portable, self contained closed loop Field Oriented Controller (FOC) for Brushless DC (BLDC) motors built on the ESP32 S3 via a custom designed PCB.
154 partsMIT - 2 layers68 × 86 mm

Can datalogger board
bglen/vehicle_telemetry
Vehicle Live Telemetry System using Pi-based data logging
106 partsMIT
Questions
How big is the CarteLed PCB?
It measures 104.8 × 54.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CarteLed use?
127 parts, built around the MPQ24833-BGN-AEC1-P, LERTDUWS2WM-JBLA-1+LBMA-P+4V5A-P+MBNA-CQ, B360 and B560. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CarteLed KiCad files?
From the Lazorme/CarteLEDs repository on GitHub, at the commit this page was made from: the board is CarteAluLED/CarteLed/CarteLed.kicad_pcb and its schematic CarteAluLED/CarteLed/CarteLED.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CarteLed design in my own project?
Its repository states no licence, so its author keeps all rights: ask Lazorme before reusing the design.