Skip to the content

Boards using the CDDFN10-3324P

5 boards

Boards in 5 GitHub repositories, designed in KiCad, that use the CDDFN10-3324P by Bourns (-55℃~+85℃ 0.04pF 100nA 3.3V 30W 4.5V 4A@8/20us 7.5V Four channels IEC 61000-4-2 TVS DFN-10(1x2.5) ESD and Surge Protection (TVS/ESD) ROHS). See how each wires it, with its parts, size, README and files; the CDDFN10-3324P’s symbol, footprint and pinout are on its own page.

  • 6 layers120 × 40 mmCM5CarrierV2, the printed circuit board in 3D

    CM5CarrierV2

    AsadImranRafique/CM5-Carrier-Board-Rev2

    Open-source six-layer Raspberry Pi CM4/CM5 carrier board with USB-C, 25 W PoE, M.2 NVMe, microSD, I2S, and expansion-board connectors.

    62 parts1Apache-2.0
  • 6 layers120 × 40 mmCM5Carrier, the printed circuit board in 3D

    CM5Carrier

    AsadImranRafique/CM5-Carrier-Board

    Custom Raspberry Pi CM4/CM5 carrier board with PoE, Gigabit Ethernet, M.2 NVMe, microSD and peripheral interfaces.

    54 partsApache-2.0
  • 4 layers45 × 20 mm2s 40A PSU and charger, the printed circuit board in 3D

    2s 40A PSU and charger

    techy-robot/CACKLE-PSU-2s_40A_PSU_and_charger

    This is a rather complex power supply unit. It supports USB-C Power Delivery at 9volt 2 amps, and can charge a 2 cell lipo battery. It can pump out 40 amps if the battery supports the current.

    115 parts
  • 2 layers30 × 20 mmUSB only 2A PSU one side, the printed circuit board in 3D

    USB only 2A PSU one side

    techy-robot/CACKLE-PSU-USB_2A_PSU_1side

    The main ICs are an mcu, and a 5v 2a switching regulator. The system can theoretically handle 20 volt spikes, but this is mostly meant for 5v output on one side only.

    48 parts
  • 4 layers45 × 20 mm2s 40A PSU and charger, the printed circuit board in 3D

    2s 40A PSU and charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    112 parts915