
Boards using the RA-02
18 boardsBoards in 14 GitHub repositories, designed in KiCad, that use the RA-02 by Ai-Thinker. See how each wires it, with its parts, size, README and files; the RA-02’s symbol, footprint and pinout are on its own page.
- 2 layers46.8 × 37 mm

- 2 layers29 × 38 mm

Esp32c3-radio adapter
mithro/esp32-to-433mhz
ESP32-C3 SuperMini form-factor KiCad board with castellated headers
14 parts1Apache-2.0 - 2 layers376.1 × 352.9 mm

Module radio
victorstoica114/ESP32-C3_Radio
PlatformIO project for testing multiple radio modules with an ESP32-C3 board, an optional SSD1306 OLED display, and serial/AT-command based firmware variants.
175 parts1MIT - 4 layers62 × 50 mm

Battery monitor rev a
bogdan-kovalchuk/esp32-battery-charging-monitoring
An ESP32-based 12 V battery voltage monitor. The firmware measures battery voltage, while a Flask backend delivers notifications to a Signal group through signal-cli.
66 partsMIT - 4 layers65 × 45 mm

Lora gps tracker rev a
bogdan-kovalchuk/esp32-lora-gps-tracker
Encrypted point-to-point GPS telemetry over 433 MHz LoRa between two ESP32 boards.
69 partsMIT - 2 layers26 × 36 mm

Generator alarm
Glebka/ARS
My first project based on the STM32 microcontroller family. It consists of an alarm module and a receiver. The alarm module utilizes the RCWL-0516 motion sensor, the STM32F030K6T6 microcontroller, which wakes up upon…
25 parts - 2 layers100 × 100 mm

ESP32 S3 DEVKIT EL V1
iSebass/TourisTech
En el contexto de un mundo cada vez más consciente de la importancia de la sostenibilidad y la conservación del medio ambiente, surge un proyecto visionario que busca revolucionar la industria del ecoturismo en…
91 parts - 2 layers93.4 × 87.4 mm

- 2 layers85 × 70 mm

Pcbignicao smd
Serra-Rocketry/ignitor
[Propulsion] Remote ignition system for rocket motors.
36 partsGPL-3.0 - 2 layers49.1 × 56.4 mm

Atmega328p gate controller
Strat00s/atmega328p-lora-relay
Simple atmega based LoRa relay.
32 partsGPL-3.0 - 2 layers150 × 62.5 mm

- 2 layers24 × 36 mm

LoRaModem
wangyeee/OpenHardware
Collections of hardware design related to my drone project.
48 parts10BSD-3-Clause - 2 layers150 × 50 mm

- 2 layers110 × 90 mm

- 2 layers17.5 × 22.5 mm

Sx1278-ra02-breakout
mithro/esp32-to-433mhz
ESP32-C3 SuperMini form-factor KiCad board with castellated headers
2 parts1Apache-2.0 - 2 layers74 × 88.5 mm

- 2 layers60 × 58 mm

Pcbcomando
Serra-Rocketry/ignitor
[Propulsion] Remote ignition system for rocket motors.
14 partsGPL-3.0 - 2 layers66 × 64 mm

Pcbignicao
Serra-Rocketry/ignitor
[Propulsion] Remote ignition system for rocket motors.
33 partsGPL-3.0