
RpiFly v3
r3dpath/RpiFly_Hardware
While most of the functionality here has been tested to work theres certainally some marginal design decisions, just beware.

Astro club BITS Pilani's flight computer code
VADA is an open-source printed circuit board by YogPanjarale, from the YogPanjarale/astro-avionics repository on GitHub. It is a 2-layer board of 150 × 62.5 mm with 72 parts on 101 nets, routed with 522 tracks and 108 vias.
It is built around the RA-02, CPC1020N and ICM-20649. Its parts include 27 resistors, 13 ICs, 11 diodes, 7 connectors and 4 capacitors.
Flight computer system for rocket missions.
pico/ - New flight computer implementation (Raspberry Pi Pico)
dosa-2025/ - Previous flight computer code (archived)
Navigate to the pico/ directory to start development:
cd picoOpen the project in PlatformIO to build and upload the firmware.
See LICENSE for license information.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 33kR | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +1 |
| 8 | D_Zener | Diode_SMD:D_SOD-123F | D4, D5, D6, D7, D8, D9, D14, D15 |
| 7 | 10kR | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5, R6, R24, R25, R26, R27 |
| 4 | CPC1020N | Package_SO:SOP-4_3.8x4.1mm_P2.54mm | U10, U11, U12, U13 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 4 | i2c_AB | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 3 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C3, C4 |
| 3 | LED | LED_THT:LED_D3.0mm | D1, D2, D3 |
| 3 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
| 1 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 1 | 5 V IN | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J1 |
| 1 | BMP585_A | Modules:BMP-390L | U5 |
| 1 | BMP585_B | Modules:BMP-390L | U4 |
| 1 | Batt Conn | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J7 |
| 1 | ConnCheck | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J4 |
| 1 | GPS | Modules:M8N GPS | U6 |
| 1 | ICM-20649 | Modules:ICM-20649 | U2 |
| 1 | LIS3DML | Modules:Pololu LIS3DML | U3 |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U9 |
| 1 | PicoA | Module:RaspberryPi_Pico_Common_THT | A1 |
| 1 | PicoB | Module:RaspberryPi_Pico_Common_THT | A2 |
| 1 | Pyro 1 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J5 |
| 1 | Pyro 2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J6 |
| 1 | Pyro 3 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J2 |
| 1 | Pyro 4 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J3 |
| 1 | RA-02 | easyeda2kicad:WIRELM-SMD_RA-02-BL | U1 |
| 1 | SD_A | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | U8 |
| 1 | SD_B | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | U7 |

r3dpath/RpiFly_Hardware
While most of the functionality here has been tested to work theres certainally some marginal design decisions, just beware.


SR-Madsen/CocktailMachine
Contains the code and PCB used for the actual implementation of the STM32F4-based cocktail machine.



mithro/esp32-to-433mhz
ESP32-C3 SuperMini form-factor KiCad board with castellated headers

victorstoica114/ESP32-C3_Radio
PlatformIO project for testing multiple radio modules with an ESP32-C3 board, an optional SSD1306 OLED display, and serial/AT-command based firmware variants.

bogdan-kovalchuk/esp32-battery-charging-monitoring
An ESP32-based 12 V battery voltage monitor. The firmware measures battery voltage, while a Flask backend delivers notifications to a Signal group through signal-cli.
It measures 150 × 62.5 mm and has 2 copper layers, 1.6 mm thick.
72 parts, built around the RA-02, CPC1020N and ICM-20649. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the YogPanjarale/astro-avionics repository on GitHub, at the commit this page was made from: the board is vada/VADA.kicad_pcb and its schematic vada/VADA.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask YogPanjarale before reusing the design.