2 layers91.6 × 74.9 mm
ConverterTest
SR-Madsen/CocktailMachine
Contains the code and PCB used for the actual implementation of the STM32F4-based cocktail machine.
50 parts
4 layers145 × 99.1 mm
Powersupply
SR-Madsen/CocktailMachineContains the code and PCB used for the actual implementation of the STM32F4-based cocktail machine.
- Size
- 145 × 99.1 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 136
- Nets
- 234
- Pads
- 628
- Tracks, vias
- 9,248, 728
- Pours
- 27
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 16 Sep 2020
- Updated
- 2 May 2022
Overview
Powersupply is an open-source printed circuit board by SR-Madsen, from the SR-Madsen/CocktailMachine repository on GitHub. It is a 4-layer board of 145 × 99.1 mm with 136 parts on 234 nets, routed with 9,248 tracks and 728 vias.
It is built around the ST1S41PHR, W25Q32JVSSIQ and 150060SS55040, with the CPC1020N, 150060VS55040 and 150060YS55040 among its other parts. Its parts include 60 capacitors, 30 resistors, 15 diodes, 9 connectors and 6 ICs. It belongs with the power boards and the STM32 boards of this library.
Main components
12
ST1S41PHR
SOIC-8-40℃~+150℃@(TJ) 1 1.5mA 4A 4V~18V 800mV~18V 850kHz Adjustable Buck Buck Built-in Yes SOIC-8 DC-DC Converters ROHSSTMicroelectronicsDC-DC Converters
W25Q32JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 133MHz 1uA 2.7V~3.6V 20 Years 32Mbit 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
150060SS55040
0603-40℃~+85℃ 140° 20mA 2V 48mW 630nm 645nm 70mcd Discrete Diode Red 0603 LED Indication - Discrete ROHSWürth ElektronikLED Indication - Discrete
CPC1020N
SOP-4-2.54mm-40℃~+85℃ 0.13mA 1.2A 1.2V 1.5kV 116mΩ 30V 400mW 480us 650us One normally open: 2A (SPST-NO) SOP-4-2.54mm Solid State Relays (MOS Output) ROHSLittelfuse/IXYSSolid State Relays (MOS Output)150060VS55040
0603-40℃~+85℃ 140° 20mA 2V~2.4V 48mW 573nm 575nm 60mcd Discrete Diode Yellow Green 0603 LED Indication - Discrete ROHSWürth ElektronikLight Emitting Diodes (LED)150060YS55040
0603-40℃~+85℃ 100mcd 140° 20mA 2V 48mW 589nm 591nm Discrete Diode Yellow 0603 LED Indication - Discrete ROHSWürth ElektronikLED Indication - Discrete
B360
SMC(DO-214AB)-55℃~+150℃ 1 Independent 100A 3A 500uA@60V 60V 700mV@3A SMC(DO-214AB) Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
BAT54J
SOD-323F1 Independent 200mA 2uA@25V 30V 600mA 800mV@100mA SOD-323F Schottky Diodes ROHSNexperiaSchottky Diodes
M50-3610742
-Pin HeadersHarwinQSH-030-01-F-D-A-K-TR
SMD,P=0.5mm0.5mm 2 60P Gold Surface Mount,Vertical SMD,P=0.5mm Board-to-Board and Backplane Connector ROHSSamtecBoard-To-Board And Backplane Connector
SRN6045TA-101M
SMD,6x6mm1.33A 100uH 456mΩ 920mA ±20% SMD,6x6mm Power Inductors ROHSBournsPower InductorsSRR1208-821KL
SMD,12.7x12.7mm1.15Ω 550mA 770mA 820uH ±10% SMD,12.7x12.7mm Power Inductors ROHSBournsPower Inductors
README
README.mdCocktail Machine
Contains the code and PCB used for the actual implementation of the STM32F4-based cocktail machine.
The DiscoveryDemo folder contains a TouchGFX demo used on the STM32F769 Discovery Board from ST.
Documentation, including a system report written in LaTeX, can be found in the Documentation folder.
Overview
A block diagram overview of the system is shown below.
Hardware
The PCB has been designed with inspiration from ST's discovery board.
Software
A preliminary GUI template is shown below. This has been implemented in TouchGFX.
Parts
136| Qty | Value | Footprint | References |
|---|---|---|---|
| 31 | 100 nF | Capacitor_SMD:C_0603_1608Metric | C18, C20, C25, C27, C28, C29, C30, C31, C32, C34, C35, C36, C37, C38, C39, C42 +15 |
| 6 | 330 nF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C6, C8, C9, C12 |
| 5 | 10 kOhm | Resistor_SMD:R_0603_1608Metric | R11, R12, R13, R14, R17 |
| 5 | 150060SS55040 | Personal_Passives:150060SS55040 | LED1, LED4, LED5, LED6, LED7 |
| 4 | 10 µF | Capacitor_SMD:C_1206_3216Metric | C1, C19, C22, C57 |
| 4 | 2k | Resistor_SMD:R_0603_1608Metric | R26, R27, R28, R29 |
| 4 | 900 R | Resistor_SMD:R_0603_1608Metric | R18, R19, R20, R21 |
| 4 | CPC1020N | Personal_ICs:CPC1020N | D2, D6, D7, D8 |
| 4 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J1, J5, J6, J7 |
| 4 | MountingHole | MountingHole:MountingHole_6.4mm_M6_DIN965 | H1, H2, H3, H4 |
| 3 | 1 µF | Capacitor_SMD:C_0603_1608Metric | C26, C33, C44 |
| 3 | 150 Ohm | Resistor_SMD:R_0603_1608Metric | R22, R23, R24 |
| 3 | 2.2 µF | Capacitor_SMD:C_0603_1608Metric | C23, C24, C41 |
| 2 | 120 R @ 100 MHz, 6 A | Inductor_SMD:L_0805_2012Metric | L5, L6 |
| 2 | 18 µF | Capacitor_THT:CP_Radial_D12.5mm_P5.00mm | C15, C59 |
| 2 | 2 MOhm | Resistor_SMD:R_1206_3216Metric | R5, R25 |
| 2 | 2.7 kOhm | Resistor_SMD:R_0603_1608Metric | R15, R16 |
| 2 | 30 kOhm | Resistor_SMD:R_0603_1608Metric | R1, R3 |
| 2 | ST1S41PHR | Personal_ICs:ST1S41PHR | U1, U2 |
| 1 | 1 µF | Capacitor_THT:C_Rect_L24.0mm_W10.1mm_P22.50mm_MKT | C17 |
| 1 | 1.5 kOhm | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 10 µF | Capacitor_SMD:C_0603_1608Metric | C40 |
| 1 | 100 R | Resistor_SMD:R_0603_1608Metric | R30 |
| 1 | 100 kOhm | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 100 nF | Capacitor_SMD:C_1210_3225Metric | C16 |
| 1 | 110 nF | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 120 pF | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 12V | TestPoint:TestPoint_Pad_D2.0mm | TP2 |
| 1 | 150 pF | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 150060VS55040 | Personal_Passives:150060VS55040 | LED3 |
| 1 | 150060YS55040 | Personal_Passives:150060VS55040 | LED2 |
| 1 | 29.4 kOhm | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 3V3 | TestPoint:TestPoint_Pad_D2.0mm | TP3 |
| 1 | 4.7 µF | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 40 µH | Inductor_SMD:L_Bourns-SRN4018 | L2 |
| 1 | 47 Ohm | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 470 nF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 5 nF | Capacitor_SMD:C_0603_1608Metric | C21 |
| 1 | 5.69 kOhm | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 5V | TestPoint:TestPoint_Pad_D2.0mm | TP4 |
| 1 | 6.8 µF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C14 |
| 1 | 64600001003 | Personal_Misc:64600001003 | F1 |
| 1 | 680 pF | Capacitor_THT:C_Disc_D8.0mm_W5.0mm_P10.00mm | C13 |
| 1 | 9.65 kOhm | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 909 kOhm | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | B360 | Diode_SMD:D_SMC | D5 |
| 1 | BAT54J | Diode_SMD:D_SOD-323F | D3 |
| 1 | BK1608HS601-T | Personal_Passives:BK1608HS601-T | L4 |
| 1 | BZX84C24LT1G | Diode_SMD:D_SOT-23_ANK | D4 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J8 |
| 1 | Conn_WallPlug | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | ECS-5032MV-100-CN-TR | Personal_Actives:ECS5032MV250CNTR | X1 |
| 1 | EFD 20/10/7 | SamacSys_Parts:B66418W1008D1 | T1 |
| 1 | IS42S16400J-xT | Package_SO:TSOP-II-54_22.2x10.16mm_P0.8mm | U5 |
| 1 | M50-3610742 | SamacSys_Parts:M503610742R | J4 |
| 1 | QSH-030-01-F-D-A-K-TR | Personal_Misc:QSH-030-01-F-D-A | J3 |
| 1 | SRN6045TA-101M | Personal_Passives:SRN6045TA-101M | L1 |
| 1 | SRR1208-821KL | Personal_Passives:SRR1208-821KL | L3 |
| 1 | STM32F469IITx | Package_QFP:LQFP-176_24x24mm_P0.5mm | U4 |
| 1 | VIPER318HDTR | Personal_ICs:VIPER318HDTR | U3 |
| 1 | W25Q32JVSS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U6 |
| 1 | YBS2207G_RAG | Personal_Passives:YBS2207G_RAG | D1 |
More from SR-Madsen/CocktailMachine
1Similar boards
- 4 layers40 × 46 mm
- 6 layers76.5 × 339.8 mm
Fmc host
open-ephys/onix-fmc-host
FMC board to acquire from ONIX headstages and breakout boards
320 parts5 - 4 layers139 × 59.7 mm
- 4 layers100 × 82 mm
EMBARCADOS CURSO PCB
andremdaraujo/EMBARCADOS-CURSO-PCB
Projeto desenvolvido durante o curso Projeto de PCB para Sistemas Embarcados
175 parts9 - 4 layers80 × 60 mm
Winglet Carrier
TL-Embedded/Winglet-Carrier
This is a development board to faciliate testing of the winglet modems.
69 parts - 4 layers190 × 90 mm
- 2 layers44 × 44 mm
- 2 layers150 × 62.5 mm
Questions
How big is the Powersupply PCB?
It measures 145 × 99.1 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Powersupply use?
136 parts, built around the ST1S41PHR, W25Q32JVSSIQ, 150060SS55040 and CPC1020N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Powersupply KiCad files?
From the SR-Madsen/CocktailMachine repository on GitHub, at the commit this page was made from: the board is PCBV1/Powersupply.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Powersupply design in my own project?
Its repository states no licence, so its author keeps all rights: ask SR-Madsen before reusing the design.