2 layers56.3 × 77 mm
4 layers50 × 75.2 mm
RpiFly v3
r3dpath/RpiFly_Hardware1While most of the functionality here has been tested to work theres certainally some marginal design decisions, just beware.
- Size
- 50 × 75.2 mm
- Copper layers
- 4
- Thickness
- 1.63 mm
- Parts
- 108
- Nets
- 119
- Pads
- 474
- Tracks, vias
- 771, 154
- Pours
- 17
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 12 Mar 2024
- Updated
- 12 Mar 2024
Overview
RpiFly v3 is an open-source printed circuit board by r3dpath, from the r3dpath/RpiFly_Hardware repository on GitHub. It is a 4-layer board of 50 × 75.2 mm with 108 parts on 119 nets, routed with 771 tracks and 154 vias.
It is built around the RP2040, AP62200WU-7-52 and LPS22DF, with the W25Q64JVSSIQ, ICM-20649 and LM1117T-3.3 among its other parts. Its parts include 34 capacitors, 29 resistors, 10 ICs, 9 connectors and 7 diodes. It belongs with the RP2040 boards of this library.
Main components
12
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
AP62200WU-7-52
TSOT-26-40℃~+85℃@(TA) 1 2A 4.2V~18V 740kHz 800mV~7V Adjustable Buck Buck Built-in Yes TSOT-26 DC-DC Converters ROHSDiodes IncorporatedDC-DC Converters
LPS22DF
HLGA-10(2x2)-40℃~+85℃ 0.015hpa 0.5hpa 1.7V~3.6V 26Kpa~1.26bar 900nA I2C、SPI、I3C HLGA-10(2x2) Pressure Sensors ROHSSTMicroelectronicsPressure Sensors
W25Q64JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 10uA 133MHz 150ms@(64KB) 2.7V~3.6V 20 Years 3ms 64Mbit SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
ICM-20649
QFN-24(3x3)-40℃~+85℃ 1.71V~3.6V 16bit 8uA IMU (accelerometer + gyroscope) SPI、I2C X,Y,Z X,Y,Z ±30g ±4000dps 运动事件检测 QFN-24(3x3) Accelerometers ROHSTDK InvenSenseAccelerometers
LM1117T-3.3
TO-220-3L-40℃~+125℃@(Tj) 0.003%Vout 1 1.25V@(1A) 10mA 15V 1A 3.3V 75dB@(120Hz) Fixed Over Current Protection、Thermal shutdown Positive TO-220-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHGSEMIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LSM6DSM
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 4KB Accelerometer Gyroscope SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps LGA-14(2.5x3) Accelerometers ROHSSTMicroelectronicsAccelerometers
CUS10S30
SOD-323Schottky DiodesDOWO
PTS645SM43SMTR92LFS
SMD-4P,6x6mm-20℃~+85℃ 1.6N 12V 4.3mm 50mA 6mm 6mm Gull Wing Round Button SPST Surface Mount,Vertical SMD-4P,6x6mm Tactile Switches ROHSC&KTactile Switches
10118194-0001LF
SMD-30℃~+80℃ 1 100V 5P Black Female Micro-B USB 2.0 SMD USB Connectors ROHSAmphenolUSB Connectors
ABLS-12.000MHZ-B4-T
HC-49S-SMD-20℃~+70℃ 12MHz 18pF 50Ω ±30ppm ±50ppm HC-49S-SMD Crystals ROHSAbraconCrystals
EG1218
插件-20℃~+70℃ 11.6mm 200mA 30V 4mm 7.4mm Black PC Pin Rectangular Columnar SPDT Through Hole Plugin Slide Switches ROHSE-SwitchSlide Switches
README
README.mdRpiFly V3 Hardware
While most of the functionality here has been tested to work theres certainally some marginal design decisions, just beware.
Parts
108| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C13, C14, C23, C24, C25, C26, C27, C28, C29, C30, C31, C32, C33 +5 |
| 9 | 0R | Resistor_SMD:R_0603_1608Metric | R14, R18, R19, R20, R25, R26, R27, R28, R29 |
| 8 | 10k | Resistor_SMD:R_0603_1608Metric | R6, R7, R8, R12, R13, R16, R22, R24 |
| 4 | 10u | Capacitor_SMD:C_0603_1608Metric | C15, C18, C20, C34 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R5, R21, R23 |
| 4 | 330 | Resistor_SMD:R_0603_1608Metric | R9, R10, R11, R17 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | 1u | Capacitor_SMD:C_0603_1608Metric | C9, C10, C19 |
| 3 | B1931UD | LED_SMD:LED_0603_1608Metric | D2, D3, D4 |
| 2 | 22u | Capacitor_SMD:C_0603_1608Metric | C16, C17 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | 27p | Capacitor_SMD:C_0603_1608Metric | C11, C12 |
| 2 | CUS10S30 | Diode_SMD:D_SOD-323 | D5, D6 |
| 2 | DNP | Capacitor_SMD:C_0603_1608Metric | C21, C22 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | MountingHole | MountingHole:MountingHole_1.1mm_M1_Pad | H5, H6 |
| 2 | PTS645SM43SMTR92_LFS | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | S2, S3 |
| 2 | TPS259620 | Package_SO:Texas_R-PDSO-G8_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalVias | U5, U6 |
| 1 | 10118194-0001LF | Connector_USB:USB_Micro-B_Amphenol_10118194_Horizontal | J1 |
| 1 | 15V | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D7 |
| 1 | 31.6k | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 3V3 | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | 3V3A | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | 4.7u | Inductor_SMD:L_Taiyo-Yuden_NR-60xx | L1 |
| 1 | ABLS-12.000MHZ-B4-T | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | ADXL314 | Package_CSP:LFCSP-32-1EP_5x5mm_P0.5mm_EP3.6x3.6mm | U7 |
| 1 | AP62200WU-7 | Package_TO_SOT_SMD:TSOT-23-6 | U3 |
| 1 | B1931UD | Diode_SMD:D_0603_1608Metric | D1 |
| 1 | Battery Connector | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J2 |
| 1 | DNF | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | Debug Connector | Connector_JST:JST_SH_SM06B-SRSS-TB_1x06-1MP_P1.00mm_Horizontal | J9 |
| 1 | EG1224 | Button_Switch_THT:SW_E-Switch_EG1224_SPDT_Angled | S1 |
| 1 | Extension Connector | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J8 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | ICM-20649 | Package_DFN_QFN:QFN-24-1EP_3x3mm_P0.4mm_EP1.75x1.6mm | U10 |
| 1 | LM1117T-3.3 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U4 |
| 1 | LPS22DF | Package_LGA:ST_HLGA-10_2.5x2.5mm_P0.6mm_LayoutBorder3x2y | U8 |
| 1 | LSM6DSM | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U9 |
| 1 | PKM13EPYH4000 | Buzzer_Beeper:PKM13EPYH4000 | BZ1 |
| 1 | PSwitch1 | Connector_JST:JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | J5 |
| 1 | PSwitch2 | Connector_JST:JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | J6 |
| 1 | P_SWITCH 1 Selector | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | P_SWITCH 2 Selector | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | Radio Connector | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J7 |
| 1 | SCL Test Point | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | SDA Test Point | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | W25Q64JVSSIQ | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U2 |
Similar boards
- 2 layers150 × 62.5 mm
- 8 layers50 × 50 mm
- 4 layers34 × 45 mm
Zigbee Air Sensor
acha666/Zigbee-Air-Sensor
Low power air sensor with E-ink screen and ESP32-H2
89 parts1GPL-3.0 - 4 layers43.7 × 40.9 mm
Adam's Drone FCU
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
82 parts915 - 4 layers75.5 × 50.5 mm
Drone arm
iamdarshg/drone-arm
Reworked cheaper, maybe faster but less redundant drone controller.
112 parts2 - 2 layers18 × 9 mm
- 2 layers102.7 × 40 mm
Questions
How big is the RpiFly v3 PCB?
It measures 50 × 75.2 mm and has 4 copper layers, 1.63 mm thick.
What parts does the RpiFly v3 use?
108 parts, built around the RP2040, AP62200WU-7-52, LPS22DF and W25Q64JVSSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RpiFly v3 KiCad files?
From the r3dpath/RpiFly_Hardware repository on GitHub, at the commit this page was made from: the board is RpiFly v3/RpiFly v3.kicad_pcb and its schematic RpiFly v3/RpiFly v3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RpiFly v3 design in my own project?
Its repository states no licence, so its author keeps all rights: ask r3dpath before reusing the design.