Skip to the content

Boards using the ADXL375BCCZ

15 boards

Boards in 13 GitHub repositories, designed in KiCad, that use the ADXL375BCCZ by Analog Devices (-40℃~+85℃ 100nA 16bit 2V~3.6V Accelerometer SPI、I2C X,Y,Z ±200g LGA-14(3x5) Accelerometers ROHS). See how each wires it, with its parts, size, README and files; the ADXL375BCCZ’s symbol, footprint and pinout are on its own page.

  • 4 layers33 × 90 mmActive drag system, the printed circuit board in 3D

    Active drag system

    RocketryVT/active-drag-system

    Eigen Library, cmake, and arm-none-eabi-gcc tooling required for successful build.

    100 parts6MIT
  • 6 layers90 × 45 mmHw tele stern, the printed circuit board in 3D

    Hw tele stern

    shorlee/TeleSTERN

    The TeleSTERN Project is an Open Source Rocketry Flight Computer based on the TeleMega by Altus Metrum.

    303 parts3GPL-3.0
  • 4 layers42 × 65 mmIcarus Flight Computer, the printed circuit board in 3D

    Icarus Flight Computer

    daedalus-ind/icarus-hardware

    Hardware of the onboard flight computer for the Icarus rocket.

    106 parts2MIT
  • 4 layers38 × 100 mmDAQ V4.1, the printed circuit board in 3D

    DAQ V4.1

    IlyaasAitSimmou/krakenbane_one_pcb

    This GitHub Repository contains all kiCad files related to the SRAD data aqcuisition flight computer, KRAKENBANE I which was flown at Launch Canada on the Goldeneye rocket by the Turner Fenton Rocketry Association…

    82 parts1
  • 2 layers82.3 × 75.7 mmAir Schematic v1, the printed circuit board in 3D

    Air Schematic v1

    UCLA-Rocket-Project/Air-Schematic-v1

    19 parts1
  • 2 layers48.3 × 20.3 mmSensor board, the printed circuit board in 3D

    Sensor board

    chaxaf/Nordend-boards

    Sample of PCBs from the Nordend rocket

    34 parts
  • 4 layers50 × 80 mmHPR FC G474 3S, the printed circuit board in 3D

    HPR FC G474 3S

    itsTasos/InvictusOne-Flight-Computer

    KiCad hardware design for an STM32G474-based flight-data computer for high-power model rockets, with inertial and pressure sensors, CAN-FD, and onboard flash storage.

    127 parts
  • 4 layers90 × 75 mmARLISS STM32 2026, the printed circuit board in 3D

    ARLISS STM32 2026

    JosephPalacios-so/CANSAT_ARLISS_STM32

    121 parts
  • 6 layers50 × 50 mmNeptune imu, the printed circuit board in 3D

    Neptune imu

    onionsat-pcbs/neptune-imu

    Project Neptune IMU PCB

    38 partsAGPL-3.0
  • 4 layers30.6 × 20.5 mmImpact measure, the printed circuit board in 3D

    Impact measure

    paltus23/impact_meter_pcb

    Device with accelerometer on ESP32-C3

    63 parts
  • 4 layers33 × 81.8 mmActive drag system minimal, the printed circuit board in 3D

    Active drag system minimal

    RocketryVT/active-drag-system

    Eigen Library, cmake, and arm-none-eabi-gcc tooling required for successful build.

    86 parts6MIT
  • 4 layers76.2 × 48.3 mmMain Module, the printed circuit board in 3D

    Main Module

    Rowan-Rocketry/SRAD-Avionics

    49 parts1
  • 4 layers80 × 80 mm2026 FH2 C AV FC, the printed circuit board in 3D

    2026 FH2 C AV FC

    EPFLRocketTeam/2026_C_AV_HARDWARE

    Repository containing PCBs files of FH2 Avionics

    267 parts
  • 4 layers80 × 80 mm2026 FH2 C AV FC, the printed circuit board in 3D

    2026 FH2 C AV FC

    EPFLRocketTeam/2026_C_AV_HARDWARE

    Repository containing PCBs files of FH2 Avionics

    260 parts