Skip to the content
4 layers66.5 × 57 mmCANNode, the printed circuit board in 3D

CANNode

wiebel/CANNode2

Homegrown CAN/OW based home automation.

Full screenGitHub.kicad_pcb
Size
66.5 × 57 mm
Copper layers
4
Thickness
1.6 mm
Parts
51
Nets
43
Pads
182
Tracks, vias
423, 15
Pours
4
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
3 Jun 2016
Updated
18 Feb 2021

Overview

CANNode is an open-source printed circuit board by wiebel, from the wiebel/CANNode repository on GitHub. It is a 4-layer board of 66.5 × 57 mm with 51 parts on 43 nets, routed with 423 tracks and 15 vias.

It is built around the MAX3485ED, SN65HVD230D and PCA9306D. Its parts include 11 capacitors, 10 resistors, 9 connectors and 5 ICs. It belongs with the home automation and IoT boards and the NXP (LPC, Kinetis, i.MX RT) boards of this library.

Main components

3

README

README.md

Homegrown CAN/OW based home automation.

https://wiebel.org/CANNode/

Parts

51
QtyValueFootprintReferences
11CCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11
64.7kResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR4, R5, R7, R8, R9, R10
4MountingHoleMountingHole:MountingHole_2.7mmH1, H2, H3, H4
3120Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR1, R2, R3
2Conn_01x0400_mylib:OWN_KF141V-P4_simpleJ2, J5
2Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ7, J9
2Conn_01x0400_mylib:WAGO_243_4-PoleJ1, J6
2Jumper_3_Bridged12Jumper:SolderJumper-3_P1.3mm_Bridged2Bar12_RoundedPad1.0x1.5mm_NumberLabelsJP1, JP3
2Logo00_mylib:LOGO_MIDLog1, Log3
2LogoSymbol:OSHW-Logo_5.7x6mm_CopperLog2, Log4
2MAX3485Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU1, U4
1200kResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR6
1Conn_01x0300_mylib:WAGO_243_3-PoleJ8
1Conn_01x10Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_VerticalJ3
1Conn_02x03_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJP4
1Conn_02x04_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_VerticalJ4
1DSN-MINI-36000_mylib:OWN_DC-DCMOD1
1Jumper_NC_SmallConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP2
1PCA9306Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU5
1SN65HVD230Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU2
1Teensy3.2teensy:Teensy3_minU3

The 48 most common of 51 parts.

More from wiebel/CANNode

2
  • 2 layers25 × 12.5 mmDiffWS2811, the printed circuit board in 3D

    DiffWS2811

    wiebel/CANNode

    Homegrown CAN/OW based home automation.

    12 parts2
  • 2 layers17 × 10.7 mmDiffWS2811 min, the printed circuit board in 3D

    DiffWS2811 min

    wiebel/CANNode

    Homegrown CAN/OW based home automation.

    10 parts2

Similar boards

  • 2 layers120 × 80 mmRx72t 100 pga usb, the printed circuit board in 3D

    Rx72t 100 pga usb

    hirakuni45/RX

    Renesas RX Microcontroller, C++ framework, Library, Sample

    113 parts86BSD-3-Clause
  • 4 layers100 × 75 mmOpenAirScope, the printed circuit board in 3D

    OpenAirScope

    emertcakir/OpenAirScope

    Open-source air quality and environmental monitoring node with STM32H743 + ESP32-C3, LoRaWAN, RS485, USB-C, Li-ion charging, and multi-sensor support.

    282 parts26MIT
  • 6 layers133.1 × 133.1 mmAERIS H743-PCB, the printed circuit board in 3D

    AERIS H743-PCB

    7903555032/AERIS-H743-PCB

    A 6-layer STM32H743-based embedded development and flight-control/data-logging PCB designed as a practical hardware-design and PCB-layout project.

    114 parts1
  • 2 layers139.9 × 85.8 mmPas hw, the printed circuit board in 3D

    Pas hw

    NGOQUOC98/ESP32_MODBUS_PCB_MASTER

    This project was in development phase - we will remove this remark after release

    198 parts1
  • 2 layers90 × 48.9 mmEsp32 octal wled, the printed circuit board in 3D

    Esp32 octal wled

    klaus-liebler/esp32_octal_wled

    79 partsMIT
  • 2 layers40.2 × 35.8 mmSensactDoorControl, the printed circuit board in 3D

    SensactDoorControl

    klaus-liebler/sensact

    Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier…

    57 parts4Apache-2.0
  • 4 layers94 × 50.8 mmUlx3s, the printed circuit board in 3D

    Ulx3s

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    235 parts744MIT
  • 8 layers120 × 60 mmDFTBoard, the printed circuit board in 3D

    DFTBoard

    juliancoy/zynqPCB

    An 8-layer board in Kicad built upon Xilinx Zynq Chip. Includes sound output, HDMI, DDR3, and Arduino Uno style header for screen connection

    299 parts75MIT

Questions

How big is the CANNode PCB?

It measures 66.5 × 57 mm and has 4 copper layers, 1.6 mm thick.

What parts does the CANNode use?

51 parts, built around the MAX3485ED, SN65HVD230D and PCA9306D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the CANNode KiCad files?

From the wiebel/CANNode repository on GitHub, at the commit this page was made from: the board is Hardware/kicad/CANNode.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the CANNode design in my own project?

Its repository states no licence, so its author keeps all rights: ask wiebel before reusing the design.