vmfachini/LumibotDesenvolvimento de um Hardware Livre, com uso de energia limpa, baseado no micro:bit para criar robôs móveis acessíveis, promovendo ensino de robótica, pensamento computacional e sustentabilidade no Brasil.
PCB MAQUEEN V1 is an open-source printed circuit board by vmfachini, from the vmfachini/Lumibot repository on GitHub, published under the MIT licence. It is a 2-layer board of 90 × 100 mm with 62 parts on 70 nets, routed with 369 tracks and 78 vias.
It is built around the LM358, TCRT5000 and DW01A, with the HC-SR04, LM1117MP-3.3 and MX1508 among its other parts. Its parts include 13 resistors, 11 capacitors, 11 diodes, 8 ICs and 5 connectors.
Desenvolvimento de um Hardware Livre, com uso de energia limpa, baseado no micro:bit para criar robôs móveis acessíveis, promovendo ensino de robótica, pensamento computacional e sustentabilidade no Brasil.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | Capacitor_SMD:C_0805_2012Metric | C3, C8, C9, C10, C11 |
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C4, C5 |
| 4 | 1K | Resistor_SMD:R_0805_2012Metric | R2, R4, R5, R7 |
| 4 | MountingHole | Footprint_lib_user:Espacador | H1, H2, H3, H4 |
| 4 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D13, D14, D15, D16 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R11, R14 |
| 2 | 200 | Resistor_SMD:R_0805_2012Metric | R10, R13 |
| 2 | 330 | Resistor_SMD:R_0805_2012Metric | R12, R15 |
| 2 | C_Pol | Capacitor_SMD:CP_Elec_6.3x5.9 | C6, C7 |
| 2 | LED RED | LED_SMD:LED_0805_2012Metric | D1, D4 |
| 2 | POT. 10K | Potentiometer_SMD:Potentiometer_Bourns_3314G_Vertical | RV1, RV2 |
| 2 | TCRT5000 | TCRT5000:OPTO_TCRT5000 | U7, U8 |
| 1 | 1.2K | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | BAT/PAINEL | Footprint_lib_user:SW_DESLIZANTE | SW3 |
| 1 | BZV55B5V1 | Diode_SMD:D_MiniMELF | D5 |
| 1 | Battery | Battery:BatteryHolder_Keystone_1042_1x18650 | BT1 |
| 1 | DMP1045U | Footprint_lib_user:DMP1045U | Q2 |
| 1 | DW01A | Footprint_lib_user:DW01A | U1 |
| 1 | FS8205A | Footprint_lib_user:FS8205A | Q1 |
| 1 | HC-SR04 | HC-SR04:XCVR_HC-SR04 | U6 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D9 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D12 |
| 1 | LED GREEN | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | LM1117MP-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | LM358 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | LOGO | LOGO | G*** |
| 1 | MIC127-140-A01 | MIC127-140-A01:DONGGUAN_MIC127-140-A01 | J2 |
| 1 | MOT_1 | Footprint_lib_user:Motor_N20_com_case | J3 |
| 1 | MOT_2 | Footprint_lib_user:Motor_N20_com_case | J5 |
| 1 | MX1508 | Footprint_lib_user:MX1508 | U4 |
| 1 | MountingHole | Footprint_lib_user:Painel_solar | H5 |
| 1 | ON/OFF | Footprint_lib_user:SW_DESLIZANTE | SW1 |
| 1 | ON/OFF LINE FOLLOW | Footprint_lib_user:SW_DESLIZANTE | SW2 |
| 1 | Painel solar | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | SS34 | Footprint_lib_user:SS34 | D3 |
| 1 | TP4056 | Footprint_lib_user:TP4056 | U2 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex_47346-0001 | J1 |
vmfachini/Lumibot
Desenvolvimento de um Hardware Livre, com uso de energia limpa, baseado no micro:bit para criar robôs móveis acessíveis, promovendo ensino de robótica, pensamento computacional e sustentabilidade no Brasil.
vmfachini/Lumibot
Desenvolvimento de um Hardware Livre, com uso de energia limpa, baseado no micro:bit para criar robôs móveis acessíveis, promovendo ensino de robótica, pensamento computacional e sustentabilidade no Brasil.
louismomo66/field-eyes_pcb
Open fieldeyesv2.kicadpro in KiCad 9. The whole circuit is one flat schematic (fieldeyesv2.kicadsch): all 168 parts are on a single page, in four framed sections.
Circuit-Digest/ESP32-Cam-Surveillance-Car
Watch full video on ESP32 surveillance car
I-AM-ENGINEER/AudMX
Alternative for Deej ( https://github.com/omriharel/deej ) with more features
potpurri/LiPo_Charger_TP4056_BuckBoost_TPS63020
This PCB is designed to safely charge a lithium-ion cell and provide a selectable 3.3V or 5V output. It's equipped with components that ensure safe charging and protection for the battery and supports flexible output…
GuzziFlipFlops/ESP32-Walkie-Talkie
An open source ESPNOW based walkie talkie with a 600 meter tested distance, with an OLED and multiple buttons to interact with
It measures 90 × 100 mm and has 2 copper layers, 1.6 mm thick.
62 parts, built around the LM358, TCRT5000, DW01A and HC-SR04. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the vmfachini/Lumibot repository on GitHub, at the commit this page was made from: the board is PCBs/PCB_MAQUEEN_V2/PCB_MAQUEEN_V1.kicad_pcb and its schematic PCBs/PCB_MAQUEEN_V1/Digital.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).