Skip to the content
12345678910111213141516

MX1508

MixicExtended

SOP-16 New Arrivals ROHS

Part id
mixic/MX1508
Category
Uncategorised
Package
SOP-16
Pins
16
In stock
0 at JLCPCB (C717680)
Used on
17 open-source boards

Overview

The MX1508 is an uncategorised made by Mixic in a SOP-16 package with 16 pins. SOP-16 New Arrivals ROHS.

PCBKit's library has its footprint (Package_SO:SOIC-16_3.9x9.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C717680). 17 open-source boards in 12 repositories on GitHub use it.

Symbol

The library has no symbol for this part yet.

Footprint

12345678910111213141516
Package_SO:SOIC-16_3.9x9.9mm_P1.27mmFrom KiCad's library

Open-source boards using it

17See all 17
  • 2 layersRobot MGR, the printed circuit board in 3D

    Robot MGR

    rayvburn/diff_drive_mapping_robot

    ROS driver for the Raspberry Pi based differential drive robot

    95 parts27
  • 2 layers146.2 × 99 mmFPVRover, the printed circuit board in 3D

    FPVRover

    Circuit-Digest/ESP32-Cam-Surveillance-Car

    Watch full video on ESP32 surveillance car

    35 parts15
  • 4 layers27.5 × 14.5 mmFRReceiverLVH, the printed circuit board in 3D

    FRReceiverLVH

    shaise/OpenSky328

    An atmel implementation of OpenSky FrSky-compatible RX

    33 parts13GPL-3.0
  • 2 layers100 × 100 mmBase esp32, the printed circuit board in 3D

    Base esp32

    jalmx/base_esp32

    Base for esp32 to connect IO

    107 parts2MIT
  • 2 layers118.3 × 68 mmField eyes v2.before spreading, the printed circuit board in 3D

    Field eyes v2.before spreading

    louismomo66/field-eyes_pcb

    Open fieldeyesv2.kicadpro in KiCad 9. The whole circuit is one flat schematic (fieldeyesv2.kicadsch): all 168 parts are on a single page, in four framed sections.

    168 parts
  • 2 layers68.8 × 40 mmEsp32-car, the printed circuit board in 3D

    Esp32-car

    rmingon/esp32-car

    little car connected in wifi or bluetooth

    28 parts
  • 2 layers50 × 79.6 mmMicromouse, the printed circuit board in 3D

    Micromouse

    rmingon/micromouse

    MicroMouse project with infrared captor and 2x4 wheels

    48 parts
  • 2 layers100 × 100 mmRobot lidar, the printed circuit board in 3D

    Robot lidar

    rmingon/robot-lidar

    53 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MX1508?

Yes. the footprint Package_SO:SOIC-16_3.9x9.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MX1508?

SOP-16, with 16 pins. Its footprint is drawn on this page.

Where can I order the MX1508?

JLCPCB lists it as part C717680, with 0 in stock; the sellers' links on this page open their listings.

What can replace the MX1508?

Parts like it in the library: the CD4017BM(LX) by lingxingic, the DAC0800LCMX-TUDI by Tudi, the TL494-SOP-16 by DDF and the SG3525AES by GREENMICRO. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MX1508?

17 boards in 12 repositories on GitHub; the most starred are listed on this page, with their KiCad files.