Skip to the content
2 layers68.8 × 40 mmEsp32-car, the printed circuit board in 3D

little car connected in wifi or bluetooth

Size
68.8 × 40 mm
Copper layers
2
Thickness
1.6 mm
Parts
28
Nets
58
Pads
161
Tracks, vias
289, 69
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
8 Mar 2025
Updated
8 Apr 2025

Overview

Esp32-car is an open-source printed circuit board by rmingon, from the rmingon/esp32-car repository on GitHub. It is a 2-layer board of 68.8 × 40 mm with 28 parts on 58 nets, routed with 289 tracks and 69 vias.

It is built around the CH340C, ESP32-WROOM-32 and AMS1117-3.3, with the MX1508 and BSS138 among its other parts. Its parts include 7 capacitors, 5 resistors, 5 connectors, 4 ICs and 2 diodes. It belongs with the radio and wireless boards and the ESP32 and RISC-V boards of this library.

Main components

5

README

README.md

ESP32 RC Car with Web Control

This project is a simple DIY RC car built using an ESP32, dual motor driver (MX1508), and a web-based controller interface built with Angular. The ESP32 acts as the brain, controlling two DC motors and hosting a lightweight web server for real-time control via Wi-Fi.

ESP32 RC Car

🚗 Features

  • 🔌 Dual motor control using the MX1508 driver
  • 🌐 Wi-Fi hosted Angular web app for control (no mobile app needed!)
  • 🎮 Real-time forward, backward, left, right, and stop commands
  • ⚙️ Easily customizable for future sensors (e.g., ultrasonic, line-following)
  • 💡 Minimal wiring, compact build

🛠 Hardware Used

  • ESP32 wroom
  • MX1508 Dual Motor Driver
  • 2x DC Motors (TT Gear motors or similar)
  • Power Supply (Li-ion battery or USB power bank)
  • Chassis, wheels, jumper wires

🧰 Software Stack

  • ESP32 (Arduino/C++ firmware)
  • Angular (Web UI for car control)
  • HTML / CSS / JS (Frontend)
  • WebSockets or HTTP endpoints (for command communication)

Parts

28
QtyValueFootprintReferences
5CCapacitor_SMD:C_0603_1608MetricC1, C2, C3, C4, C5
5R_SmallResistor_SMD:R_0603_1608MetricR1, R4, R5, R6, R7
3Conn_01x02Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ1, J2, J4
3SW_PushButton_Switch_SMD:SW_SPST_FSMSMBOOT1, BTN1, EN1
2BSS138Package_TO_SOT_SMD:SOT-23Q1, Q2
2C_Polarized_SmallCapacitor_SMD:CP_Elec_6.3x4.9C6, C8
2LEDLED_SMD:LED_0603_1608MetricD1, D2
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U3
1CH340CPackage_SO:SOIC-16_3.9x9.9mm_P1.27mmU1
1Conn_01x06Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ7
1ESP32-WROOM-32RF_Module:ESP32-WROOM-32U2
1MX1508Package_SO:SOIC-16_3.9x9.9mm_P1.27mmU4
1USB_B_MicroConnector_USB:USB_Micro-B_Molex-105017-0001J3

Similar boards

  • 2 layers50 × 50 mmRfid uhf wifi reader, the printed circuit board in 3D

    Rfid uhf wifi reader

    OpenLaundry/wifi-rfid-uhf-reader

    Portable long range RFID uhf reader with WIFI based on esp32

    23 parts8
  • 2 layers92 × 51 mmRs485-spy injector, the printed circuit board in 3D

    Rs485-spy injector

    rmingon/rs485-spy-injector

    RS485 Spy is an open-source hardware tool for real-time monitoring, logging, and testing of RS-485 networks

    44 parts7CERN-OHL-S-2.0
  • 2 layers72 × 25 mmOverWire, the printed circuit board in 3D

    OverWire

    rmingon/OverWire

    Flash and debug STM32 microcontrollers over Wi-Fi. Enterprise-ready ESP32 SWD programming hardware and toolchain integration.

    30 parts2
  • 2 layers100 × 100 mmDesktop light, the printed circuit board in 3D

    Desktop light

    rmingon/desktop-light

    Desktop light ws2812b with warm setting and text writing

    95 parts
  • 2 layers47.5 × 50.3 mmEsp32-lora, the printed circuit board in 3D

    Esp32-lora

    rmingon/esp32-lora

    esp32 with lora rfm95 and nunchuck connector

    28 parts
  • 2 layers48 × 25 mmEsp32-stick, the printed circuit board in 3D

    Esp32-stick

    rmingon/esp32-on-usb

    Board with esp32 on usb stick

    19 parts
  • 2 layers29.7 × 47.8 mmWifi nunchuck, the printed circuit board in 3D

    Wifi nunchuck

    rmingon/wifi-nunchuck-esp32

    Nunchuck with esp32 for use with wifi or bluetooth

    22 parts
  • 2 layers118.4 × 111.3 mmHome Automation, the printed circuit board in 3D

    Home Automation

    vishalsaravanan-k/home-automation-using-esp32-and-relay

    This project is a basic home automation system built using an ESP32, capable of turning appliances ON/OFF through both mobile app (via Wi-Fi) and an IR remote.

    92 parts

Questions

How big is the Esp32-car PCB?

It measures 68.8 × 40 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Esp32-car use?

28 parts, built around the CH340C, ESP32-WROOM-32, AMS1117-3.3 and MX1508. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Esp32-car KiCad files?

From the rmingon/esp32-car repository on GitHub, at the commit this page was made from: the board is hardware/hardware.kicad_pcb and its schematic hardware/hardware.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Esp32-car design in my own project?

Its repository states no licence, so its author keeps all rights: ask rmingon before reusing the design.