Skip to the content
2 layers100 × 100 mmRobot lidar, the printed circuit board in 3D
Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
53
Nets
155
Pads
309
Tracks, vias
597, 111
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
2 Nov 2023
Updated
16 Mar 2025

Overview

Robot lidar is an open-source printed circuit board by rmingon, from the rmingon/robot-lidar repository on GitHub. It is a 2-layer board of 100 × 100 mm with 53 parts on 155 nets, routed with 597 tracks and 111 vias.

It is built around the MX1508 and MPU-6050. Its parts include 19 capacitors, 14 resistors, 11 connectors, 5 ICs and 2 diodes. It belongs with the robots and motor control boards and the STM32 boards of this library.

Main components

2

README

README.md

LIDAR ROBOT WITH OPENCV CAMERA

Alt text

Parts

53
QtyValueFootprintReferences
81 ufCapacitor_SMD:C_0603_1608MetricC1, C4, C5, C6, C7, C8, C12, C13
510KResistor_SMD:R_0603_1608MetricR10, R11, R12, R13, R14
510kResistor_SMD:R_0603_1608MetricR3, R4, R5, R6, R7
4C_Polarized_SmallCapacitor_SMD:CP_Elec_6.3x4.9C18, C19, C22, C23
4Conn_01x02Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ5, J6, J7, J8
3CCapacitor_SMD:C_0603_1608MetricC9, C10, C11
20.1uFCapacitor_SMD:C_0603_1608MetricC14, C15
22kResistor_SMD:R_0603_1608MetricR8, R9
2Conn_01x18Connector_PinHeader_2.54mm:PinHeader_1x18_P2.54mm_VerticalJ9, J10
2LED_SmallResistor_SMD:R_0603_1608MetricD1, D2
2MX1508MX1508:SOIC127P600X177-16NU4, U5
2R_SmallResistor_SMD:R_0603_1608MetricR1, R2
110 ufCapacitor_SMD:C_0603_1608MetricC3
11ufCapacitor_SMD:C_0603_1608MetricC2
1Conn_02x03_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical_SMDJ4
1Conn_ARM_SWD_TagConnect_TC2030Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ1
1CrystalCrystal:Crystal_SMD_HC49-SDY1
1Jack-DCConnector_BarrelJack:BarrelJack_HorizontalJ3
1LM317-3.3_SOT-223Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1MPU-6050Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mmU3
1STM32F429VETxPackage_QFP:LQFP-100_14x14mm_P0.5mmU1
1SW_SPSTButton_Switch_SMD:SW_SPST_CK_RS282G05A3SW1
1USB_AConnector_USB:USB_A_Molex_48037-2200_HorizontalJ11
1YLIDAR X4Connector_Hirose:Hirose_DF13-08P-1.25DSA_1x08_P1.25mm_VerticalJ2

More from rmingon/robot-lidar

1
  • 2 layers75 × 70 mmRobot lidar, the printed circuit board in 3D

    Robot lidar

    rmingon/robot-lidar

    20 parts

Similar boards

  • 2 layersRobot MGR, the printed circuit board in 3D

    Robot MGR

    rayvburn/diff_drive_mapping_robot

    ROS driver for the Raspberry Pi based differential drive robot

    95 parts27
  • 2 layers146.2 × 99 mmFPVRover, the printed circuit board in 3D

    FPVRover

    Circuit-Digest/ESP32-Cam-Surveillance-Car

    Watch full video on ESP32 surveillance car

    35 parts15
  • 4 layers27.5 × 14.5 mmFRReceiverLVH, the printed circuit board in 3D

    FRReceiverLVH

    shaise/OpenSky328

    An atmel implementation of OpenSky FrSky-compatible RX

    33 parts13GPL-3.0
  • 2 layers100 × 100 mmBase esp32, the printed circuit board in 3D

    Base esp32

    jalmx/base_esp32

    Base for esp32 to connect IO

    107 parts2MIT
  • 2 layers118.3 × 68 mmField eyes v2.before spreading, the printed circuit board in 3D

    Field eyes v2.before spreading

    louismomo66/field-eyes_pcb

    Open fieldeyesv2.kicadpro in KiCad 9. The whole circuit is one flat schematic (fieldeyesv2.kicadsch): all 168 parts are on a single page, in four framed sections.

    168 parts
  • 2 layers68.8 × 40 mmEsp32-car, the printed circuit board in 3D

    Esp32-car

    rmingon/esp32-car

    little car connected in wifi or bluetooth

    28 parts
  • 2 layers50 × 79.6 mmMicromouse, the printed circuit board in 3D

    Micromouse

    rmingon/micromouse

    MicroMouse project with infrared captor and 2x4 wheels

    48 parts
  • 2 layers90 × 100 mmPCB MAQUEEN V1, the printed circuit board in 3D

    PCB MAQUEEN V1

    vmfachini/Lumibot

    Desenvolvimento de um Hardware Livre, com uso de energia limpa, baseado no micro:bit para criar robôs móveis acessíveis, promovendo ensino de robótica, pensamento computacional e sustentabilidade no Brasil.

    62 partsMIT

Questions

How big is the Robot lidar PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Robot lidar use?

53 parts, built around the MX1508 and MPU-6050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Robot lidar KiCad files?

From the rmingon/robot-lidar repository on GitHub, at the commit this page was made from: the board is pcb_old/robot-lidar/robot-lidar.kicad_pcb and its schematic pcb/robot-lidar/robot-lidar.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Robot lidar design in my own project?

Its repository states no licence, so its author keeps all rights: ask rmingon before reusing the design.