

KeyBoard Fedevel
A fully custom 4 layers mechanical keyboard PCB based on the RP2040 microcontroller
- Size
- 73.1 × 111.9 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 124
- Nets
- 86
- Pads
- 398
- Tracks, vias
- 980, 202
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 11 Mar 2026
- Updated
- 11 Mar 2026
Overview
KeyBoard Fedevel is an open-source printed circuit board by tuankoko567, from the tuankoko567/KeyBoard-Board repository on GitHub. It is a 4-layer board of 73.1 × 111.9 mm with 124 parts on 86 nets, routed with 980 tracks and 202 vias.
It is built around the RP2040, W25Q128JVSIQ and LM1117MP-3.3, with the USBLC6-2P6, MX1A-11NN and ABM8-12.000MHZ-B2-T3 among its other parts. Its parts include 37 capacitors, 33 resistors, 23 switches, 14 diodes and 4 ICs. It belongs with the keyboards and input boards and the RP2040 boards of this library.
Main components
7RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHLM1117MP-3.3
SOT-2230℃~+125℃@(Ta) 1 1.2V@(800mA) 15V 3.3V 5mA 75dB@(120Hz) 800mA 99uVrms Fixed Over Current Protection、Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)MX1A-11NN
-Mechanical Keyboard ShaftCHERRYABM8-12.000MHZ-B2-T3
SMD3225-4P-20℃~+70℃ 120Ω 12MHz 18pF ±20ppm ±50ppm SMD3225-4P Crystals ROHSAbraconCrystalsBZT52C5V1
SOD-1231 Independent 130Ω 2uA 4.85V~5.36V 5.1V 500mW SOD-123 Zener Diodes ROHSMDDZener Diodes
README
README.mdKeyBoard-Board
A fully custom 4 layers mechanical keyboard PCB based on the RP2040 microcontroller
Parts
124| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 100nF | IVS_FOOTPRINTS:C_0603 | C1, C2, C3, C4, C5, C6, C7, C15, C16, C19, C20, C21, C22, C23, C27, C37 +2 |
| 13 | 10k | IVS_FOOTPRINTS:R_0603 | R10, R20, R21, R22, R23, R25, R26, R27, R28, R29, R30, R31, R32 |
| 12 | D | IVS_FOOTPRINTS:Package-Diode-D_SOD_123 | D7, D8, D9, D10, D11, D12, D13, D14, D15, D16, D17, D18 |
| 9 | MX1A-11NN | MX1A-11NN:SW_MX1A-11NN | S10, S11, S12, S13, S14, S15, S16, S17, S18 |
| 9 | PG151101S11 | PG151101S11:SW_PG151101S11 | S1, S2, S3, S4, S5, S6, S7, S8, S9 |
| 7 | 2.2uF | IVS_FOOTPRINTS:C_0603 | C10, C11, C12, C26, C29, C32, C34 |
| 6 | 10nF | IVS_FOOTPRINTS:C_0603 | C24, C25, C28, C30, C31, C33 |
| 6 | 27R | IVS_FOOTPRINTS:R_0603 | R2, R3, R11, R14, R15, R16 |
| 5 | 0R | IVS_FOOTPRINTS:R_0603 | R6, R17, R18, R19, R24 |
| 4 | MountingHole | IVS_FOOTPRINTS:MH_7.5x3.2mm_RF | H1, H2, H3, H4 |
| 4 | Standoff | IVS_FOOTPRINTS:standoff_9774035151R_M2.5 | H5, H6, H7, H8 |
| 3 | 1k | IVS_FOOTPRINTS:R_0603 | R8, R12, R13 |
| 3 | 5k1 | IVS_FOOTPRINTS:R_0603 | R4, R5, R7 |
| 3 | RotaryEncoder_Switch | IVS_FOOTPRINTS:RotaryEncoder-Vert-THT-Alps_EC11E_Switch_H20mm | SW3, SW4, SW5 |
| 2 | 10uF | IVS_FOOTPRINTS:C_0603 | C35, C36 |
| 2 | 15pF | IVS_FOOTPRINTS:C_0603 | C17, C18 |
| 2 | 1uF | IVS_FOOTPRINTS:C_0603 | C13, C14 |
| 2 | LED | IVS_FOOTPRINTS:LED_0805 | POWER, USER |
| 2 | SW_MEC_5E | tactile_switch_6x6mm:SW_SWT0315-050025GSA_REVA | SW6, SW7 |
| 1 | 100R | IVS_FOOTPRINTS:R_0603 | R1 |
| 1 | 100k | IVS_FOOTPRINTS:R_0603 | R9 |
| 1 | 1K | IVS_FOOTPRINTS:R_0603 | R33 |
| 1 | 1N5819 | Diode_SMD:D_SMA | D2 |
| 1 | ABM8-12.000MHZ-B2-T3 | ABM8_12MHZ:XTAL_ABM8-12.000MHZ-B2-T3 | Y1 |
| 1 | BZT52C5V1 | IVS_FOOTPRINTS:Package-Diode-D_SOD_123 | D1 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J102 |
| 1 | LM1117MP-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-563 | U4 |
| 1 | USB_C_Receptacle | IVS_FOOTPRINTS:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J101 |
| 1 | W25Q128JVSIQ | SOIC-8:SOIC127P790X216-8N | U3 |
Similar boards
- 2 layers175.5 × 99.3 mm

- 4 layers70 × 69.8 mm

- 4 layers180.8 × 300.3 mm

Dilemma
Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.
383 parts590 - 4 layers94.4 × 72.8 mm

RP2040 base
Twisted-Fields/rp2040-motor-controller
A dual channel brushless motor controller based on the RP2040 microcontroller, designed in Kicad.
325 parts419 - 2 layers41.6 × 77.6 mm

- 2 layers172 × 107.7 mm

- 2 layers475 × 139.9 mm

Skogaslider main pcb
skogaby/skogaslider
Firmware, CAD, and PCB files for the skogaslider, an RP2040-based controller to simulate Chunithm's gameplay experience
175 parts18MIT - 4 layers65.4 × 66.8 mm

Pico FT232H pair
Erhannis/EPC611_high_speed_camera
Turn a $13 ToF 8x8 sensor into a 4000fps high speed camera.
62 parts3
Questions
How big is the KeyBoard Fedevel PCB?
It measures 73.1 × 111.9 mm and has 4 copper layers, 1.6 mm thick.
What parts does the KeyBoard Fedevel use?
124 parts, built around the RP2040, W25Q128JVSIQ, LM1117MP-3.3 and USBLC6-2P6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the KeyBoard Fedevel KiCad files?
From the tuankoko567/KeyBoard-Board repository on GitHub, at the commit this page was made from: the board is KeyBoard_Fedevel.kicad_pcb and its schematic KeyBoard_Fedevel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the KeyBoard Fedevel design in my own project?
Its repository states no licence, so its author keeps all rights: ask tuankoko567 before reusing the design.