Skip to the content
4 layers65.4 × 66.8 mmPico FT232H pair, the printed circuit board in 3D

Turn a $13 ToF 8x8 sensor into a 4000fps high speed camera.

Size
65.4 × 66.8 mm
Copper layers
4
Thickness
1.56 mm
Parts
62
Nets
76
Pads
302
Tracks, vias
636, 61
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
7 Jul 2023
Updated
8 Oct 2025

Overview

Pico FT232H pair is an open-source printed circuit board by Erhannis, from the Erhannis/EPC611_high_speed_camera repository on GitHub. It is a 4-layer board of 65.4 × 66.8 mm with 62 parts on 76 nets, routed with 636 tracks and 61 vias.

It is built around the RP2040, W25Q128JVSIQ and USBLC6-2P6, with the AP2112K-3.3 and FT232H among its other parts. Its parts include 28 capacitors, 15 resistors, 7 ICs, 2 connectors and 2 inductors. It belongs with the RP2040 boards of this library.

Main components

5

Parts

62
QtyValueFootprintReferences
10100nFCapacitor_SMD:C_0402_1005MetricC5, C6(P10)1, C7(P1)1, C8, C8(P22)1, C9(P42)1, C10(P49)1, C12(P33)1, C13(P23)1, C15(P50)1
510KResistor_SMD:R_0402_1005MetricR4, R7, R8, R9, R10
54u7Capacitor_SMD:C_0402_1005MetricC13(P8)1, C16(P3)1, C17(P46)1, C18(P12)1, C19(P24)1
4100nCapacitor_SMD:C_0402_1005MetricC9(P38)1, C10(P37)1, C11(P39)1, C14(P40)1
427Resistor_SMD:R_0402_1005MetricR2, R3, R14, R15
435pFCapacitor_SMD:C_0402_1005MetricC3, C4, C6, C7
4MountingHole_PadMountingHole:MountingHole_2.5mm_PadH1, H2, H3, H4
210uFCapacitor_SMD:C_0805_2012MetricC1, C2
212MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1, Y2
21MResistor_SMD:R_0402_1005MetricR1, R13
21uFCapacitor_SMD:C_0402_1005MetricC11(P43n44)1, C14(P45)1
2600R/0.5AInductor_SMD:L_0805_2012MetricL1, L2
2USBLC6-2P6Package_TO_SOT_SMD:SOT-666U3, U7
2USB_B_MicroConnector_USB:USB_Micro-B_XKB_U254-051T-4BH83-F1SFTDI_USB1, RP_USB1
112kResistor_SMD:R_0402_1005MetricR12
11KResistor_SMD:R_0402_1005MetricR5
11kResistor_SMD:R_0402_1005MetricR6
12KResistor_SMD:R_0402_1005MetricR11
14u7Capacitor_SMD:C_0603_1608MetricC15
193LCxxBPackage_TO_SOT_SMD:SOT-23-6U6
1AP2112K-3.3Package_TO_SOT_SMD:SOT-23-5U5
1Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2
1Conn_01x20_PinConnector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_VerticalJ1
1FT232HPackage_QFP:LQFP-48-1EP_7x7mm_P0.5mm_EP3.6x3.6mmU2
1RP2040Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mmU1
1W25Q128JVSPackage_SO:SOIC-8_5.23x5.23mm_P1.27mmU4

More from Erhannis/EPC611_high_speed_camera

1
  • 2 layers42.5 × 32.5 mmEPC611 breakout, the printed circuit board in 3D

    EPC611 breakout

    Erhannis/EPC611_high_speed_camera

    Turn a $13 ToF 8x8 sensor into a 4000fps high speed camera.

    24 parts3

Similar boards

  • 4 layers20.3 × 99.1 mmProton, the printed circuit board in 3D

    Proton

    ewyrick-mark-1/Chromatone

    Chromatone is an embedded audio visualizer running on the Raspberry Pi RP2350. It samples audio through the ADC, performs a real-time FFT, detects musical notes, and drives an RGB LED output based on the results.

    119 parts1
  • 4 layers100 × 80 mmOptopi, the printed circuit board in 3D

    Optopi

    Erhannis/Optopi

    RP2040 board with 6 fiber optic tx/rx pairs (for e.g. uart)

    68 parts
  • 4 layers52.8 × 61.2 mmGameboyCartridgeV1.3, the printed circuit board in 3D

    GameboyCartridgeV1.3

    shilga/rp-gameboy-cartridge-hw

    You should order with ENIG (electroless nickel immersion gold) plating. While the cartridge will work with HASL you will getter contact with ENIG and it is less prone to wearing down.

    60 parts72CERN-OHL-P-2.0
  • 4 layers49.5 × 49.9 mmShifter, the printed circuit board in 3D

    Shifter

    janc18/CAE32

    Simracing equipment, including hardware, software, and firmware design.

    56 parts10GPL-3.0
  • 4 layers53.3 × 85.1 mmHUB75-FPGA Card, the printed circuit board in 3D

    HUB75-FPGA Card

    will-hut/Prototypical

    A USB FPGA-based Hub75 LED matrix driver

    132 parts2
  • 4 layers81.7 × 100.6 mmFinal Project PCB, the printed circuit board in 3D

    Final Project PCB

    ndesserich/ECE-36200-Final-Project-PCB

    A PCB that integrates an RP2350 and various peripherals to play games.

    80 parts1
  • 6 layers52.8 × 61.2 mmGameboyCartridgeV2.1, the printed circuit board in 3D

    GameboyCartridgeV2.1

    hazy2go/kagiboy

    A hardware wallet that lives in a Game Boy cartridge. Real ROM, Solana + EVM, every signature approved on the Game Boy's own screen.

    141 partsMIT
  • 4 layers50 × 50 mmMCU Board 0.2, the printed circuit board in 3D

    MCU Board 0.2

    thejamesrhodes/Hyades-Flight-Computer

    Full Hardware and Electronics design, Bare-metal GNC flight software for an actively attitude-controlled high-power rocket

    117 parts1Apache-2.0

Questions

How big is the Pico FT232H pair PCB?

It measures 65.4 × 66.8 mm and has 4 copper layers, 1.56 mm thick.

What parts does the Pico FT232H pair use?

62 parts, built around the RP2040, W25Q128JVSIQ, USBLC6-2P6 and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pico FT232H pair KiCad files?

From the Erhannis/EPC611_high_speed_camera repository on GitHub, at the commit this page was made from: the board is pcb/Pico_FT232H_pair/Pico_FT232H_pair.kicad_pcb and its schematic pcb/EPC611_breakout/EPC611_breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pico FT232H pair design in my own project?

Its repository states no licence, so its author keeps all rights: ask Erhannis before reusing the design.