
GameboyCartridgeV2.1
shilga/rp-gameboy-cartridge-hw
You should order with ENIG (electroless nickel immersion gold) plating. While the cartridge will work with HASL you will getter contact with ENIG and it is less prone to wearing down.

A hardware wallet that lives in a Game Boy cartridge. Real ROM, Solana + EVM, every signature approved on the Game Boy's own screen.
GameboyCartridgeV2.1 is an open-source printed circuit board by hazy2go, from the hazy2go/kagiboy repository on GitHub, published under the MIT licence. It is a 6-layer board of 52.8 × 61.2 mm with 141 parts on 179 nets, routed with 1,843 tracks and 528 vias.
It is built around the ESP32-C3-MINI-1U-N4, SN74LVC1G125DBVR-TP and SN74LVC3G34DCTR, with the TPS63802DLAR, W25Q128JVSIQ and AP2112K-3.3 among its other parts. Its parts include 51 capacitors, 47 resistors, 16 ICs, 12 diodes and 3 transistors. It belongs with the retro computing and games boards and the ESP32, RP2350 and RISC-V boards of this library.
Status (2026-10-15): 6-layer 0.8 mm, placed, routed and tidied, all checks green. Not ordered yet
(fab/ORDER.md). Overview, checks and history: ../README.md and ../LOGBOOK.md.
Based on the WiFi Game Boy Cartridge Rev B board, which
documents where its own design comes from. Hardware licence: CERN Open Hardware Licence v2 Permissive
(LICENSE-CERN-OHL-P.md), inherited from that design.
What's here:
GameboyCartridgeV2.1.kicad_*: the schematic (root, cpu, power, and radio, which holds the radio,
power stage and wallet parts) and the board.radio.kicad_sym, radio.pretty: project symbols and footprints, generated by tools/gen_radio_symbols.py,
tools/gen_radio_footprints.py, tools/gen_wallet_footprints.py. The added parts' sheet is generated from
../docs/design/netlist_radio.json by tools/gen_radio_sheet.py.fab/: JLC order files.art/: the back-silkscreen logo source.tools/: placement, routing, clean-up, audits and fab tools. Each is documented at the top of the file.Rules for changes:
../docs/design/netlist_radio.json and the tools, then run the checks in ../README.md.../LOGBOOK.md.| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100n | Capacitor_SMD:C_0402_1005Metric | C7, C9, C10, C11, C12, C13, C14, C15, C16, C17, C19 |
| 10 | 100nF 16V X7R | Capacitor_SMD:C_0402_1005Metric | C112, C113, C116, C117, C120, C122, C124, C125, C126, C127 |
| 6 | 1uF 25V X5R | Capacitor_SMD:C_0402_1005Metric | C101, C102, C103, C104, C118, C119 |
| 5 | 10k 1% | Resistor_SMD:R_0402_1005Metric | R108, R111, R112, R113, R114 |
| 5 | AOZ8809DI-05 | CrocoV2:TVS_AOZ8809DI-05 | D4, D5, D6, D7, D8 |
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C18, C20, C21 |
| 4 | 10uF 10V X5R | Capacitor_SMD:C_0603_1608Metric | C108, C109, C111, C128 |
| 4 | 1N4148WT | Diode_SMD:D_SOD-523 | D101, D102, D103, D104 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R14, R16 |
| 3 | 330uF 6.3V 40mOhm T520B337M006ATE040 | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B | C105, C106, C107 |
| 3 | 4.7k | Resistor_SMD:R_0402_1005Metric | R136, R137, R138 |
| 2 | 0R | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 100k 1% | Resistor_SMD:R_0402_1005Metric | R104, R115 |
| 2 | 15pF | Capacitor_SMD:C_0603_1608Metric | C4, C5 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R8, R13 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C25, C26 |
| 2 | 2.2k | Resistor_SMD:R_0402_1005Metric | R133, R134 |
| 2 | 2.2nF 50V X7R | Capacitor_SMD:C_0402_1005Metric | C114, C115 |
| 2 | 200k 1% | Resistor_SMD:R_0402_1005Metric | R117, R119 |
| 2 | 22R 1% | Resistor_SMD:R_0402_1005Metric | R120, R121 |
| 2 | 27R | Resistor_SMD:R_0603_1608Metric | R9, R10 |
| 2 | 4.7u | CrocoV2:C_0402_1005Metric_small_pads | C2, C3 |
| 2 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C6, C8 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | 680 1% | Resistor_SMD:R_0402_1005Metric | R128, R129 |
| 2 | 680k 1% | Resistor_SMD:R_0402_1005Metric | R116, R118 |
| 2 | D_Schottky | Diode_SMD:D_SOD-123F | D2, D3 |
| 1 | |||
| 1 | 0.47uH 5.5A 26mOhm DFE201612E-R47M | Inductor_SMD:L_Murata_DFE201610P | L101 |
| 1 | 1.0M 1% | Resistor_SMD:R_0402_1005Metric | R124 |
| 1 | 1.2M 1% | Resistor_SMD:R_0402_1005Metric | R125 |
| 1 | 1.3M 1% | Resistor_SMD:R_0402_1005Metric | R123 |
| 1 | 1.3k 1% | Resistor_SMD:R_0402_1005Metric | R101 |
| 1 | 10.0k 0.1% | Resistor_SMD:R_0402_1005Metric | R127 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R135 |
| 1 | 10nF 50V X7R | Capacitor_SMD:C_0402_1005Metric | C121 |
| 1 | 12MHz | Crystal:Crystal_SMD_TXC_7M-4Pin_3.2x2.5mm | Y1 |
| 1 | 12MHz 10pF 10ppm | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y101 |
| 1 | 180k 1% | Resistor_SMD:R_0402_1005Metric | R103 |
| 1 | 1k 1% | Resistor_SMD:R_0402_1005Metric | R132 |
| 1 | 22uF 6.3V X5R | Capacitor_SMD:C_0603_1608Metric | C110 |
| 1 | 27.0k 0.1% | Resistor_SMD:R_0402_1005Metric | R126 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q102 |
| 1 | 3.3u | CrocoV2:L_pol_2016 | L1 |
| 1 | 33 | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 330k 1% | Resistor_SMD:R_0402_1005Metric | R130 |
| 1 | 33R 1% | Resistor_SMD:R_0402_1005Metric | R122 |
| 1 | 470k 1% | Resistor_SMD:R_0402_1005Metric | R131 |
| 1 | 470pF 50V C0G | Capacitor_SMD:C_0402_1005Metric | C123 |
| 1 | 510 1% | Resistor_SMD:R_0402_1005Metric | R102 |
| 1 | 511k 1% | Resistor_SMD:R_0402_1005Metric | R109 |
| 1 | 91k 1% | Resistor_SMD:R_0402_1005Metric | R110 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | CH334P | Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.75x1.75mm | U107 |
| 1 | CJ2302 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | CartBus | CrocoV2:GameBoy_Cartridge_EdgeConnector | J5 |
| 1 | Conn_01x06 | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J4 |
| 1 | ESP32-C3-MINI-1U-N4 | radio:ESP32-C3-MINI-1U | U104 |
| 1 | LIS3DHTR | Package_LGA:LGA-16_3x3mm_P0.5mm_LayoutBorder3x5y | U111 |
| 1 | Polyfuse | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | RP2350_80QFN | CrocoV2:RP2350-QFN-80-1EP_10x10_P0.4mm_EP3.4x3.4mm_ThermalVias | U3 |
| 1 | SE050E2HQ1/Z01Z3Z | radio:NXP_HX2QFN-20-1EP_3x3mm_P0.4mm_EP1.9x1.9mm | U110 |
| 1 | SIA975DJ-T1-GE3 | Package_TO_SOT_SMD:Vishay_PowerPAK_SC70-6L_Dual | Q101 |
| 1 | SN74LVC1G125DBVR | Package_TO_SOT_SMD:SOT-23-5 | U105 |
| 1 | SN74LVC3G34DCTR | Package_SO:SSOP-8_2.95x2.8mm_P0.65mm | U106 |
| 1 | SW_Push | CrocoV2:GameBoy_soft_button | SW1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_PTS810 | SW2 |
| 1 | TLV3012BIDBVR | Package_TO_SOT_SMD:SOT-23-6 | U108 |
| 1 | TLV431BIDBZR | Package_TO_SOT_SMD:SOT-23 | U109 |
| 1 | TPS2116DRLR | Package_TO_SOT_SMD:SOT-583-8 | U101 |
| 1 | TPS2553DBVR | Package_TO_SOT_SMD:SOT-23-6 | U102 |
| 1 | TPS63802DLAR | radio:TI_DLA0010A_VSON-HR-10_2x3mm_P0.5mm | U103 |
| 1 | TXB0108PW | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U7 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U1 |
| 1 | USB_BOOT_SEL | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | W25Q128JVSIQ | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U2 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1 |

shilga/rp-gameboy-cartridge-hw
You should order with ENIG (electroless nickel immersion gold) plating. While the cartridge will work with HASL you will getter contact with ENIG and it is less prone to wearing down.

landjas09/Secure-Ready-Battery-Powered-Edge-Logger
Custom ESP32-C3 Secure-Ready Battery-Powered Edge Logger with environmental, light and acoustic sensing, local storage, DS3231 RTC, BQ27441 fuel gauging, SE050E2 secure element and TPS63802 buck-boost power.




DeadlySIn777/Controller
Unfinished CNC controller motherboard: native KiCad sources, rules, DSN and global routing review

earlynerd/ELRS-haptics
Battery-powered attitude feedback for FPV flying, with eight haptic actuators around each wrist. An ESP32-C6 receives telemetry over ESP-NOW and controls eight M2003FC1AE/DRV2625 pods using the music robot's UART ring…

It measures 52.8 × 61.2 mm and has 6 copper layers, 0.82 mm thick.
141 parts, built around the ESP32-C3-MINI-1U-N4, SN74LVC1G125DBVR-TP, SN74LVC3G34DCTR and TPS63802DLAR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hazy2go/kagiboy repository on GitHub, at the commit this page was made from: the board is hardware/cart/hw/wallet/GameboyCartridgeV2.1.kicad_pcb and its schematic hardware/cart/hw/wallet/GameboyCartridgeV2.1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).