
GameboyCartridgeV2.1
hazy2go/kagiboy
A hardware wallet that lives in a Game Boy cartridge. Real ROM, Solana + EVM, every signature approved on the Game Boy's own screen.

2-port CH334P USB Hub for VR headset
Bsb2evr hub is an open-source printed circuit board by plushugh, from the plushugh/bsb2evr_hub repository on GitHub. It is a 4-layer board of 10.6 × 26.8 mm with 28 parts on 30 nets, routed with 175 tracks and 26 vias.
It is built around the USBLC6-2P6, CH334P and TPS2553DBVR-1. Its parts include 9 capacitors, 6 ICs, 3 resistors, 3 connectors and 1 crystal.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100n | Capacitor_SMD:C_0402_1005Metric | C4, C10, C13 |
| 3 | 10u | Capacitor_SMD:C_0603_1608Metric | C8, C11, C12 |
| 3 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U2, U3, U4 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C6, C7 |
| 2 | 56k | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 1 | clipboard:3a555ad3-b456-4603-acc3-a7e53bc2ea9b | ||
| 1 | 12Mhz 10ppm | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 68k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | CH334P | lcsc_footprints:C5373042_QFN-16_L3_0-W3_0-P0_50-BL-EP1_7 | U1 |
| 1 | Downstream | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |
| 1 | Downstream (5V) | Connector_Molex:Molex_Pico-Clasp_202396-0407_1x04-1MP_P1.00mm_Horizontal | J2 |
| 1 | FAULT | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.5mm | TP4 |
| 1 | MCP1700x-330xxTT | Package_TO_SOT_SMD:SOT-23 | U6 |
| 1 | PORT2_D+ | TestPoint:TestPoint_Pad_D1.5mm | TP3 |
| 1 | PORT2_D- | TestPoint:TestPoint_Pad_D1.5mm | TP2 |
| 1 | TPS2553DBVR | lcsc_footprints:C55266_SOT-23-6_L2_9-W1_6-P0_95-LS2_8-BR | U5 |
| 1 | Upstream (Cable has CC) | Connector_Molex:Molex_Pico-Clasp_202396-0407_1x04-1MP_P1.00mm_Horizontal | J1 |
| 1 | VBUS_DS | TestPoint:TestPoint_Pad_D1.5mm | TP1 |

hazy2go/kagiboy
A hardware wallet that lives in a Game Boy cartridge. Real ROM, Solana + EVM, every signature approved on the Game Boy's own screen.





AndreaGiulianini/lira
57-key 40% + numpad keyboard: Bluetooth/USB-C, hot-swap MX, RMK/Vial, and a built-in USB sound card (3.5 mm headset jack). Generated from source with KiCad.


It measures 10.6 × 26.8 mm and has 4 copper layers, 1.62 mm thick.
28 parts, built around the USBLC6-2P6, CH334P and TPS2553DBVR-1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the plushugh/bsb2evr_hub repository on GitHub, at the commit this page was made from: the board is bsb2evr_hub.kicad_pcb and its schematic bsb2evr_hub.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask plushugh before reusing the design.