Skip to the content
12

BZT52C5V1

MDDExtended

1 Independent 130Ω 2uA 4.85V~5.36V 5.1V 500mW SOD-123 Zener Diodes ROHS

Part id
mdd/BZT52C5V1
Category
Zener Diodes
Package
SOD-123
Pins
2
In stock
550,530 at JLCPCB (C173407)
Used on
22 open-source boards

Overview

The BZT52C5V1 is a zener Diode made by MDD in a SOD-123 package with 2 pins. 1 Independent 130Ω 2uA 4.85V~5.36V 5.1V 500mW SOD-123 Zener Diodes ROHS.

PCBKit's library has its KiCad symbol (Device:D_Zener, from KiCad's library) and its footprint (Diode_SMD:D_SOD-123, from KiCad's library), ready for a KiCad board. 550,530 are in stock at JLCPCB (part C173407). 22 open-source boards in 20 repositories on GitHub use it.

Symbol

Device:D_ZenerFrom KiCad's library

Footprint

12
Diode_SMD:D_SOD-123From KiCad's library

From the datasheet

3
Forward voltage
900 mV · at IF = 10 mA, max · p. 1
Junction, hottest
150 °C · junction temperature, max · p. 1
Junction to air (SOD-123)
305 K/W · PCB mounted with 5 × 5 cm copper pads, typical · p. 1

Pinout

2
The pins of the BZT52C5V1
PinNameType
1KPassive
2APassive

Open-source boards using it

22See all 22
  • 4 layers138.2 × 200.4 mmHV servo drive v1, the printed circuit board in 3D

    HV servo drive v1

    ExcessiveMotion/drive-hardware

    383 parts175CERN-OHL-W-2.0
  • 2 layers25 × 32.5 mmNL FR8003A, the printed circuit board in 3D

    NL FR8003A

    nulllaborg/FR8003A_BLE5.1

    FR8003A BLE5.1 demo board

    27 parts4
  • 2 layers200 × 120 mmPlytka v2, the printed circuit board in 3D

    Plytka v2

    tmierzwa/WICI

    Otwarty system łączności awaryjnej (Reticulum/LXMF, 869 MHz)

    152 parts4
  • 2 layers101.6 × 50.8 mmLight switch, the printed circuit board in 3D

    Light switch

    NguyenThanhHuy-debug/PCB_Real-Time-Power-Monitoring-System-Development-Light-Switch

    PCBReal-Time-Power-Monitoring-System-Development-Light-Switch — a software project built with modern tooling.

    142 parts2
  • 2 layers100 × 100 mmSmart air, the printed circuit board in 3D

    Smart air

    meeTeam05/smart-air

    Devices provision over BLE, publish telemetry/shadow over MQTT, and serve the app through a Cloudflare-fronted Fastify API. See Features below for the full breakdown.

    70 parts1MIT
  • 2 layers75.2 × 83.6 mmShield, the printed circuit board in 3D

    Shield

    BlackJackMC/LineTracing

    25 parts
  • 2 layers99.4 × 99.3 mmIoT2526 HK2, the printed circuit board in 3D

    IoT2526 HK2

    Chethien1912/IoT-Environmental-Monitoring-System

    ESP32-based IoT environmental monitoring project semester 2 2025-2026 HCMUTE

    78 partsMIT
  • 4 layers64 × 64 mmFlight computer, the printed circuit board in 3D

    Flight computer

    daniel360kim/ember

    Thrust vector control rocket via differentiable simulation and reinforcement learning.

    96 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the BZT52C5V1?

Yes. The symbol is Device:D_Zener and the footprint Diode_SMD:D_SOD-123, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the BZT52C5V1?

SOD-123, with 2 pins. Its footprint is drawn on this page.

Where is the BZT52C5V1 datasheet?

MDD publishes it: the Datasheet link on this page opens it.

Where can I order the BZT52C5V1?

JLCPCB lists it as part C173407, with 550,530 in stock; the sellers' links on this page open their listings.

What can replace the BZT52C5V1?

Parts like it in the library: the MMSZ5231B by onsemi, the MM1Z5V1 by Shandong Jingdao Microelectronics, the BZT52C5V1 by Shikues and the MM1Z5B1 by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the BZT52C5V1?

22 boards in 20 repositories on GitHub; the most starred are listed on this page, with their KiCad files.