Skip to the content
2 layers175.5 × 99.3 mmMv2, the printed circuit board in 3D

This is a Macro-Keyboard Development

Size
175.5 × 99.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
61
Nets
58
Pads
252
Tracks, vias
646, 47
Pours
4
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
7 Jul 2022
Updated
6 Jul 2022

Overview

Mv2 is an open-source printed circuit board by nerdskp, from the nerdskp/F_your_Caps repository on GitHub. It is a 2-layer board of 175.5 × 99.3 mm with 61 parts on 58 nets, routed with 646 tracks and 47 vias.

It is built around the RP2040, W25Q128JVSIQ and MX1A-11NN, with the USBLC6-2SC6 among its other parts. Its parts include 19 capacitors, 13 ICs, 9 resistors, 3 connectors and 2 switches. It belongs with the keyboards and input boards and the RP2040 boards of this library.

Main components

4

README

README.md

Bobby-Pad is a 9 switches budget macro-keyboard with a great quality...

#PROJECT DETAILS -> 1. PCB :- the pcb is based of RP2040 , the pcb has the basic structure of any RP2040 PCB it contains a USB C recptable support , Along with it it contains a Rotary Encoder switch and a 2.3cm OLED. 2. FIRMWARE :- Since RP2040 doesen't support QMK so I am builduing a custom FIRMWARE with Rust(will update it soon) 3. CASE & PLATE :- For the Case and plate I am planning for alimunium to give it a weight , the design still under process

ROAD MAP ->

-> First commit the V1 with STM32 [ 05/22] { STM32 doesnt fit into the budget} -> Second change V2 with RP2040 [06/22] {Had issue with position and connections} -> Third change V3 with RP2040 [06/22] { 0 errors }

#My thoughts ->

  • I built the Version 1 without knowing much about its price but when I knew that I was shocked so I switched to RP2040 which was not that difficult to adapt as it has a good datasheet and guide provided in its official website , but this mcu is not much supported by the keyboard community still I feel comfortable to use this one . I ordered a Raberry Pi PICO for dry run and testing the firmware code before putting it to the PCBs (Might upload pics of it).

#BUDGET ->

  • PCB build + Bottom Assembly : 44$ FOR 5 PCB (i.e. Rs. 3,432)
  • SWITCHES (Cherry MX RGB blue) : 26$ FOR 50 switches (i.e. Rs.2,025)
  • Rotary encoder + oled : 8$ - 9$ per keeb :- total 40$ - 45$ for 5 keeb
  • Case & plate : --

#CURRENT TOTAL FOR EACH KEYBOARD (NO PLATE & CASE) : 24$ build cost #TO-DO -> [X] PCB design [x] PCB Test [ ] Firmware test/build [ ] Case and plate design [ ] Final test

  • All the pcb related files are uploaded

© 2022 GitHub, Inc. Terms Privacy Security Status Docs Contact GitHub Pricing API Training Blog About

Parts

61
QtyValueFootprintReferences
13, , , , , , , , , , , ,
12100nFCapacitor_SMD:C_0402_1005MetricC1, C2, C6, C7, C12, C13, C14, C15, C16, C17, C18, C19
9MX1A-11NNMX1A-11NN:CHERRY_MX1A-11NN_SWITCHU2, U3, U6, U8, U9, U10, U11, U12, U13
41uFCapacitor_SMD:C_0402_1005MetricC3, C4, C5, C11
31kResistor_SMD:R_0402_1005MetricR1, R6, R7
222pFCapacitor_SMD:C_0402_1005MetricC8, Ce
227RResistor_SMD:R_0603_1608MetricR4, R5
227kResistor_SMD:R_0402_1005MetricR2, R3
25k1Resistor_SMD:R_0402_1005MetricR8, R9
110uFCapacitor_SMD:C_0402_1005MetricC10
112MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
1500mAFuse:Fuse_1206_3216MetricF1
1Conn_01x04Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_VerticalJ2
1ENCODER-SWITCHRotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mmS1
1RP2040RP2040 (1):QFN40P700X700X90-57NU5
1SWDConnector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_VerticalJ1
1SW_PushConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalSW1
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U15
1USB_C_Receptacle_USB2.0Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J3
1W25Q128JVSPackage_SO:SOIC-8_5.23x5.23mm_P1.27mmU16
1XC6206PxxxMR-Regulator_LinearPackage_TO_SOT_SMD:SOT-23U14

Similar boards

  • 4 layers73.1 × 111.9 mmKeyBoard Fedevel, the printed circuit board in 3D

    KeyBoard Fedevel

    tuankoko567/KeyBoard-Board

    A fully custom 4 layers mechanical keyboard PCB based on the RP2040 microcontroller

    124 parts
  • 2 layers42 × 67 mmLalboard, the printed circuit board in 3D

    Lalboard

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    65 parts993
  • 2 layers307.7 × 89.2 mmChonky, the printed circuit board in 3D

    Chonky

    weteor/ChonkyKong

    60 key ortho keyboard with numpad and makro rows

    161 parts62CERN-OHL-P-2.0
  • 2 layers352.5 × 120 mmPyKey87, the printed circuit board in 3D

    PyKey87

    jpconstantineau/PyKey60

    The PyKey60 is a custom programmable mechanical keyboard with a standard ANSI 60% keyboard layout compatible with any cases made for the GH60. The PyKey60 uses mechanical switches (Cherry MX type).

    310 parts57
  • 4 layers141.9 × 131.1 mmRS64c, the printed circuit board in 3D

    RS64c

    lhm0/rotating_sphere

    Rotating LED Sphere - a POV display with RP2040

    145 parts46
  • 2 layers84.2 × 100 mmFabpack out v5 8, the printed circuit board in 3D

    Fabpack out v5 8

    yuz207/agentpad13

    agentpad13 — open-source 13-key macropad for agentic work (RP2040, vial-qmk, planar joystick, Raw HID agent-status protocol)

    126 parts41
  • 4 layers277.2 × 107.5 mmKatia, the printed circuit board in 3D

    Katia

    ikajdan/katia

    A split keyboard with 6 by 3 column staggered keys and 3 thumb keys, based on the Crkbrd design

    230 parts33CERN-OHL-P-2.0
  • 2 layers234.6 × 172.5 mmCombined, the printed circuit board in 3D

    Combined

    weteor/Kong

    48 key ortholinear keyboard

    260 parts27CERN-OHL-P-2.0

Questions

How big is the Mv2 PCB?

It measures 175.5 × 99.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Mv2 use?

61 parts, built around the RP2040, W25Q128JVSIQ, MX1A-11NN and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mv2 KiCad files?

From the nerdskp/F_your_Caps repository on GitHub, at the commit this page was made from: the board is mv2.kicad_pcb and its schematic mv2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mv2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask nerdskp before reusing the design.