

Chonky
60 key ortho keyboard with numpad and makro rows
- Size
- 307.7 × 89.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 161
- Nets
- 117
- Pads
- 791
- Tracks, vias
- 752, 141
- Pours
- 37
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 5 Apr 2023
- Updated
- 5 Apr 2023
Overview
Chonky is an open-source printed circuit board by weteor, from the weteor/ChonkyKong repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 307.7 × 89.2 mm with 161 parts on 117 nets, routed with 752 tracks and 141 vias.
It is built around the RP2040, W25Q128JVSIQ and USBLC6-2SC6. Its parts include 72 switches, 60 diodes, 14 capacitors, 8 resistors and 4 ICs. It belongs with the keyboards and input boards and the RP2040 boards of this library.
Main components
3RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
README
README.mdKong
48 key orthogonal keyboard with offset bottom row

Features
-
Hotswap sockets
-
onboard rp2040
-
production files for pcba
-
case files are supplied (stl, dxf, as well as the freecad files)
-
QMK with vial support
-
completely open source, permissive license (CERN-OHL-P)
-
bottom rows supported:
- alpha thumbs
- 1u 1u 1u
- 2u 1u
- 3u
- numpad thumbs
- 1u 1u 1u
- 2u 1u
- 1u 2u
- makro cols
- 1u 1u 1u 1u
- 2u 1u 1u
- 1u 1u 2u
- 1u 2u 1u
- 2u 2u
- alpha thumbs
Want one?
All production files you need to build your own board can be found here: pcb / case.
Parts needed beside the assembled pcbs:
-
up to 60 hotswap sockets ( mx or choc)
-
up to 60 of your favourite switches (mx or choc)
-
8 m2 heat inserts
-
8 m2 screws
firmware
The first time the pcb is plugged in, the bootloader will provide a drive to upload the firmware file. You may either build the firmware yourself or use the provided vial firmware files here. You may use VIAL (download to program your board after that, without need to build a new firmware.
the rest
Everything in this repository is free to use however you might see fit. If you want to support me and my projects, please consider linking back to this repository if you build/change/use anything.
If you would like to send me a tip, you could do it here (Please don't feel like you have to).
Parts
161| Qty | Value | Footprint | References |
|---|---|---|---|
| 60 | D | weteor:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +44 |
| 60 | SW_Push | weteor:CherryMX_Hotswap | SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW19, SW20, SW21, SW22, SW23, SW24, SW25 +44 |
| 8 | 100nF | Capacitor_SMD:C_0402_1005Metric | C3, C4, C5, C8, C9, C10, C11, C14 |
| 6 | SW_Push | weteor:CherryMX_Hotswap_2u_vert | SW67, SW68, SW69, SW70, SW71, SW72 |
| 4 | 1uF | Capacitor_SMD:C_0402_1005Metric | C6, C7, C12, C13 |
| 4 | SW_Push | weteor:CherryMX_Hotswap_2u_stabs | SW18, SW31, SW40, SW54 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R2, R5 |
| 2 | 27R | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 27pF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | SW_Push | weteor:Micro_Push_Button_3x6x2.5mm | SW1, SW41 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | BL_CONN | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Crystal_GND24_Small | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | RP2040 | RP2040_minimal:RP2040-QFN-56 | U1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | USB_C_Receptacle_USB2.0 | weteor:USB C-31-M-12 | J2 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U3 |
| 1 | XC6206PxxxMR | Package_TO_SOT_SMD:SOT-23-3 | U2 |
Similar boards
- 2 layers42 × 67 mm

- 2 layers352.5 × 120 mm

PyKey87
jpconstantineau/PyKey60
The PyKey60 is a custom programmable mechanical keyboard with a standard ANSI 60% keyboard layout compatible with any cases made for the GH60. The PyKey60 uses mechanical switches (Cherry MX type).
310 parts57 - 4 layers141.9 × 131.1 mm

- 2 layers84.2 × 100 mm

Fabpack out v5 8
yuz207/agentpad13
agentpad13 — open-source 13-key macropad for agentic work (RP2040, vial-qmk, planar joystick, Raw HID agent-status protocol)
126 parts41 - 4 layers277.2 × 107.5 mm

Katia
ikajdan/katia
A split keyboard with 6 by 3 column staggered keys and 3 thumb keys, based on the Crkbrd design
230 parts33CERN-OHL-P-2.0 - 2 layers234.6 × 172.5 mm

- 4 layers93.5 × 118.6 mm

RD56
lhm0/rotating_display_color
56 LED rotating color display with RP2040 and ESP32 microcontrollers
266 parts25 - 2 layers288.8 × 160.1 mm

GRAM SLIM
GRAMCTRL/GRAM-SLIM
Open source low-profile leverless design with an integrated RP2040.
64 parts24GPL-3.0
Questions
How big is the Chonky PCB?
It measures 307.7 × 89.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Chonky use?
161 parts, built around the RP2040, W25Q128JVSIQ and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Chonky KiCad files?
From the weteor/ChonkyKong repository on GitHub, at the commit this page was made from: the board is pcb/chonky.kicad_pcb and its schematic pcb/chonky.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Chonky design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).