Skip to the content

STM32

736 boards

KiCad boards from 367 GitHub repositories tagged “stm32”, the most starred first; open any of them in PCBKit.

  • 2 layers57 × 91.5 mmSTM32G071, the printed circuit board in 3D

    STM32G071

    TechnikWeber/STM32G071CBT6-ILI9341

    Custom STM32G071 board with an ILI9341 display and demo firmware.

    25 partsMIT
  • 2 layers80 × 60.5 mmSTM32H7 Control Board, the printed circuit board in 3D

    STM32H7 Control Board

    tejaswininagalingam/STM32H7

    Design a high-performance embedded real-time control board based on an STM32H7 microcontroller, suitable for high-frequency control loops, deterministic outputs, precision sensing, and high-rate data logging.

    14 parts
  • 4 layers100 × 142.5 mmKeeb4x4, the printed circuit board in 3D

    Keeb4x4

    TheRealBluesun/keeb4x4

    4x4 macropad: STM32G431, per-key RGB, ScreenKey display keycaps, encoder. KiCad + Rust/Embassy firmware, USB bootloader, host CLI, printable base.

    127 partsCERN-OHL-P-2.0
  • 2 layers333.8 × 162.2 mmSreeram keyboard, the printed circuit board in 3D

    Sreeram keyboard

    theRealMantaflow/custom_mechanical_keyboard

    Mechanical Keyboard using STM32F405RGT

    216 partsGPL-3.0
  • 4 layers118.2 × 93.2 mmBMS, the printed circuit board in 3D

    BMS

    Vincent-Cauquil/5A-Projet-Parking

    PSM Major Project: A modular smart parking system combining AI (ANPR/OCR), real-time control (Zephyr/STM32), and FPGA-based motor management (LiteX RISC-V SoC), all coordinated via MQTT for seamless access control and…

    376 parts
  • 2 layers117.8 × 72.3 mmTelematics device PCB, the printed circuit board in 3D

    Telematics device PCB

    Yadnik1/Low-Cost-Telematics-Device

    Developed a cost-effective telematics device for automobiles, capable of enabling user-based insurance models to save up to 30% on premiums.

    21 parts
  • 2 layers180 × 180 mmPhyllo copper review, the printed circuit board in 3D

    Phyllo copper review

    yangwei251003/phyllotaxis

    PHYLLO叶序灯:F411固件、网页演示与可公开硬件设计,实板尚未验证。

    171 partsMIT
  • 4 layers68.8 × 53.6 mmEasyduino Atmega, the printed circuit board in 3D

    Easyduino Atmega

    Hanqaqa/Easyduino

    Easily dive into different PCB KiCad designs of the most popular microcontroller devboards

    38 parts755CERN-OHL-P-2.0
  • 4 layers43.4 × 18 mmEasyduino Atmega Nano, the printed circuit board in 3D

    Easyduino Atmega Nano

    Hanqaqa/Easyduino

    Easily dive into different PCB KiCad designs of the most popular microcontroller devboards

    31 parts755CERN-OHL-P-2.0
  • 4 layers28.4 × 47.9 mmEasyduino ESP32, the printed circuit board in 3D

    Easyduino ESP32

    Hanqaqa/Easyduino

    Easily dive into different PCB KiCad designs of the most popular microcontroller devboards

    29 parts755CERN-OHL-P-2.0
  • 4 layers25.9 × 63.9 mmEasyduino ESP32S3, the printed circuit board in 3D

    Easyduino ESP32S3

    Hanqaqa/Easyduino

    Easily dive into different PCB KiCad designs of the most popular microcontroller devboards

    35 parts755CERN-OHL-P-2.0
  • 4 layers23 × 53 mmEasyduino STM32F103, the printed circuit board in 3D

    Easyduino STM32F103

    Hanqaqa/Easyduino

    Easily dive into different PCB KiCad designs of the most popular microcontroller devboards

    30 parts755CERN-OHL-P-2.0
  • 2 layersAlpha.9mm.wire, the printed circuit board in 3D

    Alpha.9mm.wire

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    2 parts410
  • 2 layers25 × 19 mmAudio in daisy, the printed circuit board in 3D

    Audio in daisy

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    13 parts410
  • 2 layers25 × 19 mmAudio out daisy, the printed circuit board in 3D

    Audio out daisy

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    13 parts410
  • 2 layers59.6 × 109.5 mmCustom, the printed circuit board in 3D

    Custom

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    14 parts410
  • 2 layersBourns.pec11rn.wire, the printed circuit board in 3D

    Bourns.pec11rn.wire

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    3 parts410
  • 2 layersBourns.pec11rs.wire, the printed circuit board in 3D

    Bourns.pec11rs.wire

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    4 parts410
  • 2 layers10 × 19 mmButton, the printed circuit board in 3D

    Button

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    3 parts410
  • 2 layersCk.d6r.black.wire, the printed circuit board in 3D

    Ck.d6r.black.wire

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    2 parts410
  • 2 layers59.6 × 109.5 mmCustom, the printed circuit board in 3D

    Custom

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    17 parts410
  • 2 layers25 × 19 mmCv in, the printed circuit board in 3D

    Cv in

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    13 parts410
  • 2 layersDailywell.2ms1.wire, the printed circuit board in 3D

    Dailywell.2ms1.wire

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    3 parts410
  • 2 layers59.6 × 109.5 mmDrop, the printed circuit board in 3D

    Drop

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    40 parts410