Skip to the content

Retrocomputing

223 boards

KiCad boards from 113 GitHub repositories tagged “retrocomputing”, the most starred first; open any of them in PCBKit.

  • 2 layers53.3 × 76.2 mmPAS16DB, the printed circuit board in 3D

    PAS16DB

    demik/oldworld

    Development ressources for Old World Macintosh (68k and NuBus PPC) and a few related things…

    58 parts27CERN-OHL-P-2.0
  • 2 layers25 × 35 mmPB5xx ATXCPU, the printed circuit board in 3D

    PB5xx ATXCPU

    demik/oldworld

    Development ressources for Old World Macintosh (68k and NuBus PPC) and a few related things…

    7 parts27CERN-OHL-P-2.0
  • 2 layers20 × 60 mmPB5xx Floppy, the printed circuit board in 3D

    PB5xx Floppy

    demik/oldworld

    Development ressources for Old World Macintosh (68k and NuBus PPC) and a few related things…

    5 parts27CERN-OHL-P-2.0
  • 2 layers77.5 × 25.4 mmVIA PLCC2DIP, the printed circuit board in 3D

    VIA PLCC2DIP

    demik/oldworld

    Development ressources for Old World Macintosh (68k and NuBus PPC) and a few related things…

    6 parts27CERN-OHL-P-2.0
  • 4 layers77.5 × 44.7 mmVIA Plus, the printed circuit board in 3D

    VIA Plus

    demik/oldworld

    Development ressources for Old World Macintosh (68k and NuBus PPC) and a few related things…

    20 parts27CERN-OHL-P-2.0
  • 2 layers99.7 × 78.7 mmApple II Prototype, the printed circuit board in 3D

    Apple II Prototype

    tebl/Apple2-Prototyping-Card

    Prototyping card for developing new hardware for legacy Apple ][, //e and //gs computers.

    40 parts23
  • 2 layers76.2 × 73.7 mmRetroZ disk, the printed circuit board in 3D

    RetroZ disk

    formix/RetroZ

    An S80 Single Board Retro Computer

    22 parts22Apache-2.0
  • 2 layersMacSnap SCSI original, the printed circuit board in 3D

    MacSnap SCSI original

    demik/MacSnap-SCSI

    SCSI interface by Dove Computer Corporation for Macintosh 512Ke

    29 parts20CERN-OHL-P-2.0
  • 2 layers299.3 × 94.3 mmExtender 36pin, the printed circuit board in 3D

    Extender 36pin

    MattisLind/DP2200

    Datapoint 2200

    38 parts19Apache-2.0
  • 2 layers119.1 × 234.2 mmExtender 44pin, the printed circuit board in 3D

    Extender 44pin

    MattisLind/DP2200

    Datapoint 2200

    46 parts19Apache-2.0
  • 2 layers64.1 × 99.4 mm1551-rePico, the printed circuit board in 3D

    1551-rePico

    ytmytm/1551-rePico

    Commodore 1551 disk-drive replacement for Plus/4, C16 and C116: Pico2 + 6510T + CPLD in a Pi1551-III case, host via tcbm2sd. Firmware/GCR derived from 1541-rePico.

    41 parts16GPL-3.0
  • 2 layers39.4 × 86.4 mmA500r5 eprom adapter, the printed circuit board in 3D

    A500r5 eprom adapter

    hkzlab/A500_r5-eprom_adapter

    Amiga 500 rev.5 EPROM adapter for 27C020, 27C040 and 27C080

    12 parts15
  • 6 layers290.7 × 322 mmBoard routed golden, the printed circuit board in 3D

    Board routed golden

    epatel/discrete6502

    A MOS 6502 CPU rebuilt from 4,051 discrete transistors on a 291x322mm six-layer board that reproduces the original die layout

    5,425 parts14
  • 2 layers29.2 × 67.3 mmAdapter, the printed circuit board in 3D

    Adapter

    dabridgham/QSIC-verilog

    QBUS Storage and I/O Card

    9 parts11
  • 2 layers133.1 × 77.2 mmIndicator panel, the printed circuit board in 3D

    Indicator panel

    dabridgham/QSIC-verilog

    QBUS Storage and I/O Card

    84 parts11
  • 4 layers214.1 × 131.7 mmProto, the printed circuit board in 3D

    Proto

    dabridgham/QSIC-verilog

    QBUS Storage and I/O Card

    76 parts11
  • 4 layers214.1 × 131.7 mmQsic, the printed circuit board in 3D

    Qsic

    dabridgham/QSIC-verilog

    QBUS Storage and I/O Card

    186 parts11
  • 2 layers39.4 × 57.2 mmPod 27C040, the printed circuit board in 3D

    Pod 27C040

    hkzlab/ROsiM

    ROsiM is a ROM simulator/emulator, supporting up to 512k/16bit ROMs

    13 parts11GPL-3.0
  • 2 layers17.8 × 35.6 mmSocket 27C16, the printed circuit board in 3D

    Socket 27C16

    hkzlab/ROsiM

    ROsiM is a ROM simulator/emulator, supporting up to 512k/16bit ROMs

    2 parts11GPL-3.0
  • 2 layers17.8 × 40.6 mmSocket 27C020, the printed circuit board in 3D

    Socket 27C020

    hkzlab/ROsiM

    ROsiM is a ROM simulator/emulator, supporting up to 512k/16bit ROMs

    2 parts11GPL-3.0
  • 2 layers17.8 × 35.6 mmSocket 27C32, the printed circuit board in 3D

    Socket 27C32

    hkzlab/ROsiM

    ROsiM is a ROM simulator/emulator, supporting up to 512k/16bit ROMs

    2 parts11GPL-3.0
  • 2 layers17.8 × 40.6 mmSocket 27C040, the printed circuit board in 3D

    Socket 27C040

    hkzlab/ROsiM

    ROsiM is a ROM simulator/emulator, supporting up to 512k/16bit ROMs

    2 parts11GPL-3.0