Skip to the content

PCB design

1,387 boards

KiCad boards from 598 GitHub repositories tagged “pcb-design”, the most starred first; open any of them in PCBKit.

  • 2 layers65 × 56 mmRaccoon hat, the printed circuit board in 3D

    Raccoon hat

    BenjiTrapp/TrashPandaPaws

    Red Team hardware implant — RPi4/CM4 inline Ethernet tap with PoE, cover identities (Cisco Phone / HP Printer), 802.1X NAC bypass, a stdlib-only Python beacon over HTTPS/DNS/SMB/QUIC, and an operator GUI with an…

    45 parts5
  • 2 layers18.8 × 21.3 mmDRV BREAKOUT BOARD, the printed circuit board in 3D

    DRV BREAKOUT BOARD

    bismarx-v1/Sumec-MiniSumo

    OLD REPO, FOR NEW UPDATES VISIT: https://github.com/bismarx-v1/Sumec-MiniSumo-master

    3 parts5
  • 2 layers90 × 11 mmQRE MiniBoards, the printed circuit board in 3D

    QRE MiniBoards

    bismarx-v1/Sumec-MiniSumo

    OLD REPO, FOR NEW UPDATES VISIT: https://github.com/bismarx-v1/Sumec-MiniSumo-master

    9 parts5
  • 2 layers40 × 59.8 mmRC-5 Remote Controler, the printed circuit board in 3D

    RC-5 Remote Controler

    bismarx-v1/Sumec-MiniSumo

    OLD REPO, FOR NEW UPDATES VISIT: https://github.com/bismarx-v1/Sumec-MiniSumo-master

    11 parts5
  • 2 layers18.5 × 13 mmSTART MODULE, the printed circuit board in 3D

    START MODULE

    bismarx-v1/Sumec-MiniSumo

    OLD REPO, FOR NEW UPDATES VISIT: https://github.com/bismarx-v1/Sumec-MiniSumo-master

    12 parts5
  • 2 layers44 × 36 mmAstable Multivibrator, the printed circuit board in 3D

    Astable Multivibrator

    macmade/Electronics-Tutorials

    Various electronics test projects.

    13 parts5
  • 2 layers66 × 37 mmSR Latch, the printed circuit board in 3D

    SR Latch

    macmade/Electronics-Tutorials

    Various electronics test projects.

    21 parts5
  • 2 layers38 × 65 mmRauchmelder 3.6, the printed circuit board in 3D

    Rauchmelder 3.6

    selfbus/hardware-merged

    Hardware for KNX devices

    59 parts5
  • 2 layers102.1 × 53.9 mmProject Hanip, the printed circuit board in 3D

    Project Hanip

    AhmadHaniF1145/Projek-Mikrokontroller-Sensor-Gas

    Sistem pendeteksi kebocoran gas adalah sistem elektronik yang dirancang untuk mendeteksi dan memberi peringatan tentang kebocoran gas.

    25 parts4
  • 4 layers75 × 60 mmP1 rx, the printed circuit board in 3D

    P1 rx

    Deco025/resonare

    Resonare: open-source 120 W LCC-S resonant wireless charger, transmitter and receiver boards (KiCad 10, 4-layer)

    90 parts4CERN-OHL-S-2.0
  • 2 layers30 × 65 mmUsb hat, the printed circuit board in 3D

    Usb hat

    marchmare/snaphat-pcb

    RaspberryPi Zero 2 W addon serving as a handheld photo camera setup

    15 parts4Apache-2.0
  • 4 layers130 × 146 mmBoard a routed pass1 fixed, the printed circuit board in 3D

    Board a routed pass1 fixed

    ajisrawi/passive-radar-counter-drone

    Passive radar for counter-drone using DVB-T, 4G and 5G: simulation, receiver hardware, FPGA micro-Doppler firmware, antennas, enclosure

    194 parts3
  • 8 layers150 × 105 mmBoard b routed before 1022 1729, the printed circuit board in 3D

    Board b routed before 1022 1729

    ajisrawi/passive-radar-counter-drone

    Passive radar for counter-drone using DVB-T, 4G and 5G: simulation, receiver hardware, FPGA micro-Doppler firmware, antennas, enclosure

    228 parts3
  • 2 layers85 × 85 mmOBC v1, the printed circuit board in 3D

    OBC v1

    Migsster/StormSat-CubeSat

    1U CubeSat avionics prototype with custom OBC/EPS/Payload PCBs, STM32 embedded firmware, LoRa TT&C, GNSS and Python mission analysis.

    11 parts3
  • 2 layers85 × 85 mmPayload, the printed circuit board in 3D

    Payload

    Migsster/StormSat-CubeSat

    1U CubeSat avionics prototype with custom OBC/EPS/Payload PCBs, STM32 embedded firmware, LoRa TT&C, GNSS and Python mission analysis.

    13 parts3
  • 2 layers22 × 20 mm3117 breakout, the printed circuit board in 3D

    3117 breakout

    r4hulrr/ausign

    Real-time Auslan (Australian Sign Language) to English speech translation glove. Built with ESP32-S3, flex sensors, IMU on a custom PCB, and a Bluetooth-connected Python GUI.

    19 parts3MIT
  • 2 layers48 × 48 mmELEC3117 Template, the printed circuit board in 3D

    ELEC3117 Template

    r4hulrr/ausign

    Real-time Auslan (Australian Sign Language) to English speech translation glove. Built with ESP32-S3, flex sensors, IMU on a custom PCB, and a Bluetooth-connected Python GUI.

    16 parts3MIT
  • 4 layers66.5 × 47 mmFlight controller, the printed circuit board in 3D

    Flight controller

    shazmeenShz/ESP32-Flight-Controller

    Custom 4-layer IoT-Ready ESP32 Flight Controller PCB designed in KiCad 8 featuring USB Type-C, CH340C, MP1584 power management, MPU6050 interface, and manufacturing-ready Gerber files.

    48 parts3MIT
  • 2 layers23.1 × 23.6 mm555 astable, the printed circuit board in 3D

    555 astable

    ApophisXIV/PCB-Desing

    Some hardware stuff

    11 parts2
  • 2 layers39.9 × 32.6 mm555 astable THT, the printed circuit board in 3D

    555 astable THT

    ApophisXIV/PCB-Desing

    Some hardware stuff

    12 parts2
  • 2 layers50 × 50 mmKeypad w leds, the printed circuit board in 3D

    Keypad w leds

    ApophisXIV/PCB-Desing

    Some hardware stuff

    47 parts2
  • 2 layers44.8 × 38.5 mmMic preamplifier, the printed circuit board in 3D

    Mic preamplifier

    ApophisXIV/PCB-Desing

    Some hardware stuff

    16 parts2