Mlab

56 boards

KiCad boards from 56 GitHub repositories tagged “mlab”, the most starred first; open any of them in PCBKit.

2 layers40.1 × 19.8 mm
TTLLVDS01
mlab-modules/TTLLVDS01
TTL to LVDS translating module.
17 parts1GPL-3.0
2 layers60.5 × 49.7 mm
4XLTO1865V01A
mlab-modules/4XLTO1865V01
4x LTO cells holder
10 partsGPL-3.0
2 layers30 × 40.1 mm
ACOMP01
mlab-modules/ACOMP01
Fast analog comparator module
20 partsGPL-3.0
2 layers40.1 × 40.1 mm
AMUX01
mlab-modules/AMUX01
Four-channel analog multiplexer with single-sided output
20 partsGPL-3.0
2 layers40.1 × 40.1 mm
BATPOWER04
mlab-modules/BATPOWER04
High-efficiency step-down converter based on the LM3485 PFET buck controller. Input voltage range is 4.5 V to 16 V.
31 parts
2 layers60.5 × 40.1 mm
BP02
mlab-modules/BP02
Symmetrical RF filter module with SATA connector input/output
38 partsGPL-3.0
2 layers40.1 × 40.1 mm
BRIDGEADC01
mlab-modules/BRIDGEADC01
Strain Gauges analog front end and ADC
44 partsGPL-3.0
2 layers19.8 × 40.1 mm
CLKGEN02
mlab-modules/CLKGEN02
The module comprises a plurality of housings for mounting a variety of crystal oscillators.
21 parts
2 layers101.1 × 60.5 mm
DATALOGGER02
mlab-modules/DATALOGGER02
Arduino based data logger with LoRa IoT interface.
161 partsGPL-3.0
2 layers30 × 40.1 mm
DRV8835HB01B
mlab-modules/DRV8835HB01
Control two DC motors with DRV8835HB H-bridge ICs up to 2x1.5A @ 11 V
25 parts
2 layers40.5 × 59.9 mm
GLCD01
mlab-modules/GLCD01
MLAB module for the TN0181ANVNANN-GN00 square MIP (Memory-in-Pixel) LCD display. Communicates over 3-wire SPI (SCLK, SI, SCS). Includes an onboard MIC1557 RC oscillator for VCOM generation — no external signal required.
19 partsGPL-3.0
2 layers30 × 40.1 mm
I2C232V01
mlab-modules/I2C232V01
The base module is an integrated circuit SC18IM700, who works as a converter I2C / UART. I2C interface acts as the master. I2C can be used to speed 400kbit / Sau UART can be up to 460.8 kbit / s.
31 parts
2 layers30 × 40.1 mm
I2CADC01
mlab-modules/I2CADC01
24-bit analog to digital converter with I2C interface
33 parts
2 layers40.1 × 40.1 mm
I2CIO01
mlab-modules/I2CIO01
GPIO expander with I²C interface; 16-bit I/O, configurable ports, polarity inversion.
38 parts
2 layers30 × 40.1 mm
I2CSPI01
mlab-modules/I2CSPI01
Allows connection of SPI devices to I2C bus and is capable co handle up to four SPI slaves. Not used chip-select pins can be used as GPIO pins.
22 parts
2 layers
LION1CELL02
mlab-modules/LION1CELL02
Single-cell Li-Ion Battery management system with I2C interface
93 partsGPL-3.0
2 layers101.1 × 101.1 mm
MPPB01
mlab-modules/MPPB01
Mechanical parallella peripheral board
27 partsGPL-3.0
2 layers60.8 × 70.9 mm
OLED01
mlab-modules/OLED01
OLED module with SSD1306 controller, I2C interface level shifter, integrated buzzer, touchscreen, and LEDs.
54 partsGPL-3.0
2 layers80.8 × 40.1 mm
PCRD03
mlab-modules/PCRD03
Silicon PIN diode cosmic radiation detector
165 partsGPL-3.0
2 layers60.5 × 40.1 mm
PCRD05
mlab-modules/PCRD05
Silicon photomultiplier based radiation detector
57 partsGPL-3.0
2 layers30 × 40.1 mm
REL1SW01
mlab-modules/REL1SW01
Dual MOSFET or single Relay switching module.
22 parts
2 layers40.1 × 60.5 mm
RFIQINT02B
mlab-modules/RFIQINT02
UTP cable RF signal I/Q interface for QFHMIX module with RJ45 connectors
46 partsGPL-3.0
2 layers40.1 × 40.1 mm
RFSWITCH01
mlab-modules/RFSWITCH01
The module featuring two RF switches. Designed for radio transceivers with separate input and output.
45 partsGPL-3.0
2 layers40.1 × 30 mm
SATABAL01
mlab-modules/SATABAL01
RF balun with unballanced MCX/SMA and balanced SATA connectors
9 partsGPL-3.0