MIDI

142 boards

KiCad boards from 59 GitHub repositories tagged “midi”, the most starred first; open any of them in PCBKit.

2 layers41.4 × 47.3 mm
MIDI Breakout Board
tebl/BulkyMIDI-32
A HW build of the MT32-PI project, allowing you to emulate a Roland MT-32 using a Raspberry Pi. Includes enough additional modules to build a MIDI-mountain as well as adapters for connecting to most things retro.
15 parts80CC-BY-SA-4.0
2 layers19.1 × 23.2 mm
Vertical Rotary Encoder
tebl/BulkyMIDI-32
A HW build of the MT32-PI project, allowing you to emulate a Roland MT-32 using a Raspberry Pi. Includes enough additional modules to build a MIDI-mountain as well as adapters for connecting to most things retro.
4 parts80CC-BY-SA-4.0
2 layers17 × 96.2 mm
Minisynth32-front
grantek/minisynth32
A 3D-printable MIDI synthesiser inspired by the Roland MT-32 and clumsyMIDI, and powered by the mt32-pi MT-32 emulator.
15 parts45CC-BY-SA-4.0
2 layers31.8 × 96 mm
Minisynth32-rear
grantek/minisynth32
A 3D-printable MIDI synthesiser inspired by the Roland MT-32 and clumsyMIDI, and powered by the mt32-pi MT-32 emulator.
15 parts45CC-BY-SA-4.0
2 layers98 × 54.4 mm
Control board prototype
Windfisch/analog-synth
A low-cost semimodular analog synthesizer
77 parts31GPL-3.0
2 layers
Libtest
Windfisch/analog-synth
A low-cost semimodular analog synthesizer
2 parts31GPL-3.0
2 layers50 × 80 mm
Vco mk1
Windfisch/analog-synth
A low-cost semimodular analog synthesizer
90 parts31GPL-3.0
2 layers481.8 × 143.2 mm
Vco mk1 old
Windfisch/analog-synth
A low-cost semimodular analog synthesizer
71 parts31GPL-3.0
2 layers56 × 110 mm
Din5 pcb
Windfisch/midikraken
A open source, open hardware up-to-16x USB-MIDI-interface for around 15 bucks in its smallest configuration.
82 parts28
2 layers50.8 × 101.6 mm
Perfboard
Windfisch/midikraken
A open source, open hardware up-to-16x USB-MIDI-interface for around 15 bucks in its smallest configuration.
49 parts28
2 layers100.3 × 57.2 mm
Xfaders
essigt/SpareFaders
A (still work in progress) STM32-BluePill based MA-Style midi controller featuring 60 buttons and 15 faders.
32 parts12
4 layers111.8 × 165.1 mm
Modulation board
JordanAceto/micro_ox
Monosynth with analog signal path and digital controls. SSI2130 VCOs and SSI2140 VCF.
244 parts8CC-BY-4.0
2 layers203.2 × 76.2 mm
Power supply and io board
JordanAceto/micro_ox
Monosynth with analog signal path and digital controls. SSI2130 VCOs and SSI2140 VCF.
45 parts8CC-BY-4.0
2 layers60.3 × 165.1 mm
VCF VCA board
JordanAceto/micro_ox
Monosynth with analog signal path and digital controls. SSI2130 VCOs and SSI2140 VCF.
138 parts8CC-BY-4.0
2 layers99.1 × 49.5 mm
Vs1053-waveblaster
ivop/vs1053-waveblaster
New WaveBlaster Daughterboard based on the VS1053 chip
35 parts7
4 layers45.5 × 71.5 mm
Dinoctopus v2
bjonnh/dinoctopus
A MIDI router and USB interface using a Raspberry PICO (RP2040)
63 parts6MIT
2 layers64 × 44 mm
Dinoctopus
bjonnh/dinoctopus
A MIDI router and USB interface using a Raspberry PICO (RP2040)
27 parts6MIT
2 layers80 × 33 mm
Midi rx board
bjonnh/dinoctopus
A MIDI router and USB interface using a Raspberry PICO (RP2040)
33 parts6MIT
2 layers80 × 25 mm
Midi tx board
bjonnh/dinoctopus
A MIDI router and USB interface using a Raspberry PICO (RP2040)
21 parts6MIT
2 layers28.5 × 21.5 mm
Minimidi v1
bjonnh/dinoctopus
A MIDI router and USB interface using a Raspberry PICO (RP2040)
18 parts6MIT
2 layers81.8 × 110 mm
V05 routed single
bjonnh/dinoctopus
A MIDI router and USB interface using a Raspberry PICO (RP2040)
58 parts6MIT
2 layers20.3 × 62 mm
MIDI IN
TuDo-Makerspace/MIDI-Breakouts
Just another pair of MIDI breakouts
13 parts6
2 layers14 × 16.2 mm
Anthracite footswitch
trope-oshw/anthracite
MIDI-controllable fuzz pedal: open hardware (CERN-OHL-S-2.0), firmware (GPL-3.0-or-later)
2 parts5CERN-OHL-S-2.0
4 layers60 × 102 mm
Anthracite top
trope-oshw/anthracite
MIDI-controllable fuzz pedal: open hardware (CERN-OHL-S-2.0), firmware (GPL-3.0-or-later)
222 parts5CERN-OHL-S-2.0