Skip to the content

IoT

408 boards

KiCad boards from 252 GitHub repositories tagged “iot”, the most starred first; open any of them in PCBKit.

  • 2 layers78 × 20 mmRelay expansion, the printed circuit board in 3D

    Relay expansion

    enriquewph/esp-map

    Modular hardware for IoT & home automation

    17 parts4MIT
  • 2 layers100 × 70 mmUPSMonitorModule, the printed circuit board in 3D

    UPSMonitorModule

    enriquewph/esp-map

    Modular hardware for IoT & home automation

    76 parts4MIT
  • 2 layers82.4 × 53.6 mmPico hd mcu v3, the printed circuit board in 3D

    Pico hd mcu v3

    ozgend/hd-mcu

    bluetooth supported mcu for harley davidson 99-03 with raspberry pi pico

    47 parts4GPL-3.0
  • 2 layers70 × 21.3 mmWireless measurement ard, the printed circuit board in 3D

    Wireless measurement ard

    benlhy/wireless_measurements

    A simple, compact wireless tool to measure low power circuits

    27 parts3
  • 2 layers30 × 8.5 mmQAM RX10, the printed circuit board in 3D

    QAM RX10

    neoxelox/diana

    Diana Dot project.

    11 parts3GPL-3.0
  • 2 layers11.6 × 13 mmQAM TX2, the printed circuit board in 3D

    QAM TX2

    neoxelox/diana

    Diana Dot project.

    6 parts3GPL-3.0
  • 4 layers66.5 × 47 mmFlight controller, the printed circuit board in 3D

    Flight controller

    shazmeenShz/ESP32-Flight-Controller

    Custom 4-layer IoT-Ready ESP32 Flight Controller PCB designed in KiCad 8 featuring USB Type-C, CH340C, MP1584 power management, MPU6050 interface, and manufacturing-ready Gerber files.

    48 parts3MIT
  • 2 layers50.8 × 38.1 mmMIR InputMod, the printed circuit board in 3D

    MIR InputMod

    TJLTM/MakeItRain

    DIY ESP-32 Based sprinkler Controller

    20 parts3
  • 2 layers30 × 85.5 mmPower Deck Longitudinal v0.1, the printed circuit board in 3D

    Power Deck Longitudinal v0.1

    dgtaheno/RocketOS

    ESP32 flight computer with MAVLink telemetry, QGroundControl integration, GPS, BMP388 altimetry, INA219 power monitoring and fault-tolerant SD logging

    8 parts2MIT
  • 2 layers72.6 × 103.6 mmBatteryHolder, the printed circuit board in 3D

    BatteryHolder

    DPIclimate/ag-node

    Automatic multi-weigh-station for measuring the live-weight of sheep in remote locations.

    4 parts2MIT
  • 2 layers83 × 72 mmLivello serbatoio definitiva, the printed circuit board in 3D

    Livello serbatoio definitiva

    giorossi91/livello_serbatoio

    This project realizes a simple device to monitor the water level in a tank.

    35 parts2GPL-3.0
  • 2 layers83 × 72 mmLivello serbatoio espansione, the printed circuit board in 3D

    Livello serbatoio espansione

    giorossi91/livello_serbatoio

    This project realizes a simple device to monitor the water level in a tank.

    8 parts2GPL-3.0
  • 6 layers72.1 × 65.5 mmFrankfurt eth pic, the printed circuit board in 3D

    Frankfurt eth pic

    grodansparadis/can4vscp-frankfurt-eth

    Frankfurt Ethernet to CAN4VSCP bridge

    62 parts2
  • 2 layers72 × 20 mmPower injector rev c, the printed circuit board in 3D

    Power injector rev c

    grodansparadis/can4vscp-power-injector

    Power injector module for CAN4VSCP

    11 parts2
  • 2 layers72 × 20 mmPower injector rev c, the printed circuit board in 3D

    Power injector rev c

    grodansparadis/can4vscp-power-injector

    Power injector module for CAN4VSCP

    15 parts2
  • 2 layers110 × 60 mmClearBell Ausseneinheit, the printed circuit board in 3D

    ClearBell Ausseneinheit

    akoerner-dev/ClearBell

    Selbst entwickeltes ESP32-Klingelsystem fuer ein Zweifamilienhaus - KiCad-Hardware und Arduino-Firmware (WLAN/UDP, HMAC-gesichert).

    47 parts1MIT
  • 2 layers98 × 60 mmClearBell Inneneinheit, the printed circuit board in 3D

    ClearBell Inneneinheit

    akoerner-dev/ClearBell

    Selbst entwickeltes ESP32-Klingelsystem fuer ein Zweifamilienhaus - KiCad-Hardware und Arduino-Firmware (WLAN/UDP, HMAC-gesichert).

    30 parts1MIT
  • 4 layers98 × 60 mmClearBell V0.2 Innen, the printed circuit board in 3D

    ClearBell V0.2 Innen

    akoerner-dev/ClearBell

    Selbst entwickeltes ESP32-Klingelsystem fuer ein Zweifamilienhaus - KiCad-Hardware und Arduino-Firmware (WLAN/UDP, HMAC-gesichert).

    59 parts1MIT
  • 2 layers120 × 65 mmStarting module v2, the printed circuit board in 3D

    Starting module v2

    ANTzacalie/termo-pro-esp32

    Full-featured smart thermostat built on the ESP32 platform.

    22 parts1CERN-OHL-P-2.0