Skip to the content

Hardware

1,802 boards

KiCad boards from 760 GitHub repositories tagged “hardware”, the most starred first; open any of them in PCBKit.

  • 2 layers25.4 × 17.8 mmVL53L1X, the printed circuit board in 3D

    VL53L1X

    vul-os/sirboard

    Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.

    28 parts56Apache-2.0
  • 2 layers27.9 × 25.4 mmWROOM02, the printed circuit board in 3D

    WROOM02

    vul-os/sirboard

    Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.

    12 parts56Apache-2.0
  • 2 layers47 × 48 mm2040-centered-4x-12deg, the printed circuit board in 3D

    2040-centered-4x-12deg

    jkominek/piano-conversion

    Hardware, and some firmware, for acoustic piano to MIDI controller conversion.

    14 parts53
  • 2 layers174 × 16.5 mmLed test bar, the printed circuit board in 3D

    Led test bar

    jkominek/piano-conversion

    Hardware, and some firmware, for acoustic piano to MIDI controller conversion.

    33 parts53
  • 2 layers83.8 × 83.8 mmSensorboard tester, the printed circuit board in 3D

    Sensorboard tester

    jkominek/piano-conversion

    Hardware, and some firmware, for acoustic piano to MIDI controller conversion.

    37 parts53
  • 2 layers9 × 29.5 mmSimple-1x, the printed circuit board in 3D

    Simple-1x

    jkominek/piano-conversion

    Hardware, and some firmware, for acoustic piano to MIDI controller conversion.

    7 parts53
  • 4 layers214 × 170 mmC68, the printed circuit board in 3D

    C68

    ProbablyNotArtyom/Blitz

    Blitz is a 68030 based homebrew computer I designed over the course of nearly 3 years, starting in late 2017.

    160 parts51GPL-2.0
  • 2 layers90 × 94 mmAmiga Drawbridge, the printed circuit board in 3D

    Amiga Drawbridge

    tebl/Amiga-DrawBridge

    A PCB build of Rob Smiths Amiga DrawBridge, an Arduino-based solution for reading and writing Amiga floppy disks on modern hardware. Also includes a version of Greaseweazle.

    19 parts51
  • 2 layers17.8 × 17.8 mmB00, the printed circuit board in 3D

    B00

    galopago/misistemita

    Electronic hardware prototyping system. Solderless, robust and open source. Solves the typical problem of the circuit that works on a breadboard but stops working on a real-world setup.

    9 parts47MIT
  • 2 layers27.9 × 17.8 mmB01, the printed circuit board in 3D

    B01

    galopago/misistemita

    Electronic hardware prototyping system. Solderless, robust and open source. Solves the typical problem of the circuit that works on a breadboard but stops working on a real-world setup.

    10 parts47MIT
  • 2 layers38.1 × 17.8 mmB02, the printed circuit board in 3D

    B02

    galopago/misistemita

    Electronic hardware prototyping system. Solderless, robust and open source. Solves the typical problem of the circuit that works on a breadboard but stops working on a real-world setup.

    10 parts47MIT
  • 2 layers48.3 × 17.8 mmB03, the printed circuit board in 3D

    B03

    galopago/misistemita

    Electronic hardware prototyping system. Solderless, robust and open source. Solves the typical problem of the circuit that works on a breadboard but stops working on a real-world setup.

    10 parts47MIT
  • 2 layers27.9 × 17.8 mmB04, the printed circuit board in 3D

    B04

    galopago/misistemita

    Electronic hardware prototyping system. Solderless, robust and open source. Solves the typical problem of the circuit that works on a breadboard but stops working on a real-world setup.

    8 parts47MIT
  • 2 layers38.1 × 17.8 mmB05, the printed circuit board in 3D

    B05

    galopago/misistemita

    Electronic hardware prototyping system. Solderless, robust and open source. Solves the typical problem of the circuit that works on a breadboard but stops working on a real-world setup.

    10 parts47MIT
  • 2 layers88.9 × 38.1 mmC00, the printed circuit board in 3D

    C00

    galopago/misistemita

    Electronic hardware prototyping system. Solderless, robust and open source. Solves the typical problem of the circuit that works on a breadboard but stops working on a real-world setup.

    42 parts47MIT
  • 2 layers38.1 × 48.3 mmC01, the printed circuit board in 3D

    C01

    galopago/misistemita

    Electronic hardware prototyping system. Solderless, robust and open source. Solves the typical problem of the circuit that works on a breadboard but stops working on a real-world setup.

    20 parts47MIT
  • 2 layers38.1 × 48.3 mmC02, the printed circuit board in 3D

    C02

    galopago/misistemita

    Electronic hardware prototyping system. Solderless, robust and open source. Solves the typical problem of the circuit that works on a breadboard but stops working on a real-world setup.

    20 parts47MIT
  • 2 layers68.6 × 38.1 mmC03, the printed circuit board in 3D

    C03

    galopago/misistemita

    Electronic hardware prototyping system. Solderless, robust and open source. Solves the typical problem of the circuit that works on a breadboard but stops working on a real-world setup.

    33 parts47MIT
  • 2 layers58.4 × 38.1 mmC04, the printed circuit board in 3D

    C04

    galopago/misistemita

    Electronic hardware prototyping system. Solderless, robust and open source. Solves the typical problem of the circuit that works on a breadboard but stops working on a real-world setup.

    14 parts47MIT
  • 2 layers88.9 × 27.9 mmC05, the printed circuit board in 3D

    C05

    galopago/misistemita

    Electronic hardware prototyping system. Solderless, robust and open source. Solves the typical problem of the circuit that works on a breadboard but stops working on a real-world setup.

    19 parts47MIT
  • 2 layers68.6 × 48.3 mmC07, the printed circuit board in 3D

    C07

    galopago/misistemita

    Electronic hardware prototyping system. Solderless, robust and open source. Solves the typical problem of the circuit that works on a breadboard but stops working on a real-world setup.

    25 parts47MIT
  • 2 layers58.4 × 48.3 mmC08, the printed circuit board in 3D

    C08

    galopago/misistemita

    Electronic hardware prototyping system. Solderless, robust and open source. Solves the typical problem of the circuit that works on a breadboard but stops working on a real-world setup.

    26 parts47MIT
  • 2 layers38.1 × 17.8 mmC09, the printed circuit board in 3D

    C09

    galopago/misistemita

    Electronic hardware prototyping system. Solderless, robust and open source. Solves the typical problem of the circuit that works on a breadboard but stops working on a real-world setup.

    11 parts47MIT
  • 2 layers27.9 × 27.9 mmC10, the printed circuit board in 3D

    C10

    galopago/misistemita

    Electronic hardware prototyping system. Solderless, robust and open source. Solves the typical problem of the circuit that works on a breadboard but stops working on a real-world setup.

    12 parts47MIT