
Hardware designs
194 boardsKiCad boards from 92 GitHub repositories tagged “hardware-designs”, the most starred first; open any of them in PCBKit.
- 4 layers100 × 80 mm

- 4 layers150 × 100 mm

Interrupter v1.2
Alberto0235/DRSSTC-Fiber-Optic-Interrupter
Custom 4-layer interrupter control board for DRSSTC systems. STM32F405-based, fiber-optically isolated outputs, hardware E-brake safety chain, and controlled-impedance routing (90Ω USB, 50Ω FSMC/SDIO).
212 partsMIT - 2 layers92.3 × 54.5 mm

Industrial STM32-CAN Node
bgmbzk/Industrial-STM32-CAN-Node
Industrial-grade CAN-Bus Node design based on STM32F103. Features SMD components, high-reliability routing, and production-ready Gerber files.
13 parts - 4 layers76 × 74.3 mm

MCU PSU
Blaze-Pascal/EKA-PiF-MCU_PSU
2-phase synchronous digitally controlled buck converter (30V in, up to 10A out). Features a 4-layer custom KiCad PCB optimized for EMI.
119 partsGPL-3.0 - 2 layers340 × 100 mm

Queue Local Display ATmega328PB
ByNS-KARACA/Queue-Local-Display-ATmega328PB
Queue Local Display – ATmega328PB
206 parts - 2 layers127 × 110 mm

UNICON board
dodotronix/RobotClaire
This project is focused on a design of an autonomous robot including its electronics and basic software to present robot's features
132 parts - 2 layers79 × 65 mm

Detonator trigger
graysam/PeRci
ESP32-S3 Firmware and Web/App to manage HV discharge initiator for big bada-booms.
24 partsGPL-3.0 - 2 layers163.8 × 116.8 mm

- 2 layers46.5 × 19.6 mm

Arduino nano custom board
marwantm/arduino-nano-custom-board
Custom 2-layer Arduino Nano clone built around the ATmega328P.
37 parts - 2 layers100 × 100 mm

ESP12E
Mohamed-U3/Pressure-measuring-and-control-Board
This repository contains KiCad 9.0.2 schematics for a pressure‑control system built around an ESP‑12E module, dual precision pressure measurement channels, high‑side battery/adapter power path control, and isolated…
129 partsMIT - 2 layers217.6 × 52.6 mm

USR LED Board
Natasha-Eman/32-bit-Universal-Shift-Register
32-bit Universal Shift Register designed in Logisim Evolution and implemented as a modular two-board PCB in KiCad with complete schematics, PCB layouts, 3D models, and manufacturing-ready Gerber files.
77 partsMIT - 4 layers102.4 × 83.1 mm

PLC4UNI GC1
paulmartinezcuenta/PLC4UNI
Development of programmable logic controller, product for mechatronic design.
179 partsMIT - 2 layers66 × 67 mm

AC Controller
Qeteshpony/AC-Controller
Universal WiFi-Based remote control for IoT Devices
88 partsBSD-2-Clause - 6 layers98.9 × 81.4 mm

EthernetSwitch
SamuelCicuitStudio/LAN9645-STM32-Managed-Ethernet-Switch
Managed Ethernet switch platform built around the LAN9645 and STM32H743, featuring copper and SerDes ports, SPI management, RMII, LwIP, and a USB diagnostic CLI.
231 parts - 2 layers49.7 × 37.6 mm

Transforemerless power supply
vaibhav-rm/kicad-portfolio
A collection of PCB designs built with KiCad. Each project lives in its own folder with schematic, PCB layout, and its own README
18 parts - 2 layers138.5 × 36.5 mm

5V Regulated Power Supply PCB
vishalbodkhe/5V-Regulated-Power-Supply-PCB
12V DC to 5V regulated power supply PCB designed using KiCad with protection, filtering, DRC verification and Gerber files.
11 parts - 2 layers100 × 90.5 mm

ESP32-Environmental Monitoring PCB
vishalbodkhe/ESP32-Environmental-Monitoring-PCB
ESP32-based environmental monitoring PCB designed in KiCad with DHT11, LDR, OLED, custom routing, GND zone and manufacturing-ready Gerber files.
19 parts - 4 layers52 × 57.8 mm

ZED F9P
Will946/GNSS
u-blox ZED-F9P RTK GNSS breakout board with dual-band L1/L2 reception and centimeter-level positioning accuracy.
65 partsMIT - 4 layers43 × 66 mm

- 4 layers135.2 × 73.1 mm

Motor Health Monitoring PCB
YUKESH0620/Motor_Health_Monitoring_8051_PCB
Motor Health Monitoring PCB designed using KiCad. This repository contains the complete hardware design including schematic, PCB layout, custom libraries, manufacturing files, and design reports.
112 partsMIT - 2 layers26 × 30 mm

Expansion Card
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
11 parts1.1kCC-BY-4.0 - 2 layers24 × 27.3 mm

Expansion Card Retrofit
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
9 parts1.1kCC-BY-4.0 - 2 layers51.4 × 61 mm

- 2 layers80 × 80 mm
