Fpv

17 boards

KiCad boards from 12 GitHub repositories tagged “fpv”, the most starred first; open any of them in PCBKit.

2 layers42.5 × 28.8 mm
C5VRX JACK DIY V2
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
18 parts515GPL-3.0
2 layers36 × 43 mm
Asac fc rev a
victorhook/asac-fc
asac fc is an rp2040 based flight controller made for FPV drone flying
119 parts52GPL-3.0
2 layers43.8 × 39.4 mm
MIPI SPY
jergling/MIPI-Spy
Hardware tools for non-invasively sniffing MIPI D-Phy links.
6 parts28GPL-3.0
2 layers37 × 18.3 mm
RTL8812AU module
ochin-space/ochin-CM4v2
It' the repository for the docs and schematics related to the ochin-CM4v2.x.x Carrier Board
9 parts25GFDL-1.3
2 layers19.1 × 21.8 mm
Esp32c5-airunit nano
us3r-d0e5nt-3x1st/esp32c5-airunit-nano
air-unit based on esp32c5-wroom-1u and ov5640, made for the hx-esp32-cam-fpv project, supports both digital video with osd and rc control
24 parts3
6 layers13 × 11.1 mm
ELRS Receiver
aprskalo1/nano24-elrs-receiver
nano24: compact 2.4 GHz ExpressLRS receiver prototype with ESP32-C3, SX1281, CRSF and a printed Wi-Fi antenna. KiCad sources, BOM, Gerbers and validation notes.
47 partsCERN-OHL-S-2.0
4 layers20 × 50 mm
PiESC S1 PCB20x50
CoPYGolF97/PiESC
Open-source 3-phase BLDC ESC firmware and hardware for RP2350-based multirotor aircraft.
28 partsGPL-3.0
4 layers62 × 42 mm
Hybrid Controller
DesignStraub/ringwheel-hybrid-drone
A 5-inch FPV drone whose prop ducts fold down and become wheels. Design study in Fusion 360 and KiCad, CC BY-NC-SA 4.0.
103 parts
6 layers48 × 52 mm
Kestrel esc
HeyPCB/kestrel-esc
Kestrel 4in1: 6S 4-in-1 ESC running stock AM32 on four STM32G071s, with 24 CSD18540 FETs, LM5109B drivers and battery current sensing. 48 x 52 mm 6-layer KiCad 10 board, DRC clean, with gerbers, BOM, CPL and STEP.
174 partsCERN-OHL-S-2.0
6 layers40 × 40 mm
Kestrel fc
HeyPCB/kestrel-fc
Kestrel H7: STM32H743 FPV flight controller with ICM-20602 + BMI088, MS5611, 16 MB blackbox, 5 V and switchable 10 V BECs.
114 partsCERN-OHL-S-2.0
4 layers28 × 28 mm
Kestrel gps
HeyPCB/kestrel-gps
Kestrel GPS: u-blox MAX-M10S under a 25 mm ceramic patch with an LIS3MDL compass, for Betaflight, INAV and ArduPilot. 28 x 28 mm 4-layer KiCad 10 board, DRC clean, with gerbers, BOM, CPL and STEP.
14 partsCERN-OHL-S-2.0
4 layers80 × 80 mm
Bluepill QuadFC Carrier
SimulatedFlow/kicad-board-2026-07-29-bluepill-quad-fc
STM32 Bluepill quadcopter flight controller board - IMU, ESC headers and receiver input. Bare PCB, KiCad source files.
21 parts
2 layers42.5 × 28.8 mm
C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0
2 layers42.5 × 28.8 mm
C5VRX JACK DIY V3
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
18 parts515GPL-3.0
4 layers36 × 43 mm
Asac fc rev b
victorhook/asac-fc
asac fc is an rp2040 based flight controller made for FPV drone flying
80 parts52GPL-3.0
2 layers41.7 × 34.9 mm
DJI A
jergling/MIPI-Spy
Hardware tools for non-invasively sniffing MIPI D-Phy links.
3 parts28GPL-3.0
2 layers24 × 24 mm
Eckplatine
DesignStraub/ringwheel-hybrid-drone
A 5-inch FPV drone whose prop ducts fold down and become wheels. Design study in Fusion 360 and KiCad, CC BY-NC-SA 4.0.
13 parts