6 layers82 × 155 mm
Electronics projects
48 boardsKiCad boards from 22 GitHub repositories tagged “electronics-projects”, the most starred first; open any of them in PCBKit.
- 2 layers160 × 100 mm
CodyComputer
fjmilens3/cody-computer
Design files and source code for the Cody Computer.
59 parts64GPL-3.0 - 2 layers25.4 × 57.2 mm
OpenTherm Click
michpro/mikroBUS
Collection of add-on boards in mikroBUS™ standard
58 parts5CERN-OHL-P-2.0 - 2 layers63 × 89.5 mm
- 2 layers68.6 × 53.3 mm
Arduino LMeter shield
michpro/Arduino_LMeter_shield
Arduino Inductance Meter shield
33 parts3CERN-OHL-P-2.0 - 2 layers22.9 × 26.8 mm
Base 32u
EmulationOnline/chiplab
The Chiplab is a platform for researching behavior of digital integrated circuits. It includes provides instrumentation to run programs against real hardware and observe the results.
22 parts2BSD-4-Clause - 4 layers25.4 × 62.7 mm
- 4 layers40 × 58 mm
STM32-S Plant
Fred98246/STM32-Environmental-Sensor-and-Datalogging-Board
An open-source STM32F103C8T6 development board designed for environmental monitoring, featuring integrated Li-Ion battery management, USB-C, MicroSD data logging, and onboard I2C sensors for temperature, humidity, and…
59 parts2MIT - 2 layers77.5 × 67.1 mm
Fibre tree LED controller
koczadly/xmas-led-controller
Personal project to revitalise an ancient fibre optic Christmas tree using a custom-built digital LED module
53 parts2MIT - 2 layers48.3 × 50.8 mm
Electronic load controller
ondras12345/electronic-load
Digital control for XHDZ-FZ-2g electronic load
63 parts2MIT - 2 layers81.3 × 76.2 mm
Rgb matrix pcb
1-max-1/rgb-matrix
PCB and software for driving an 8x8 matrix of common anode RGB LED's.
36 parts1 - 2 layers41 × 31 mm
STM32 hardware design Course
Fred98246/STM-32-PCB-Design
Custom STM32F103C8T6 development board
32 parts1MIT - 2 layers127.4 × 101.5 mm
BMS Can Bus
hasanberkdasar/BMS-Can-Bus
Smart Battery Management System (BMS) with CAN Bus communication, using BQ76952 and KiCad.
59 parts1MIT - 2 layers68.6 × 53.3 mm
Arduino OpenTherm shield
michpro/Arduino_OpenTherm_shield
Arduino hardware shield to send and receive data from OpenTherm devices
55 parts1CERN-OHL-P-2.0 - 2 layers11.2 × 16.3 mm
PY32F002 ESSOP10 minimal board
michpro/PY32F002_ESSOP10_minimal_board
Puya PY32F002A ARM M0+ minimal development board (ESSOP10 package)
9 parts1CERN-OHL-P-2.0 - 2 layers41.9 × 20.3 mm
- 2 layers101.6 × 71.1 mm
Water level indicator
JKCadilo14-CpE/DIY-Circuits
Collection of electronic circuits I designed, tested, and documented using KiCad
18 partsMIT - 2 layers17.8 × 33 mm
Arduino Pro Mini Dx
michpro/Arduino_Pro_Mini_Dx
AVRDx uC module in Arduino Pro Mini format
26 partsCERN-OHL-P-2.0 - 2 layers18.5 × 33.3 mm
Arduino Pro Mini XL
michpro/Arduino_Pro_Mini_XL
ATmega1284P uC module in Arduino Pro Mini format
21 partsCERN-OHL-P-2.0 - 2 layers110.5 × 82.8 mm
4-Bit Adder Circuit
Nikhil-Misal-24/4-Bit-Binary-Adder-PCB
Design of a 4-bit binary adder PCB using 74HC86 XOR, 74HC08 AND, and 74HC32 OR ICs, featuring switch-based inputs, LED outputs, and a regulated 5V DC power supply. Designed using KiCad.
58 parts - 2 layers90.2 × 61 mm
Electricity meter
ondras12345/electricity-meter
An STM32-based datalogger for electricity meters with pulse LED
95 partsMIT - 2 layers
Set Reset Latch Using BC547
Stphn-Jn/RS-Latch-BC547
This repository contains the schematic diagram and PCB layout for an RS (Set-Reset) Latch circuit built using BC547 NPN transistors.
14 parts - 2 layers53.3 × 29.6 mm
CodyCartridge
fjmilens3/cody-computer
Design files and source code for the Cody Computer.
8 parts64GPL-3.0 - 2 layers160.3 × 65 mm
CodyKeyboard
fjmilens3/cody-computer
Design files and source code for the Cody Computer.
33 parts64GPL-3.0