Skip to the content

Cpp

127 boards

KiCad boards from 77 GitHub repositories tagged “cpp”, the most starred first; open any of them in PCBKit.

  • 2 layers110.1 × 111.8 mmAutomative Hexapod, the printed circuit board in 3D

    Automative Hexapod

    NguyenTrongPhuc552003/reinforcement-autonomous-hexapod

    Intelligent hexapod control system with AI-based adaptive gait, kernel drivers, and user-space coordination.

    70 parts3GPL-2.0
  • 2 layers80 × 40 mmAtt85, the printed circuit board in 3D

    Att85

    stefan-misik/ws2812b-light

    Minimalist Christmas lights using WS2812B LEDs and ATtiny85 or STM32G070

    41 parts3MIT
  • 2 layers90 × 90 mmSahel battery, the printed circuit board in 3D

    Sahel battery

    Aliou8/SAHEL-SPECTRA-RF

    CubeSat for educational purposes. It is based on an STM32H7 MCU for data handling and uses two CC1125 radios for communication. The software is developed using a Zephyr-like RTOS.

    41 parts2GPL-3.0
  • 2 layers90 × 90 mmSahel solar, the printed circuit board in 3D

    Sahel solar

    Aliou8/SAHEL-SPECTRA-RF

    CubeSat for educational purposes. It is based on an STM32H7 MCU for data handling and uses two CC1125 radios for communication. The software is developed using a Zephyr-like RTOS.

    59 parts2GPL-3.0
  • 2 layers60 × 82 mmATtiny, the printed circuit board in 3D

    ATtiny

    Complubot/AZ5

    Hacemos roboces tope tochos

    33 parts2GPL-3.0
  • 2 layers47 × 75.6 mmATtiny 3.0, the printed circuit board in 3D

    ATtiny 3.0

    Complubot/AZ5

    Hacemos roboces tope tochos

    39 parts2GPL-3.0
  • 2 layers21.4 × 26.4 mmATtiny prototipado, the printed circuit board in 3D

    ATtiny prototipado

    Complubot/AZ5

    Hacemos roboces tope tochos

    5 parts2GPL-3.0
  • 2 layersMAXPOWER, the printed circuit board in 3D

    MAXPOWER

    Complubot/AZ5

    Hacemos roboces tope tochos

    115 parts2GPL-3.0
  • 2 layers83 × 72 mmLivello serbatoio definitiva, the printed circuit board in 3D

    Livello serbatoio definitiva

    giorossi91/livello_serbatoio

    This project realizes a simple device to monitor the water level in a tank.

    35 parts2GPL-3.0
  • 2 layers83 × 72 mmLivello serbatoio espansione, the printed circuit board in 3D

    Livello serbatoio espansione

    giorossi91/livello_serbatoio

    This project realizes a simple device to monitor the water level in a tank.

    8 parts2GPL-3.0
  • 4 layers100 × 80 mmCoupon, the printed circuit board in 3D

    Coupon

    mcbronkowitch/fireflow

    FireFlow — a modulation-first ambient groovebox: the modulation system is the instrument, not a layer on top of it. Five independent lanes per part driving a synth, granular, wavetable, resonator or bucket-brigade deck.

    78 parts2MIT
  • 2 layers65 × 56 mmAI4R PIHAT, the printed circuit board in 3D

    AI4R PIHAT

    pranavpai/Autonomous-RC-Car-AI-Project

    Autonomous RC car with cone-based lane keeping, ToF obstacle avoidance, and software-in-the-loop simulation using ROS2

    15 parts2MIT
  • 2 layers29.8 × 42.5 mmDriverUnit, the printed circuit board in 3D

    DriverUnit

    syauqibilfaqih/Pullback-Device

    Low-cost open source pullback device for varicose vein surgery

    8 parts2MIT
  • 2 layers71.8 × 23.5 mmPowerUnit, the printed circuit board in 3D

    PowerUnit

    syauqibilfaqih/Pullback-Device

    Low-cost open source pullback device for varicose vein surgery

    6 parts2MIT
  • 2 layers20.3 × 80.8 mmController, the printed circuit board in 3D

    Controller

    FRC-1721/AccidentCounter

    A digital sign hung in the build space advertising days without incident

    5 parts1
  • 6 layers36.1 × 36 mmDroneHardware, the printed circuit board in 3D

    DroneHardware

    GiovanniRaseraF/DroneTheory

    Tests, Theory, Development of Drone HW and SW + Vespin 1 Hardware

    49 parts1GPL-3.0
  • 4 layers48.3 × 47.5 mmHWCorso, the printed circuit board in 3D

    HWCorso

    GiovanniRaseraF/DroneTheory

    Tests, Theory, Development of Drone HW and SW + Vespin 1 Hardware

    48 parts1GPL-3.0
  • 2 layers43.1 × 48.2 mmJeepPCB, the printed circuit board in 3D

    JeepPCB

    GiovanniRaseraF/DroneTheory

    Tests, Theory, Development of Drone HW and SW + Vespin 1 Hardware

    21 parts1GPL-3.0
  • 2 layers50.8 × 101.6 mmAbsonus v0.1, the printed circuit board in 3D

    Absonus v0.1

    ideocentric/ribbon-synth

    Ribbon Synthesizer using Daisy Seed.

    17 parts1MIT
  • 2 layers50.8 × 101.6 mmAbsonus v0.2, the printed circuit board in 3D

    Absonus v0.2

    ideocentric/ribbon-synth

    Ribbon Synthesizer using Daisy Seed.

    20 parts1MIT
  • 2 layers106 × 50.8 mmBattery holder, the printed circuit board in 3D

    Battery holder

    ideocentric/ribbon-synth

    Ribbon Synthesizer using Daisy Seed.

    6 parts1MIT
  • 2 layersLipo charger booster, the printed circuit board in 3D

    Lipo charger booster

    ideocentric/ribbon-synth

    Ribbon Synthesizer using Daisy Seed.

    11 parts1MIT
  • 2 layers88.9 × 30.5 mmPower unit, the printed circuit board in 3D

    Power unit

    ideocentric/ribbon-synth

    Ribbon Synthesizer using Daisy Seed.

    9 parts1MIT
  • 2 layers161 × 76.5 mmJoypad, the printed circuit board in 3D

    Joypad

    Inu-Labs/fwkes

    NES emulator for a 32-bit ARM-based RP2350 microcontroller.

    21 parts1GPL-2.0