Commodore 64

73 boards

KiCad boards from 39 GitHub repositories tagged “commodore-64”, the most starred first; open any of them in PCBKit.

4 layers56.1 × 57.1 mm
MCL86jr
MicroCoreLabs/Projects
Ted Fried's MicroCore Labs Projects - FPGA CPU cores and emulators for the 8088, 8086, 8051, 6502, 68000, Z80, Risc-V, and also Typewriter and EPROM Emulator projects.
66 parts534
2 layers58.4 × 50.8 mm
OpenC64Cart
SukkoPera/OpenC64Cart
Open Hardware 8Kb Cartridge for the Commodore 64
12 parts117
2 layers19.6 × 41.5 mm
Open2327RomAdapter
SukkoPera/Open2327RomAdapter
Open Hardware 2364-27xxx (E)EPROM Adapter PCB
10 parts85
2 layers23.2 × 52.1 mm
OpenC64Saver
SukkoPera/OpenC64Saver
Protect your Commodore 64 from killer power supplies!
17 parts79
2 layers58.9 × 44.2 mm
OpenPSX2AmigaPadAdapter
SukkoPera/OpenPSX2AmigaPadAdapter
Playstation to Commodore Amiga/CD32 Controller Adapter
43 parts69
4 layers17.5 × 35 mm
KungFuSID
Sgw32/KungFuSID
Kung Fu SID is a firmware based on Kung Fu Flash which allows SID emulation
35 parts65
2 layers47.8 × 31.2 mm
OpenC64MegaDrivePadAdapter
SukkoPera/OpenC64MegaDrivePadAdapter
Safely connect your Sega Mega Drive/Genesis controllers to your Commodore 64 or Amiga
16 parts64
2 layers97.8 × 97.8 mm
C64 Pi1541-II Module
tebl/C64-Pi1541-II
I wanted a Pi1541 module that did not feel like I was handling bare electronics, so I made one that hides most of the scary bits (no 3d-printer required).
31 parts59
2 layers58.4 × 50.8 mm
OpenC64Cart16K
SukkoPera/OpenC64Cart16K
Open Hardware 16 KB Cartridge for the Commodore 64
11 parts53
2 layers58.4 × 61.7 mm
OpenC64WarpSpeed
SukkoPera/OpenC64WarpSpeed
Open Hardware Fast Loader cartridge for the Commodore 64 and 128 - DO NOT USE!!!
19 parts50
2 layers70.5 × 48.9 mm
C64 XUM1541-II
tebl/C64-XUM1541-II
An updated version of my C64 XUM1541, this supports the newer XUM1541 firmware and comes with a few extra goodies.
20 parts50
2 layers64.1 × 39.4 mm
C64-Power Saver
tebl/C64-Power-Saver
C64 power supplies are ancient, they go bad every day so use protection!
16 parts46
2 layers99.4 × 99.9 mm
C64-BlinkenDiag
tebl/C64-BlinkenDiag
A version of the DIAG64cart, this mainly changes components for the ones I've already got and adds a lot of LEDs. It's a blinkenlight project for diagnostic usage.
64 parts44
2 layers100 × 100 mm
C64 Pi1541-III Module
tebl/C64-Pi1541-III
I wanted a Pi1541-module that did not feel like I was handling bare electronics, so I made another that manages to hide most of the scary bits without needing a 3d-printer.
25 parts44
2 layers33.7 × 56.5 mm
Lumafix
tebl/C64-Lumafix
An easier to solder version of the Lumafix board, components spaced out a bit more to make things easier on the beginner (mostly meaning me).
12 parts39
2 layers63.5 × 63.4 mm
C64 Modulator
tebl/C64-Modulator-Replacement
A simple modulator replacement for Commodore 64s with "longboards", complements my Lumafix version as well adding an audio connector for second SID.
40 parts39
2 layers64.1 × 39.4 mm
C64-XUM1541
tebl/C64-XUM1541
Simple PCB for building a XUM1541, a device for copying data to and from Commodore 1541 disk drives using a modern computer.
6 parts38
2 layers65 × 56.5 mm
RPi Hat
tebl/C64-Pi1541-Module
I wanted an alternative to the SD2IEC on my Commodore 64, and I almost instantly took a liking to Pi1541 software.
22 parts34
2 layers20.3 × 47.6 mm
C64-Kernal Switcher
tebl/C64-Kernal-Switcher
Switchless kernal switcher for the common breadbin Commodore 64, "longboards". Reuses power LED for easier use.
12 parts33
2 layers99.7 × 74.9 mm
C64 Joykey 2040
tebl/C64-JoyKEY
WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.
69 parts27
2 layers48.9 × 41.9 mm
C64-Stereo SID
tebl/C64-Stereo-SID
There are many Stereo SID boards, but this one in mine... Add a second SID of the same type or newer substitutes for adding stereo audio to your system...
21 parts23
2 layers81.3 × 40.6 mm
C64-Joystick Adapter
tebl/C64-Joystick-Adapter
A simple device that allows the connection of two Commodore 64 joysticks to a modern computer over USB (using an Arduino Pro Micro). The overall goal is to be able to use vintage joysticks with emulators.
20 parts22
2 layers99.7 × 64.1 mm
PlayOnTape Module
tebl/C64-PlayOnTape
It's a tapuino, mostly because I wanted to build one. Uses an Arduino to load tapes on the good old Commodore 64.
32 parts22
2 layers49.3 × 81.9 mm
C64-Joystick Switcher
tebl/C64-Joystick-Switcher
Wanted a joystick switcher for my Commodore 64, so I built one by adapting C64 Mega Switcher for use with Atari-style joysticks.
30 parts21