Skip to the content

Canbus

54 boards

KiCad boards from 26 GitHub repositories tagged “canbus”, the most starred first; open any of them in PCBKit.

  • 2 layers232.1 × 131.2 mmPanel, the printed circuit board in 3D

    Panel

    ZeniteSolar/MSC19

    Voltage or Current Sensor Module for CANBUS with ATmega328p

    313 partsGPL-3.0
  • 2 layers247.1 × 121 mmBasicsensormodule, the printed circuit board in 3D

    Basicsensormodule

    ZeniteSolar/MVC19

    Módulo de voltímetro interligado ao CAN

    212 partsGPL-3.0
  • 2 layers67 × 21.3 mmCANBUS Flipper, the printed circuit board in 3D

    CANBUS Flipper

    ElectronicCats/flipper-addons

    Flipper addons by Electronic Cats

    42 parts133
  • 2 layers67 × 25 mmFLIPPER ETHERNET, the printed circuit board in 3D

    FLIPPER ETHERNET

    ElectronicCats/flipper-addons

    Flipper addons by Electronic Cats

    38 parts133
  • 2 layers62.8 × 23.2 mmFLIPPER MOD BUS, the printed circuit board in 3D

    FLIPPER MOD BUS

    ElectronicCats/flipper-addons

    Flipper addons by Electronic Cats

    27 parts133
  • 4 layers67 × 31.3 mmFlipper subg, the printed circuit board in 3D

    Flipper subg

    ElectronicCats/flipper-addons

    Flipper addons by Electronic Cats

    47 parts133
  • 2 layers34 × 67 mmFlipper UWB, the printed circuit board in 3D

    Flipper UWB

    ElectronicCats/flipper-addons

    Flipper addons by Electronic Cats

    21 parts133
  • 2 layers66 × 73.1 mmMags, the printed circuit board in 3D

    Mags

    ElectronicCats/flipper-addons

    Flipper addons by Electronic Cats

    30 parts133
  • 2 layers67 × 74.7 mmMarauder spoof, the printed circuit board in 3D

    Marauder spoof

    ElectronicCats/flipper-addons

    Flipper addons by Electronic Cats

    46 parts133
  • 2 layers34 × 16 mmOBDII connector, the printed circuit board in 3D

    OBDII connector

    ElectronicCats/flipper-addons

    Flipper addons by Electronic Cats

    9 parts133
  • 2 layers67.3 × 52.1 mmCAN2Serial, the printed circuit board in 3D

    CAN2Serial

    AugustoS97/BMS-BatterySystem

    Repositorio con el diseño de un BMS y una batería como TFM

    42 parts7GPL-3.0
  • 2 layers80 × 55.6 mmEPSolar CAN, the printed circuit board in 3D

    EPSolar CAN

    AugustoS97/BMS-BatterySystem

    Repositorio con el diseño de un BMS y una batería como TFM

    50 parts7GPL-3.0
  • 4 layers25.5 × 30 mmB CAN Module, the printed circuit board in 3D

    B CAN Module

    ilicmiljan/open-can-controller

    Open-source CAN bus controller for BMW E9X instrument clusters (Firmware + PCB)

    30 parts5GPL-3.0
  • 2 layers142 × 98 mmMultiplexer, the printed circuit board in 3D

    Multiplexer

    eddyem/tsys01

    BTA primary mirror thermal monitoring using STM32 and TSYS01

    89 parts4GPL-3.0
  • 2 layers38 × 22 mmRJ45 plate, the printed circuit board in 3D

    RJ45 plate

    eddyem/tsys01

    BTA primary mirror thermal monitoring using STM32 and TSYS01

    7 parts4GPL-3.0
  • 2 layers109 × 74 mmStm32, the printed circuit board in 3D

    Stm32

    eddyem/tsys01

    BTA primary mirror thermal monitoring using STM32 and TSYS01

    92 parts4GPL-3.0
  • 2 layers78.5 × 64.5 mmStm32f042, the printed circuit board in 3D

    Stm32f042

    eddyem/tsys01

    BTA primary mirror thermal monitoring using STM32 and TSYS01

    46 parts4GPL-3.0
  • 2 layers46 × 34 mmTermorez, the printed circuit board in 3D

    Termorez

    eddyem/tsys01

    BTA primary mirror thermal monitoring using STM32 and TSYS01

    24 parts4GPL-3.0
  • 2 layers47.5 × 9.5 mmTsys01 singleside, the printed circuit board in 3D

    Tsys01 singleside

    eddyem/tsys01

    BTA primary mirror thermal monitoring using STM32 and TSYS01

    7 parts4GPL-3.0
  • 2 layersWatch, the printed circuit board in 3D

    Watch

    KIIT-Robotic-Society/Dharma_RoboFest4.0

    Dharma Bot is a quadruped robotic dog featuring 12-DOF locomotion, real-time sensing, and a modular subsystem design.

    80 parts4MIT
  • 2 layers39 × 42.8 mmWatch v3, the printed circuit board in 3D

    Watch v3

    KIIT-Robotic-Society/Dharma_RoboFest4.0

    Dharma Bot is a quadruped robotic dog featuring 12-DOF locomotion, real-time sensing, and a modular subsystem design.

    79 parts4MIT
  • 2 layers172.9 × 81.5 mmMCB19, the printed circuit board in 3D

    MCB19

    ZeniteSolar/MCB19

    Modulo de carregamento das baterias auxiliares

    137 parts2GPL-3.0
  • 2 layers121.3 × 52.1 mmBasicsensormodule, the printed circuit board in 3D

    Basicsensormodule

    ZeniteSolar/MT19

    Tachometer Module for CANBUS with ATmega328p

    63 parts2GPL-3.0
  • 2 layers170.2 × 137.2 mmMCS19, the printed circuit board in 3D

    MCS19

    ZeniteSolar/MCS19

    Módulo de Carregamento do Sistema da embarcação solar Guarapuvu II (Zênite Solar)

    160 parts1GPL-3.0