Skip to the content
PCBKitNew board

Analog front end

9 boards

KiCad boards from 5 GitHub repositories tagged “analog-front-end”, the most starred first; open any of them in PCBKit.

  • 2 layers85 × 55 mmFinal schematics, the printed circuit board in 3D

    Final schematics

    shreenandansonu/Electronic-Stethescope

    EKOBIT is an electronics stethoscope, a AFE signal board for a digital stethoscope.

    59 parts3MIT
  • 4 layers100 × 100 mmAFE, the printed circuit board in 3D

    AFE

    Blaze-Pascal/Masters-Multi-Channel_DAQ

    Custom 2-channel digital oscilloscope DAQ with 20MHz bandwidth. Built with a custom KiCad analog front-end (AFE) PCB, Gowin FPGA (Tang Nano 9K) for high-speed signal buffering (VHDL), and an RPi Pico MCU for SCPI-like…

    216 parts2GPL-3.0
  • 2 layers100 × 80 mmG474 Integrated Analyzer, the printed circuit board in 3D

    G474 Integrated Analyzer

    Larryhul/periodic-signal-analyzer

    STM32G474 periodic signal analyzer: FFT harmonic measurement (Upp/Urms/fundamental/spectrum), OPA2365 front end, KiCad PCB, firmware & dashboard. 2026 Shanghai electronic design contest, Problem G. 周期信号测量分析装置

    64 partsMIT
  • 2 layers78 × 99.5 mmPrecision AFE ESP32, the printed circuit board in 3D

    Precision AFE ESP32

    LemonAidLee/Precision-Analog-Front-End

    A highly precise, ±100 mV analog front-end (AFE) designed for the ESP32 and ADS1115. Features a 4-stage TL082 architecture including a Sallen-Key low-pass filter, delivering 9.4 µV/LSB resolution for precision data…

    29 partsCERN-OHL-P-2.0
  • 2 layers50 × 32 mmUnipa bioamp pro, the printed circuit board in 3D

    Unipa bioamp pro

    Mustafa-Yagci/unipa-bioamp-pro

    Precision Biopotential Analog Front-End (AFE) for ECG/EMG/EEG | CMRR >100 dB | Driven Right Leg (DRL) Active Feedback | KiCad 8 & Production Gerbers

    27 partsMIT
  • 2 layers40 × 40 mmFinal schematics, the printed circuit board in 3D

    Final schematics

    shreenandansonu/Electronic-Stethescope

    EKOBIT is an electronics stethoscope, a AFE signal board for a digital stethoscope.

    54 parts3MIT
  • 4 layers50 × 26 mmPSU, the printed circuit board in 3D

    PSU

    Blaze-Pascal/Masters-Multi-Channel_DAQ

    Custom 2-channel digital oscilloscope DAQ with 20MHz bandwidth. Built with a custom KiCad analog front-end (AFE) PCB, Gowin FPGA (Tang Nano 9K) for high-speed signal buffering (VHDL), and an RPi Pico MCU for SCPI-like…

    29 parts2GPL-3.0
  • 4 layers167 × 92 mm作业三b NTC数字温度计 底板预览, the printed circuit board in 3D

    作业三b NTC数字温度计 底板预览

    Larryhul/periodic-signal-analyzer

    STM32G474 periodic signal analyzer: FFT harmonic measurement (Upp/Urms/fundamental/spectrum), OPA2365 front end, KiCad PCB, firmware & dashboard. 2026 Shanghai electronic design contest, Problem G. 周期信号测量分析装置

    25 partsMIT
  • 2 layers160 × 89.5 mmKiCad工程, the printed circuit board in 3D

    KiCad工程

    Larryhul/periodic-signal-analyzer

    STM32G474 periodic signal analyzer: FFT harmonic measurement (Upp/Urms/fundamental/spectrum), OPA2365 front end, KiCad PCB, firmware & dashboard. 2026 Shanghai electronic design contest, Problem G. 周期信号测量分析装置

    10 partsMIT