Amiga hardware

18 boards

KiCad boards from 16 GitHub repositories tagged “amiga-hardware”, the most starred first; open any of them in PCBKit.

2 layers100 × 71.5 mm
OpenAmiga500FastRamExpansion
SukkoPera/OpenAmiga500FastRamExpansion
4/8 MB Fast RAM Expansion for the Commodore Amiga 500
35 parts88
2 layers50.3 × 64.8 mm
Denise adapter
niklasekstrom/flickerfixer
An open source flicker fixer for Amiga 500/2000
9 parts69CC0-1.0
2 layers58.9 × 44.2 mm
OpenPSX2AmigaPadAdapter
SukkoPera/OpenPSX2AmigaPadAdapter
Playstation to Commodore Amiga/CD32 Controller Adapter
43 parts69
4 layers38 × 38 mm
ReSDMAC
mbtaylor1982/ReSDMAC
Verilog code to replace the Commodore SDMAC found in the A3000
36 parts51CC-BY-SA-4.0
2 layers90 × 94 mm
Greaseweazle
tebl/Amiga-DrawBridge
A PCB build of Rob Smiths Amiga DrawBridge, an Arduino-based solution for reading and writing Amiga floppy disks on modern hardware. Also includes a version of Greaseweazle.
26 parts51
2 layers74.4 × 72.5 mm
OpenAmiga600FastRamExpansion
SukkoPera/OpenAmiga600FastRamExpansion
4 MB Fast RAM Expansion for the Commodore Amiga 600
27 parts47
2 layers41.3 × 51.8 mm
A500plus chipram expansion
blark/a500plus-chipram-expansion
A 1MB chip RAM expansion for the A500+
13 parts32
2 layers46.8 × 111 mm
A500hdd
AmigaPorts/a500hdd
Inexpensive A500 hard disk interface
108 parts28MPL-2.0
2 layers111.6 × 37.5 mm
OpenAmiga2000CoproAdapter
SukkoPera/OpenAmiga2000CoproAdapter
Move your Amiga 2000 CPU to the Coprocessor slot!
19 parts27
2 layers20.6 × 57.4 mm
Amiga Boot Selector
reinauer/Amiga-Boot-Selector
This is a Floppy Switcher for the Amiga 500/2000. It allows you to switch DF0/DF1, making it possible to boot from either a Gotek drive or the internal floppy drive. without relying on AmigaOS.
7 parts18
2 layers30.3 × 35.8 mm
AtkDongle
SukkoPera/AtkDongle
Troubleshoot parallel and serial ports on Amiga Computers
16 parts17
2 layers51.8 × 26.4 mm
OpenAmigaFourPlayerAdapter
SukkoPera/OpenAmigaFourPlayerAdapter
Connect up to four joysticks to your Amiga!
6 parts14
2 layers50 × 50 mm
PlipUltimate
tehKaiN/plipUltimate
Network interface & SD card reader for Classic Amigas
51 parts13GPL-2.0
2 layers125.7 × 33 mm
SRAM Board 2MB
kr239/A500-SRAM-Board
Replace the old 44256 DRAM chips on your A500 with newer SRAM memory
47 parts6GPL-2.0
2 layers66.1 × 17.8 mm
Paula Int Adapter
reinauer/Paula-Int-Adapter
Cheap "Action Replay" clone for Amiga 500/2000
7 parts4
2 layers64.3 × 14.5 mm
A1200
bodgit/A1200-HxC
Simple circuit to present the internal HxC buttons outside the A1200 case
8 parts2
2 layers90 × 94 mm
Amiga Drawbridge
tebl/Amiga-DrawBridge
A PCB build of Rob Smiths Amiga DrawBridge, an Arduino-based solution for reading and writing Amiga floppy disks on modern hardware. Also includes a version of Greaseweazle.
19 parts51
2 layers105.4 × 50.8 mm
SRAM Board
kr239/A500-SRAM-Board
Replace the old 44256 DRAM chips on your A500 with newer SRAM memory
15 parts6GPL-2.0