Boards by tomrodinger

22 boards

Open-source boards designed in KiCad by tomrodinger on GitHub, from 5 repositories. A board’s address here is its repository’s there.

2 layers98.9 × 91.4 mm
Coin Cell Tester
tomrodinger/servomotor
Open-source NEMA-17 integrated servomotor (motor + closed-loop driver + controller + encoder). RS-485, Python/Arduino libraries, MCP server for AI control. Hardware, firmware and software.
204 parts17MIT
2 layers81 × 38 mm
Air Conditioner Energy Saver V7
tomrodinger/air_conditioner_energy_saver
This are all the open sources for a device that automatically controls your AC unit to turn it on or off
74 parts
2 layers99 × 57.5 mm
BL706 Robot
tomrodinger/line_following_robot
The code for the line following robot that runs on BL702/BL706
105 partsApache-2.0
2 layers46.7 × 30.9 mm
Uw rs485 hat V5
tomrodinger/Raspberry_Pi_HAT_RS485
This is a Raspberry Pi HAT for RS485 communication with external devices and it should fit into any Raspberry Pi like Zero/Zero2W/3/4
54 partsApache-2.0
2 layers36.9 × 48.9 mm
RS485 Controller
tomrodinger/RS485_Controller
This integrates an ESP32-S3 module with an RS485 interface, so that it can be used to control Gearotons Servomotors or other RS485 devices
113 partsMIT
2 layers37.8 × 44.4 mm
Servomotor3
tomrodinger/servomotor
Open-source NEMA-17 integrated servomotor (motor + closed-loop driver + controller + encoder). RS-485, Python/Arduino libraries, MCP server for AI control. Hardware, firmware and software.
79 parts17MIT
2 layers38 × 44.6 mm
M3-V5
tomrodinger/servomotor
Open-source NEMA-17 integrated servomotor (motor + closed-loop driver + controller + encoder). RS-485, Python/Arduino libraries, MCP server for AI control. Hardware, firmware and software.
71 parts17MIT
2 layers46.7 × 87.5 mm
Servo motor
tomrodinger/servomotor
Open-source NEMA-17 integrated servomotor (motor + closed-loop driver + controller + encoder). RS-485, Python/Arduino libraries, MCP server for AI control. Hardware, firmware and software.
112 parts17MIT
2 layers39 × 56.4 mm
Servo motor
tomrodinger/servomotor
Open-source NEMA-17 integrated servomotor (motor + closed-loop driver + controller + encoder). RS-485, Python/Arduino libraries, MCP server for AI control. Hardware, firmware and software.
104 parts17MIT
2 layers38 × 56.5 mm
ServomotorStepper V2I1
tomrodinger/servomotor
Open-source NEMA-17 integrated servomotor (motor + closed-loop driver + controller + encoder). RS-485, Python/Arduino libraries, MCP server for AI control. Hardware, firmware and software.
70 parts17MIT
2 layers38 × 44.6 mm
Servomotor3
tomrodinger/servomotor
Open-source NEMA-17 integrated servomotor (motor + closed-loop driver + controller + encoder). RS-485, Python/Arduino libraries, MCP server for AI control. Hardware, firmware and software.
69 parts17MIT
2 layers77.5 × 38 mm
Air Conditioner Energy Saver V2
tomrodinger/air_conditioner_energy_saver
This are all the open sources for a device that automatically controls your AC unit to turn it on or off
66 parts
2 layers70 × 25 mm
Motion Sense
tomrodinger/air_conditioner_energy_saver
This are all the open sources for a device that automatically controls your AC unit to turn it on or off
65 parts
2 layers99 × 57.5 mm
BL702 Robot
tomrodinger/line_following_robot
The code for the line following robot that runs on BL702/BL706
72 partsApache-2.0
2 layers99 × 57.5 mm
BL706 Robot
tomrodinger/line_following_robot
The code for the line following robot that runs on BL702/BL706
83 partsApache-2.0
2 layers99 × 57.5 mm
BL706 Robot
tomrodinger/line_following_robot
The code for the line following robot that runs on BL702/BL706
85 partsApache-2.0
2 layers99 × 57.5 mm
BL706 Robot
tomrodinger/line_following_robot
The code for the line following robot that runs on BL702/BL706
103 partsApache-2.0
2 layers99 × 57.5 mm
BL706 Robot
tomrodinger/line_following_robot
The code for the line following robot that runs on BL702/BL706
105 partsApache-2.0
2 layers
BLE ANTENNA 2437 loop
tomrodinger/line_following_robot
The code for the line following robot that runs on BL702/BL706
5 partsApache-2.0
2 layers46.7 × 30.9 mm
Uw rs485 hat
tomrodinger/Raspberry_Pi_HAT_RS485
This is a Raspberry Pi HAT for RS485 communication with external devices and it should fit into any Raspberry Pi like Zero/Zero2W/3/4
48 partsApache-2.0
2 layers36.9 × 48.9 mm
RS485 Controller
tomrodinger/RS485_Controller
This integrates an ESP32-S3 module with an RS485 interface, so that it can be used to control Gearotons Servomotors or other RS485 devices
109 partsMIT
2 layers46.7 × 30.9 mm
V1 not completed
tomrodinger/RS485_Controller
This integrates an ESP32-S3 module with an RS485 interface, so that it can be used to control Gearotons Servomotors or other RS485 devices
64 partsMIT