
BL706 Robot
tomrodinger/line_following_robot
The code for the line following robot that runs on BL702/BL706

The code for the line following robot that runs on BL702/BL706
BL706 Robot is an open-source printed circuit board by tomrodinger, from the tomrodinger/line_following_robot repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 99 × 57.5 mm with 105 parts on 84 nets, routed with 855 tracks and 205 vias.
It is built around the TC8301, FM8002A and GL5516, with the SMF5.0CA, IR19-21C/TR8 and PT19-21B/L41/TR8 among its other parts. Its parts include 36 capacitors, 32 resistors, 8 diodes, 8 inductors and 4 ICs. It belongs with the robots and motor control boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | Capacitor_SMD:C_0402_1005Metric | C9, C13, C17, C24, C27, C29, C30, C31, C32 |
| 9 | 1K | Resistor_SMD:R_0402_1005Metric | R2, R3, R4, R5, R6, R10, R11, R12, R32 |
| 8 | 10K | Resistor_SMD:R_0402_1005Metric | R7, R8, R9, R17, R19, R22, R31, R33 |
| 8 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C2, C3, C5, C7, C8, C11, C16, C23 |
| 6 | 0R | Inductor_SMD:L_0603_1608Metric | L3, L4, L5, L6, L7, L8 |
| 5 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C12, C25, C26, C28 |
| 3 | 0R | Resistor_SMD:R_1206_3216Metric | R20, R28, R29 |
| 3 | 0R_BLM | Inductor_SMD:L_0603_1608Metric | FL1, FL2, FL3 |
| 3 | 10pF | Capacitor_SMD:C_0402_1005Metric | C10, C14, C19 |
| 2 | 12pF | Capacitor_SMD:C_0402_1005Metric | C15, C20 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C33, C34 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C21, C22 |
| 2 | 20K | Resistor_SMD:R_0402_1005Metric | R13, R14 |
| 2 | 47R | Resistor_SMD:R_0402_1005Metric | R15, R16 |
| 2 | Conn_01x02_Male | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | M1, M2 |
| 2 | GL5516 | OptoDevice:R_LDR_5.0x4.1mm_P3mm_Vertical | R18, R21 |
| 2 | LED | LED_THT:LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm | D3, D4 |
| 2 | LED_RGBA | USB A SMD PAD:FM-B2020RGBA-HG | D1, D2 |
| 2 | MountingHole | MountingHole:MountingHole_3mm | H1, H2 |
| 2 | SMF5.0CA | USES_Library:SOD-123FL | D6, D7 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_EVQPE1 | BOOT1, RST1 |
| 2 | TC8301 | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | U3, U4 |
| 1 | 0.39uF | Capacitor_SMD:C_0603_1608Metric | C18 |
| 1 | 0.6pf NP0 | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 1000uF | Capacitor_SMD:CP_Elec_8x10.5 | C35 |
| 1 | 100K | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 100R | Resistor_SMD:R_0805_2012Metric | R27 |
| 1 | 1nF | Capacitor_SMD:C_0402_1005Metric | C36 |
| 1 | 2.2uH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 2.5nH | Inductor_SMD:L_0402_1005Metric | L2 |
| 1 | 32MHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | 33R | Resistor_SMD:R_0402_1005Metric | R30 |
| 1 | 3R | Resistor_SMD:R_1206_3216Metric | R24 |
| 1 | 3k0 | Resistor_SMD:R_0402_1005Metric | R26 |
| 1 | 4.8pf NP0 | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 47K | Resistor_SMD:R_0402_1005Metric | R25 |
| 1 | Antenna_Loop | USB A SMD PAD:BLE_2437_LOOP_2 | AE1 |
| 1 | BL706C | Package_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.3x4.3mm | U1 |
| 1 | Battery | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | BT1 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | FM8002A | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | IR19-21C/TR8 | USES_Library:IR19-21C-TR8 | D8 |
| 1 | LOGO | 2023_03_22 | G*** |
| 1 | PT19-21B/L41/TR8 | USES_Library:XDCR_PT19-21B_L41_TR8 | Q2 |
| 1 | S8050 | Package_TO_SOT_SMD:SOT-23-3 | Q1 |
| 1 | Speaker | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | LS1 |
| 1 | ZM4728A | Diode_SMD:D_MELF | D5 |

tomrodinger/line_following_robot
The code for the line following robot that runs on BL702/BL706

tomrodinger/line_following_robot
The code for the line following robot that runs on BL702/BL706

tomrodinger/line_following_robot
The code for the line following robot that runs on BL702/BL706

tomrodinger/line_following_robot
The code for the line following robot that runs on BL702/BL706

tomrodinger/line_following_robot
The code for the line following robot that runs on BL702/BL706

tomrodinger/line_following_robot
The code for the line following robot that runs on BL702/BL706


ayuusweetfish/Canta-Cart
Low-cost card-sized musical instrument with touch keys

hackzone/cz20-badge
Node.js build static site for using with Hatchery over WebUSB


Boardoza/Boardoza_FM8002A_Audio_Amplifier_Module
Compact mono FM8002A-based audio amplifier module for portable and embedded speaker applications.



klaus-liebler/labathome
Der kleine Bruder von lab@home. Ermöglicht das Experimentieren mit PT1...PTn-Gliedern, die intern als RC-Kombination (entkoppelt über Operationsverstärker) ausgeführt sind.
It measures 99 × 57.5 mm and has 2 copper layers, 1.6 mm thick.
105 parts, built around the TC8301, FM8002A, GL5516 and SMF5.0CA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tomrodinger/line_following_robot repository on GitHub, at the commit this page was made from: the board is PCB/V10/version_with_old_antenna/BL706 Robot.kicad_pcb and its schematic PCB/V10/BL706 Robot.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).