4 layers100 × 100 mm
Labathome pcb
klaus-liebler/labathome
Der kleine Bruder von lab@home. Ermöglicht das Experimentieren mit PT1...PTn-Gliedern, die intern als RC-Kombination (entkoppelt über Operationsverstärker) ausgeführt sind.
292 parts5MIT
GL5516
森霸Extended
-30℃~+70℃ 0.5 150V 30ms 30ms 500kΩ 540nm 5kΩ~10kΩ 插件,P=3mm Photoresistors ROHS
- Part id
- senba-sensing-tech/GL5516
- Category
- Photoresistors
- Package
- 插件,P=3mm
- Pins
- 2
- In stock
- 31,873 at JLCPCB (C125626)
- Used on
- 14 open-source boards
Overview
The GL5516 is a photoresistor made by 森霸 in a 插件,P=3mm package with 2 pins. -30℃~+70℃ 0.5 150V 30ms 30ms 500kΩ 540nm 5kΩ~10kΩ 插件,P=3mm Photoresistors ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:GL5549, from EasyEDA) and its footprint (EasyEDA_Cloud:RES-TH_L5.1-W4.3-P3.40-D0.5, from EasyEDA), ready for a KiCad board. 31,873 are in stock at JLCPCB (part C125626). 14 open-source boards in 10 repositories on GitHub use it.
Symbol
Footprint
Pinout
2| Pin | Name | Type |
|---|---|---|
| 1 | 1 | Unspecified |
| 2 | 2 | Unspecified |
- 2 layers58 × 63 mm
Camping LightRelay
Rustaphor/LightRelay4Camping
Analog light sensor to night power up LED garland. For Camping use.
91 parts2GPL-3.0 - 2 layers89 × 76 mm
- 2 layers85.5 × 53.5 mm
Pcb final
jasper576/dual-axis-solar-tracker
This solar tracker automatically follows the sun using for LDR light sensors and two servo motors. It also measures voltage, current, and power using an INA219 sensor and shows all the information on a small OLED screen…
19 parts - 2 layers110 × 110 mm
- 2 layers68.6 × 53.3 mm
Shield
majkrzak/optikos
Aim of the project is to explore USB protocol and create simple UVC device using Atmega32U4 builtin stack.
58 parts - 4 layers76.8 × 26.3 mm
- 2 layers99 × 57.5 mm
BL706 Robot
tomrodinger/line_following_robot
The code for the line following robot that runs on BL702/BL706
105 partsApache-2.0
Parts like it
8
GL5528(10-20)
插件,P=3.4mm-30℃~+70℃ 0.65 150V 1MΩ 2.4mm 3.4mm 4.3mm 5.1mm 540nm 8kΩ~20kΩ 插件,P=3.4mm Photoresistors ROHSJCHLPhotoresistorsGL5516(5-10)
插件,P=3.4mm-30℃~+70℃ 0.6 150V 2.4mm 200kΩ 3.4mm 4.3mm 5.1mm 540nm 5kΩ~10kΩ 插件,P=3.4mm Photoresistors ROHSJCHLPhotoresistorsGL5528
插件,P=3mm-30℃~+70℃ 0.6 10kΩ~20kΩ 150V 1MΩ 30ms 30ms 540nm 插件,P=3mm Photoresistors ROHS森霸PhotoresistorsGL5537-1
插件,P=3mm-30℃~+70℃ 0.6 150V 20kΩ~30kΩ 20ms 2MΩ 30ms 540nm 插件,P=3mm Photoresistors ROHSSenba Sensing TechPhotoresistorsGL5539
插件,P=3mm-30℃~+70℃ 0.8 10MΩ 150V 20ms 30ms 50kΩ~100kΩ 540nm 插件,P=3mm Photoresistors ROHSSenba Sensing TechPhotoresistorsGL5537(20-30)
插件,P=3.4mm-30℃~+70℃ 0.7 150V 2.4mm 20kΩ~30kΩ 3.4mm 4.3mm 5.1mm 540nm 5MΩ 插件,P=3.4mm Photoresistors ROHSJCHLPhotoresistorsGL5539(40-50)
插件,P=3.4mm-30℃~+70℃ 0.7 10MΩ 150V 2.4mm 3.4mm 30kΩ~90kΩ 4.3mm 5.1mm 540nm 插件,P=3.4mm Photoresistors ROHSJCHLPhotoresistorsGL5549
插件,P=3mm-30℃~+70℃ 0.9 100kΩ~200kΩ 10MΩ 150V 20ms 30ms 540nm 插件,P=3mm Photoresistors ROHS森霸Photoresistors
Questions
Is there a KiCad symbol and footprint for the GL5516?
Yes. The symbol is EasyEDA_Cloud:GL5549 and the footprint EasyEDA_Cloud:RES-TH_L5.1-W4.3-P3.40-D0.5, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the GL5516?
插件,P=3mm, with 2 pins. Its footprint is drawn on this page.
Where is the GL5516 datasheet?
森霸 publishes it: the Datasheet link on this page opens it.
Where can I order the GL5516?
JLCPCB lists it as part C125626, with 31,873 in stock; the sellers' links on this page open their listings.
What can replace the GL5516?
Parts like it in the library: the GL5528(10-20) by JCHL, the GL5516(5-10) by JCHL, the GL5528 by 森霸 and the GL5537-1 by Senba Sensing Tech. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the GL5516?
14 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.