2 layers215 × 224 mm
2 layers100 × 110 mm
Cz badge hardware
hackzone/cz20-badge13Node.js build static site for using with Hatchery over WebUSB
- Size
- 100 × 110 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 185
- Nets
- 196
- Pads
- 632
- Tracks, vias
- 2,200, 473
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Jan 2020
- Updated
- 13 Dec 2024
Overview
Cz badge hardware is an open-source printed circuit board by hackzone, from the hackzone/cz20-badge repository on GitHub. It is a 2-layer board of 100 × 110 mm with 185 parts on 196 nets, routed with 2,200 tracks and 473 vias.
It is built around the ESP32-WROOM-32D, SM16106SC and FM8002A, with the TM8211, HX9193-33GB and 1N4148W among its other parts. Its parts include 49 resistors, 37 diodes, 30 capacitors, 17 switches and 12 ICs. It belongs with the lEDs and displays boards and the ESP32 and STM32 boards of this library.
Main components
7
ESP32-WROOM-32D
-- WiFi Modules ROHSEspressif SystemsWiFi Modules
SM16106SC
QSOP-24QSOP-24 LED Drivers ROHSShenzhen Sunmoon MicroLED Drivers
FM8002A
SOP-8-40℃~+85℃ 0.2% 1-Channel 2.5V~5.5V 2Wx1@4Ω 4.4mA 63dB Automatic mute/no-noise switch、Enable/shutdown function、Analog voltage gain SOP-8 Audio Amplifiers ROHSFMAudio Amplifiers
TM8211
SOIC-8-40℃~+85℃ 16 2 3V~8V 7mA Serial Voltage Buffer SOIC-8 Digital to Analog Converters (DAC) ROHSTMDigital To Analog Converters (DAC)
HX9193-33GB
SOT-23-5-40℃~+125℃@(Tj) 1 100uVrms 130uA 3.3V 480mV@(600mA) 600mA 65dB@(1kHz) 6V Fixed Over Current Protection、Thermal shutdown、Enable control、Output discharge Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHXLinear Voltage Regulators (LDO)
1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching Diodes
SS24
SMA(DO-214AC)-55℃~+150℃ 200uA@40V 2A 40V 50A 550mV@2A Independent SMA(DO-214AC) Schottky Diodes ROHShongjiachengSchottky Diodes
README
README.mdcz20-badge
Event badge for CampZone 2020
firmware-STM32
bootloader-STM32
Use STM32CubeIDE
firmware-ESP32
See badgeteam/ESP32-platform-firmware and docs.badge.team
WebUSB site
Node.js build static site for using with Hatchery over WebUSB
Parts
185| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R10, R14, R16, R17, R18, R21, R22, R25, R27, R29, R31, R32 +6 |
| 16 | 1N4148W | Diode_SMD:D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16 |
| 16 | LL-R3528RGBC-008-B | LED_SMD:LED_Cree-PLCC4_3.2x2.8mm_CCW | D35, D36, D37, D38, D39, D40, D41, D42, D43, D44, D45, D46, D47, D48, D49, D50 |
| 12 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2, C4, C6, C11, C14, C19, C20, C21, C23, C28, C29, C30 |
| 9 | SW_Push | silicone_key_contact:silicone_key_contact | SW1, SW3, SW4, SW5, SW7, SW9, SW11, SW13, SW15 |
| 9 | TestPoint_Small | TestPoint:TestPoint_Pad_D1.5mm | TP8, TP9, TP10, TP11, TP12, TP13, TP14, TP15, TP16 |
| 7 | SW_Push | silicone_key_contact:silicone_key_contact_mirrored | SW2, SW6, SW8, SW10, SW12, SW14, SW16 |
| 6 | 1uF | Capacitor_SMD:C_0603_1608Metric | C5, C7, C12, C13, C16, C22 |
| 6 | 5k1 | Resistor_SMD:R_0603_1608Metric | R13, R15, R19, R20, R23, R24 |
| 6 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP3, TP4, TP5, TP6, TP7 |
| 6 | dnp/10k | Resistor_SMD:R_0603_1608Metric | R47, R48, R49, R50, R52, R53 |
| 4 | 1k2 | Resistor_SMD:R_0603_1608Metric | R5, R7, R8, R9 |
| 4 | dnp/AO3400 (A09T) | Package_TO_SOT_SMD:SOT-23 | Q9, Q11, Q13, Q14 |
| 3 | 100uF | Capacitor_SMD:CP_Elec_5x5.4 | C17, C24, C25 |
| 3 | 750 | Resistor_SMD:R_0603_1608Metric | R6, R11, R26 |
| 3 | SM16106 | Package_SO:QSOP-24_3.9x8.7mm_P0.635mm | U9, U10, U11 |
| 3 | dnp | Resistor_SMD:R_0603_1608Metric | R30, R56, R58 |
| 2 | 0.39uF | Capacitor_SMD:C_0603_1608Metric | C8, C9 |
| 2 | 20pF | Capacitor_SMD:C_0603_1608Metric | C1, C18 |
| 2 | FM8002A | Package_SO:SSOP-8_3.9x5.05mm_P1.27mm | U4, U6 |
| 2 | dnp/1uF | Capacitor_SMD:C_0603_1608Metric | C26, C27 |
| 2 | dnp/AO3401A | Package_TO_SOT_SMD:SOT-23 | Q10, Q12 |
| 1 | 10 | Resistor_SMD:R_0603_1608Metric | R28 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 47uF | Capacitor_SMD:C_0805_2012Metric | C10 |
| 1 | BLUE | LED_SMD:LED_0603_1608Metric | D33 |
| 1 | Conn_01x01_Male | buttons:arrow_left | J3 |
| 1 | Conn_01x01_Male | buttons:check | J11 |
| 1 | Conn_01x01_Male | buttons:arrow_right | J4 |
| 1 | Conn_01x01_Male | buttons:home | J9 |
| 1 | Conn_01x01_Male | buttons:cross | J10 |
| 1 | Conn_01x08 | lcsc:FFC-SMD_8P-P1.00_FFC10028-08SBD224K6M | J7 |
| 1 | ESP32-WROOM-32D | esp32-wrover:XCVR_ESP32-WROVER | U2 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric | D34 |
| 1 | HX9193-33GB | Package_TO_SOT_SMD:SOT-23-5 | U8 |
| 1 | LOGO | hackzone:hackzone | G*** |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Wuerth_693072010801 | J2 |
| 1 | Nrst | TestPoint:TestPoint_Pad_D1.5mm | TP2 |
| 1 | PROG | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J6 |
| 1 | SS24 | Diode_SMD:D_SMA | D19 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U7 |
| 1 | TM8211 | Package_SO:SSOP-8_3.9x5.05mm_P1.27mm | U5 |
| 1 | USB_C_Receptacle | Connector_USB:USB_C_Receptacle_China_SMT | J1 |
| 1 | dnp | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | dnp/0 | Resistor_SMD:R_0603_1608Metric | R57 |
| 1 | dnp/100nF | Capacitor_SMD:C_0603_1608Metric | C15 |
| 1 | dnp/1k | Resistor_SMD:R_0603_1608Metric | R55 |
| 1 | dnp/1k2 | Resistor_SMD:R_0603_1608Metric | R51 |
| 1 | dnp/470 | Resistor_SMD:R_0603_1608Metric | R54 |
| 1 | dnp/BATT | Connector_JST:JST_PH_B3B-PH-SM4-TB_1x03-1MP_P2.00mm_Vertical | J8 |
| 1 | dnp/DW-01 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | dnp/GREEN | LED_SMD:LED_0603_1608Metric | D18 |
| 1 | dnp/HX9193-33GB | Package_TO_SOT_SMD:SOT-23-5 | U12 |
| 1 | dnp/RED | LED_SMD:LED_0603_1608Metric | D17 |
| 1 | dnp/SW_SPDT | switch:sk-3296s | SW17 |
| 1 | dnp/TP4056 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U1 |
The 179 most common of 185 parts.
More from hackzone/cz20-badge
2- 2 layers100 × 40 mm
Speaker grill
hackzone/cz20-badge
Node.js build static site for using with Hatchery over WebUSB
7 parts13
Similar boards
- 2 layers85.6 × 54 mm
Canta
ayuusweetfish/Canta-Cart
Low-cost card-sized musical instrument with touch keys
43 parts16CERN-OHL-S-2.0 - 4 layers192 × 48 mm
- 2 layers150 × 50 mm
- 4 layers101.8 × 50 mm
China lcsc undoc parts test
ArcaneNibble/china-lcsc-undoc-parts-test
Test some China / LCSC parts
103 parts0BSD - 4 layers88 × 54 mm
Defcon badge
LastZactionHero/defcon-silent-disco
RP2040-based DEF CON silent disco badge — KiCad project + tooling
82 parts - 2 layers114.3 × 42.9 mm
- 4 layers50 × 59 mm
- 2 layers178 × 80 mm
Panel 1x5
flummer/dmm-sao
A small digital multimeter specifically for measuring SAO related stuff
326 parts28CC-BY-SA-4.0
Questions
How big is the Cz badge hardware PCB?
It measures 100 × 110 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Cz badge hardware use?
185 parts, built around the ESP32-WROOM-32D, SM16106SC, FM8002A and TM8211. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cz badge hardware KiCad files?
From the hackzone/cz20-badge repository on GitHub, at the commit this page was made from: the board is hardware/cz-badge-hardware.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cz badge hardware design in my own project?
Its repository states no licence, so its author keeps all rights: ask hackzone before reusing the design.