Skip to the content
2 layers114.3 × 42.9 mmWatch conn, the printed circuit board in 3D

PCBs i designed

Size
114.3 × 42.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
53
Nets
57
Pads
239
Tracks, vias
545, 64
Pours
24
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
17 Aug 2026
Updated
17 Aug 2026

Overview

Watch conn is an open-source printed circuit board by Sanjog34, from the Sanjog34/PCB-designs repository on GitHub. It is a 2-layer board of 114.3 × 42.9 mm with 53 parts on 57 nets, routed with 545 tracks and 64 vias.

It is built around the ESP32-WROOM-32E-N8R2, CH340G and NS4160, with the TM8211, YTC-TC16S-26 and AP3404 among its other parts. Its parts include 28 capacitors, 10 resistors, 6 ICs, 3 transistors and 3 connectors. It belongs with the wearables boards and the ESP32 boards of this library.

Main components

8

README

README.md

PCB-designs

PCBs i designed

  1. Micromouse_Nano: PCB designed for a line-maze-solving micromouse, featuring an Arduino Nano, L293D motor driver, QTR-8 sensor array, and two N20 motors.
  2. Camera Setup Device: A compact handheld device designed during my internship at Yarsa Tech to test and verify the functionality of camera modules.
  3. CH334F Board: A UART hub PCB based on the CH334F, integrating four CH340 USB-to-UART converters and a USB Type-C interface.
  4. Watch_Conn: An ESP32-based smartwatch PCB featuring a display, SD card slot, DAC, and audio amplifier for speaker output.

Parts

53
QtyValueFootprintReferences
8100nFCapacitor_SMD:C_0805_2012MetricC1, C5, C7, C9, C10, C14, C16, C29
633pFCapacitor_SMD:C_0805_2012MetricC3, C11, C15, C24, C25, C28
310KResistor_SMD:R_0603_1608MetricR1, R5, R7
310uFCapacitor_SMD:C_0805_2012MetricC4, C12, C13
210RResistor_SMD:R_0603_1608MetricR2, R6
210pFCapacitor_SMD:C_0805_2012MetricC26, C27
21uFCapacitor_SMD:C_0805_2012MetricC8, C30
25k1Resistor_SMD:R_0603_1608MetricR8, R9
2AP3404easyeda2kicad:SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BRQ2, Q3
2BLM18EG471SN1Deasyeda2kicad:L0603FB1, FB2
1100nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC19
1100uFCapacitor_SMD:CP_Elec_6.3x5.4C17
1150KResistor_SMD:R_0603_1608MetricR3
118nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC22
11uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC23
122uFCapacitor_SMD:C_0805_2012MetricC6
12K2Resistor_SMD:R_0603_1608MetricR4
133pFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC18
1470uFCapacitor_SMD:CP_Elec_6.3x7.7C2
162KResistor_SMD:R_0603_1608MetricR11
1CH340Geasyeda2kicad:SOIC-16_L9.9-W3.9-P1.27-LS6.0-BLU2
1Conn_01x02_PinConnector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_VerticalJ6
1Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1
1ESP32-WROOM-32E-N8R2easyeda2kicad:WIFI-SMD_ESP32-WROOM-32EU1
1HT78XX-Aeasyeda2kicad:SOT-89_L4.5-W2.5-P1.50-LS4.2-BRU3
1MMBT3904Package_TO_SOT_SMD:SOT-23Q1
1NS4160easyeda2kicad:ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP2.0U6
1TF-02A_C2889261easyeda2kicad:TF-SMD_TF-02Card1
1TM8211easyeda2kicad:SOIC-8_L5.0-W4.0-P1.27-LS6.0-BLU4
1YTC-TC16S-26easyeda2kicad:USB-C-SMD_YTC-TC16S-26-AU5
1YXT-BB10-24P-02easyeda2kicad:CONN-SMD_24P-P0.4-YXT-BB10-24P-02CN1

More from Sanjog34/PCB-designs

3
  • 2 layers84.9 × 77.8 mmCamerasetup, the printed circuit board in 3D

    Camerasetup

    Sanjog34/PCB-designs

    PCBs i designed

    51 parts
  • 2 layers66 × 61.3 mmCH334F, the printed circuit board in 3D

    CH334F

    Sanjog34/PCB-designs

    PCBs i designed

    42 parts
  • 2 layers57.1 × 30.4 mmCamerapcb, the printed circuit board in 3D

    Camerapcb

    Sanjog34/PCB-designs

    PCBs i designed

    12 parts

Similar boards

  • 2 layers128.7 × 60.3 mmMOBILE, the printed circuit board in 3D

    MOBILE

    sumit123hub/Mobile-PCB-Files-

    I always dreamed of building my own mobile system. This repo documents my journey designing a custom ESP32 PCB featuring a GSM module, display interface, and complete Battery Management System (BMS).

    92 parts
  • 2 layers82 × 58 mmNoirShot, the printed circuit board in 3D

    NoirShot

    rabinniroula/NoirShot

    instant thermal camera

    50 parts2
  • 4 layers97 × 97 mmPCBA ZONA TOUCH, the printed circuit board in 3D

    PCBA ZONA TOUCH

    intechstudio/grid-hardware

    29 parts59GPL-3.0
  • 2 layers64.7 × 75.1 mmCh32-dev board, the printed circuit board in 3D

    Ch32-dev board

    rabinniroula/CH32V203C8T6-devkit

    Homebrew devkit PCB for the WCH-CH32V203C8T6 MCU

    37 parts
  • 2 layers52.8 × 55 mmILDAWaveX16, the printed circuit board in 3D

    ILDAWaveX16

    stanleyondrus/ILDAWaveX16

    ILDAWaveX16 is an open-source, high-resolution, wireless laser DAC with SD-card playback, network control, and ILDA output.

    95 parts42
  • 4 layers131 × 78.5 mmRpiPico Agriboard, the printed circuit board in 3D

    RpiPico Agriboard

    R-Mutura/ANGAZA_ELIMU_PCB

    ANGAZA_ELIMU_PCB

    221 parts2
  • 2 layers80 × 40 mmCryptick token pcb, the printed circuit board in 3D

    Cryptick token pcb

    alphaseneca/cryptick-token-pcb

    Hardware schematics, 2-layer PCB layout, and manufacturing files for Cryptick Token — the 100% open-source biometric hardware security key and cryptographic hardware enclave.

    56 partsMIT
  • 2 layers150 × 50 mmEsp32-led smps, the printed circuit board in 3D

    Esp32-led smps

    lucysrausch/esp32-led-smps

    230V main LED smps. 2x30W Constant Current.

    179 parts30

Questions

How big is the Watch conn PCB?

It measures 114.3 × 42.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Watch conn use?

53 parts, built around the ESP32-WROOM-32E-N8R2, CH340G, NS4160 and TM8211. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Watch conn KiCad files?

From the Sanjog34/PCB-designs repository on GitHub, at the commit this page was made from: the board is watch_conn/watch_conn.kicad_pcb and its schematic CH334F/CH334F.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Watch conn design in my own project?

Its repository states no licence, so its author keeps all rights: ask Sanjog34 before reusing the design.