
STE25
stonedDiscord/Automatenplatinen
Reverse engineerte Hardware aus deutschen Spielautomaten.

Reverse engineerte Hardware aus deutschen Spielautomaten.
Programmierboard is an open-source printed circuit board by stonedDiscord, from the stonedDiscord/Automatenplatinen repository on GitHub, published under the BSD-2-Clause licence. It is a 2-layer board of 179 × 99.5 mm with 49 parts on 100 nets, routed with 359 tracks and 3 vias.
It is built around the AT89C2051-12PU, MAX202ID and L7805, with the BC327 among its other parts. Its parts include 13 capacitors, 11 resistors, 7 diodes, 5 connectors and 3 ICs. It belongs with the 8051 (CH55x, STC, AT89) boards of this library.
graph RL
at[ATMega48] -->|BDM| cpu[CPU<br/>MC68331]
at --> rtc[Uhr<br/>RTC-4543]| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | C | Capacitor_THT:C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C1, C2, C5, C6, C7, C8, C9, C10 |
| 6 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1, H2, H3, H4, H5, H6 |
| 6 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R7, R8, R15, R17, R18 |
| 3 | 1 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R4 |
| 3 | D | Diode_THT:D_A-405_P10.16mm_Horizontal | D10, D11, D12 |
| 2 | 120 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R16, R19 |
| 2 | BC327 | Package_TO_SOT_THT:TO-92 | Q1, Q2 |
| 2 | C | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C11, C12 |
| 2 | C_Polarized | Capacitor_THT:CP_Axial_L21.0mm_D8.0mm_P28.00mm_Horizontal | C3, C4 |
| 2 | D | Diode_THT:D_DO-15_P15.24mm_Horizontal | D1, D2 |
| 2 | DIN41612_03x10_ABC | Connector_DIN:DIN41612_C3_3x10_Female_Vertical_THT | J9, J10 |
| 1 | AT89C2051-12P | Package_DIP:DIP-20_W7.62mm | U1 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_SwitchcraftConxall_RAPC10U_Horizontal | J1 |
| 1 | C | Capacitor_THT:CP_Radial_Tantal_D4.5mm_P2.50mm | C13 |
| 1 | Conn_01x02_Socket | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J8 |
| 1 | Crystal | Crystal:Crystal_HC18-U_Vertical | Y1 |
| 1 | DE9_Plug_MountingHoles | Connector_Dsub:DSUB-9_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm | J5 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U99 |
| 1 | LED_Dual_AAK | LED_THT:LED_D5.0mm-3 | D99 |
| 1 | MAX202 | Package_DIP:DIP-16_W7.62mm | U2 |
| 1 | POWER | LED_THT:LED_D5.0mm | D5 |
| 1 | SW_SPDT | Button_Switch_THT:SW_E-Switch_EG1224_SPDT_Angled | SW1 |

stonedDiscord/Automatenplatinen
Reverse engineerte Hardware aus deutschen Spielautomaten.

stonedDiscord/Automatenplatinen
Reverse engineerte Hardware aus deutschen Spielautomaten.

stonedDiscord/Automatenplatinen
Reverse engineerte Hardware aus deutschen Spielautomaten.

stonedDiscord/Automatenplatinen
Reverse engineerte Hardware aus deutschen Spielautomaten.

stonedDiscord/Automatenplatinen
Reverse engineerte Hardware aus deutschen Spielautomaten.

stonedDiscord/Automatenplatinen
Reverse engineerte Hardware aus deutschen Spielautomaten.

stonedDiscord/Automatenplatinen
Reverse engineerte Hardware aus deutschen Spielautomaten.

stonedDiscord/Automatenplatinen
Reverse engineerte Hardware aus deutschen Spielautomaten.

stonedDiscord/Automatenplatinen
Reverse engineerte Hardware aus deutschen Spielautomaten.

stonedDiscord/Automatenplatinen
Reverse engineerte Hardware aus deutschen Spielautomaten.

stonedDiscord/Automatenplatinen
Reverse engineerte Hardware aus deutschen Spielautomaten.

stonedDiscord/Automatenplatinen
Reverse engineerte Hardware aus deutschen Spielautomaten.

trwgQ26xxx/FLT_ART_CU1_Multicart
Multicart for Fiat Lancia Tester\Alfa Romeo Tester\Check Up 1



phastmike/neutec-repeater-hardware
Contains KiCad files for the Neutec Repeater Project. Firmware is on a different repository

skiselev/zeta_sbc
Zeta SBC is an Zilog Z80 based single board computer. It is inspired by Ampro Little Board Z80 and N8VEM project. Zeta SBC is software compatible with RomWBW Firmware


rasterizednet/raspberry-pi-estim
This repo includes kicad projects for the raspbi controller, and estim breakout, as well as the AVR source code for the estim breakout.

It measures 179 × 99.5 mm and has 2 copper layers, 1.6 mm thick.
49 parts, built around the AT89C2051-12PU, MAX202ID, L7805 and BC327. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the stonedDiscord/Automatenplatinen repository on GitHub, at the commit this page was made from: the board is Programmierboard/Programmierboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the BSD-2-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).