2 layers170.2 × 100 mm
Z80-SBC
skiselev/zeta_sbc
Zeta SBC is an Zilog Z80 based single board computer. It is inspired by Ampro Little Board Z80 and N8VEM project. Zeta SBC is software compatible with RomWBW Firmware
75 parts53GPL-3.0
MAX202ID
Texas InstrumentsExtended
-40℃~+85℃ 120Kbps 2 2 4.5V~5.5V 8mA Transceiver Yes ±15kV SOIC-16 RS232 ICs ROHS
- Part id
- ti/MAX202ID
- Category
- RS232 ICs
- Package
- SOIC-16
- Pins
- 16
- In stock
- 1,335 at JLCPCB (C544537)
- Used on
- 16 open-source boards
Overview
The MAX202ID is a RS232 IC made by Texas Instruments in a SOIC-16 package with 16 pins. -40℃~+85℃ 120Kbps 2 2 4.5V~5.5V 8mA Transceiver Yes ±15kV SOIC-16 RS232 ICs ROHS.
PCBKit's library has its KiCad symbol (Interface_UART:MAX202, from KiCad's library) and its footprint (Package_SO:SOIC-16_3.9x9.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 1,335 are in stock at JLCPCB (part C544537). 16 open-source boards in 13 repositories on GitHub use it.
Symbol
Footprint
Pinout
16| Pin | Name | Type |
|---|---|---|
| 1 | C1+ | Passive |
| 2 | VS+ | Power out |
| 3 | C1- | Passive |
| 4 | C2+ | Passive |
| 5 | C2- | Passive |
| 6 | VS- | Power out |
| 7 | T2OUT | Output |
| 8 | R2IN | Input |
| 9 | R2OUT | Output |
| 10 | T2IN | Input |
| 11 | T1IN | Input |
| 12 | R1OUT | Output |
| 13 | R1IN | Input |
| 14 | T1OUT | Output |
| 15 | GND | Power in |
| 16 | VCC | Power in |
- 4 layers340 × 210 mm
- 2 layers111.1 × 47.1 mm
Raspbi estim controller
rasterizednet/raspberry-pi-estim
This repo includes kicad projects for the raspbi controller, and estim breakout, as well as the AVR source code for the estim breakout.
63 parts5CC0-1.0 - 2 layers180.3 × 120.6 mm
- 2 layers60.2 × 80.8 mm
- 2 layers165.1 × 66 mm
Selector8x16
DavidMFlynn/VideoSelector
Sets camera to monitor connections, RS-232, Extron Electronics MAV 88, PIC16F1847.
113 parts1GPL-3.0 - 2 layers55.9 × 38.1 mm
- 2 layers40 × 31 mm
Parts like it
8
SP3232EEN-L/TR
SOIC-16-40℃~+85℃ 2 2 235Kbps 3V~5.5V Transceiver SOIC-16 RS232 ICs ROHSMaxLinearRS232 ICsSP3232EEN(UMW)
SOP-16-40℃~+105℃ 2 2 250Kbps 3V~5.5V 3mA Transceiver Yes ±8kV SOP-16 RS232 ICs ROHSUMWRS232 ICsMAX3232EID
SOIC-16-40℃~+85℃ 0.3mA 2 2 250Kbps 3V~5.5V Transceiver Yes ±15kV SOIC-16 RS232 ICs ROHSTexas InstrumentsRS232 ICsMAX3232ESE(UMW)
SOP-16-40℃~+105℃ 1mA 2 2 250Kbps 3V~3.6V、4.5V~5.5V Transceiver Yes ±8kV SOP-16 RS232 ICs ROHSUMWRS232 ICsSP232EEN-L/TR
SOIC-16-40℃~+85℃ 2 2 240Kbps 4.5V~5.5V Transceiver Yes ±15kV SOIC-16 RS232 ICs ROHSMaxLinearRS232 ICsUT3232G-S16-R
SOP-162 2 250Kbps 3V~5.5V Transceiver SOP-16 RS232 ICs ROHSUTCRS232 ICsMAX3232CD
SOIC-160.3mA 0℃~+70℃ 2 2 250Kbps 3.3V~5.5V Transceiver Yes ±15kV SOP-16-150mil RS232 ICs ROHSTexas InstrumentsRS232 ICsGM3232ESA
SOP-16-40℃~+85℃ 0.3mA 2 2 3V~3.6V、4.5V~5.5V 500Kbps Transceiver Yes ±15kV SOP-16 RS232 ICs ROHSGATEMODERS232 ICs
Questions
Is there a KiCad symbol and footprint for the MAX202ID?
Yes. The symbol is Interface_UART:MAX202 and the footprint Package_SO:SOIC-16_3.9x9.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the MAX202ID?
SOIC-16, with 16 pins. Its footprint is drawn on this page.
Where is the MAX202ID datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the MAX202ID?
JLCPCB lists it as part C544537, with 1,335 in stock; the sellers' links on this page open their listings.
What can replace the MAX202ID?
Parts like it in the library: the SP3232EEN-L/TR by MaxLinear, the SP3232EEN(UMW) by UMW, the MAX3232EID by Texas Instruments and the MAX3232ESE(UMW) by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the MAX202ID?
16 boards in 13 repositories on GitHub; the most starred are listed on this page, with their KiCad files.