2 layers64 × 30 mm
Estim breakout
rasterizednet/raspberry-pi-estim
This repo includes kicad projects for the raspbi controller, and estim breakout, as well as the AVR source code for the estim breakout.
49 parts5CC0-1.0
2 layers111.1 × 47.1 mm
Raspbi estim controller
rasterizednet/raspberry-pi-estim5This repo includes kicad projects for the raspbi controller, and estim breakout, as well as the AVR source code for the estim breakout.
- Size
- 111.1 × 47.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 63
- Nets
- 49
- Pads
- 261
- Tracks, vias
- 520, 44
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Feb 2020
- Updated
- 22 Feb 2020
Overview
Raspbi estim controller is an open-source printed circuit board by rasterizednet, from the rasterizednet/raspberry-pi-estim repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 111.1 × 47.1 mm with 63 parts on 49 nets, routed with 520 tracks and 44 vias.
It is built around the MAX202ID, BD9C401EFJ-E2 and MAX11607EUA, with the BSS138 and RJ45 among its other parts. Its parts include 21 resistors, 20 capacitors, 6 connectors, 5 ICs and 4 transistors.
Main components
5
MAX202ID
SOIC-16-40℃~+85℃ 120Kbps 2 2 4.5V~5.5V 8mA Transceiver Yes ±15kV SOIC-16 RS232 ICs ROHSTexas InstrumentsRS232 ICs
BD9C401EFJ-E2
SOIC-8-40℃~+85℃ 1 1.5mA 3.3V 4.5V~18V 4A 500kHz Adjustable Buck Buck Built-in Yes SOIC-8 DC-DC Converters ROHSROHM SemiconductorDC-DC Converters
MAX11607EUA
MSOP82.7V to 3.6V Low-Power, 4-Channel, I2C, 10-Bit ADCs in Ultra-Small PackageMaxim Integrated (Analog Devices)Uncategorised
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
RJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorised
README
README.mdRaspberry Pi Estim
This repo includes kicad projects for the raspbi controller, and estim breakout, as well as the AVR source code for the estim breakout.
This is an untested prototype. More information can be found at Schnizel Wolf: Raspberry PI Estim Breakout
Feel free to post ideas and recommendations on the Issue Board.
LICENSE
CC0 1.0 Universal
Parts
63| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10K | Resistor_SMD:R_0402_1005Metric | R5, R9, R36, R38, R39, R40, R41, R42, R43, R44, R45 |
| 4 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C2, C3, C16, C18 |
| 4 | 1uF | Capacitor_SMD:C_0402_1005Metric | C17, C19, C20, C21 |
| 4 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q7, Q8, Q9, Q10 |
| 2 | 1000uF | Capacitor_SMD:CP_Elec_10x12.5 | C4, C5 |
| 2 | 100K | Resistor_SMD:R_0402_1005Metric | R7, R34 |
| 2 | 22uF 16V | Capacitor_SMD:C_0805_2012Metric | C11, C13 |
| 2 | 583-FM4004W-W | mk312-smd-footprints:DO-214AC | D1, D2 |
| 1 | +12V Battery | Connector_Wire:SolderWirePad_1x02_P3.81mm_Drill0.8mm | J2 |
| 1 | 0.1uF 50VDC | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 100K | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | 105K | Resistor_SMD:R_0603_1608Metric | R37 |
| 1 | 10nF 50V | Capacitor_SMD:C_0603_1608Metric | C12 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 10uF 25VDC | Capacitor_SMD:C_1206_3216Metric | C7 |
| 1 | 10uF 35V | Capacitor_SMD:C_1210_3225Metric | C6 |
| 1 | 12K | Resistor_SMD:R_0603_1608Metric | R35 |
| 1 | 15K | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 15uH 2.4A | Inductor_SMD:L_Taiyo-Yuden_NR-80xx | L1 |
| 1 | 1A Polyfuse | Fuse:Fuse_2920_7451Metric | F1 |
| 1 | 2.2nF 6.3V | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 22uF 10V | Capacitor_SMD:C_1210_3225Metric | C15 |
| 1 | 28.7K 1/16W 1% | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 33K | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 4.7uH | mk312-smd-footprints:SRN5040TA4R7M | L2 |
| 1 | 4700pF | Capacitor_SMD:C_0402_1005Metric | C10 |
| 1 | 6.8K | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 7.87K | Resistor_SMD:R_1206_3216Metric | R3 |
| 1 | ACT4060ASH-T | Package_SO:SOP-8_3.76x4.96mm_P1.27mm | U1 |
| 1 | B340C/40V, 3A, SMB | Diode_SMD:D_SMC | D3 |
| 1 | BD9C401EFJ-E2 | Package_SO:HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.4x3.2mm | U5 |
| 1 | Barrel_Jack_MountingPin | mk312-smd-footprints:DJ_Jack_PJ-003A | J1 |
| 1 | Conn_01x12_Male | mk312-smd-footprints:estim_breakout | J8 |
| 1 | Conn_01x26_Male | Connector_PinHeader_2.54mm:PinHeader_2x13_P2.54mm_Vertical | J5 |
| 1 | LD29300P2MTR | mk312-smd-footprints:LD29300P2MTR | IC1 |
| 1 | MAX11607EUA | Package_SO:MSOP-8_3x3mm_P0.65mm | U2 |
| 1 | MAX202 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U3 |
| 1 | POWER | mk312-smd-footprints:SW_E-Switch-LC-1258 | S1 |
| 1 | RJ45 | Connector_RJ:RJ45_OST_PJ012-8P8CX_Vertical | J4 |
| 1 | Raspberry_Pi_2_3 | Module:Raspberry_Pi_Zero_Socketed_THT_FaceDown_MountingHoles | J3 |
More from rasterizednet/raspberry-pi-estim
1Similar boards
- 4 layers174 × 71 mm
DrinkMix CM4 Prototype
wbsipz/hardware-design-portfolio
Hardware design portfolio featuring power electronics, embedded control, and PCB projects.
134 parts - 2 layers165.1 × 66 mm
Selector8x16
DavidMFlynn/VideoSelector
Sets camera to monitor connections, RS-232, Extron Electronics MAV 88, PIC16F1847.
113 parts1GPL-3.0 - 2 layers170.2 × 100 mm
Z80-SBC
skiselev/zeta_sbc
Zeta SBC is an Zilog Z80 based single board computer. It is inspired by Ampro Little Board Z80 and N8VEM project. Zeta SBC is software compatible with RomWBW Firmware
75 parts53GPL-3.0 - 4 layers340 × 210 mm
- 2 layers180.3 × 120.6 mm
- 2 layers60.2 × 80.8 mm
- 2 layers55.9 × 38.1 mm
- 2 layers179 × 99.5 mm
Programmierboard
stonedDiscord/Automatenplatinen
Reverse engineerte Hardware aus deutschen Spielautomaten.
49 parts5BSD-2-Clause
Questions
How big is the Raspbi estim controller PCB?
It measures 111.1 × 47.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Raspbi estim controller use?
63 parts, built around the MAX202ID, BD9C401EFJ-E2, MAX11607EUA and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Raspbi estim controller KiCad files?
From the rasterizednet/raspberry-pi-estim repository on GitHub, at the commit this page was made from: the board is kicad_controller/raspbi_estim_controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Raspbi estim controller design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).