Skip to the content

Boards by sporniket

7 boards

Open-source boards designed in KiCad by sporniket on GitHub, from 6 repositories. A board’s address here is its repository’s there.

  • 4 layers440 × 252 mmMotherboard, the printed circuit board in 3D

    Motherboard

    sporniket/kicad-conversions--atari-ste-motherboard--c300780-001

    A conversion to Kicad EDA of the schematics of a computer released around 1989 known as the "Atari STE".

    576 parts35CC0-1.0
  • 2 layers444.3 × 203.2 mmMotherboard, the printed circuit board in 3D

    Motherboard

    sporniket/kicad-conversions--atari-260-520-st-motherboard--c070231

    A conversion into kicad of the Atari 260/520 ST

    352 parts12CC0-1.0
  • 2 layers283 × 177.5 mmUC-50-001, the printed circuit board in 3D

    UC-50-001

    sporniket/kicad-conversions--thomson-mo5--v1

    A conversion to Kicad EDA of the schematics of a computer released around 1984 known as the "Thomson MO5".

    225 parts7CC0-1.0
  • 4 layers33 × 33 mmMo5-ga motorola repl--atf1508, the printed circuit board in 3D

    Mo5-ga motorola repl--atf1508

    sporniket/thomson-mo5--gate-array-motorola--replacement-hw--atf1508

    Hardware project to replace the original Motorola Gate Array of the Thomson MO5 8-bit computer, using an ATF1508 CPLD.

    15 parts1CC0-1.0
  • 2 layers88.9 × 88.9 mmTestbench hardware, the printed circuit board in 3D

    Testbench hardware

    sporniket/kicad-conversions--thomson-mo5--i03-replacement

    Replaces the PROM that is used to convert pixel colors represented as a 4 bits value (pastel, red, green, blue) and a supplemental bit for blanking signal, into a RGB-222 value and a supplemental trigger signal for the…

    40 partsCC0-1.0
  • 2 layers49.5 × 72.4 mmSimple audio out, the printed circuit board in 3D

    Simple audio out

    sporniket/simple-audio-out

    A simple audio output for a 4 Ohm speaker, with volume setting

    14 partsCC0-1.0
  • 2 layers31.8 × 32.4 mmKicad conversions--thomson mo5--I03-replacement, the printed circuit board in 3D

    Kicad conversions--thomson mo5--I03-replacement

    sporniket/kicad-conversions--thomson-mo5--i03-replacement

    Replaces the PROM that is used to convert pixel colors represented as a 4 bits value (pastel, red, green, blue) and a supplemental bit for blanking signal, into a RGB-222 value and a supplemental trigger signal for the…

    4 partsCC0-1.0