Skip to the content
2 layers49.5 × 72.4 mmSimple audio out, the printed circuit board in 3D

A simple audio output for a 4 Ohm speaker, with volume setting

Size
49.5 × 72.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
6
Pads
20
Tracks, vias
18, 0
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
20 Jan 2024
Updated
4 Sep 2024

Overview

Simple audio out is an open-source printed circuit board by sporniket, from the sporniket/simple-audio-out repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 49.5 × 72.4 mm with 14 parts on 6 nets, routed with 18 tracks and 0 vias.

Its parts include 1 capacitor, 1 resistor, 1 transistor and 1 connector. It belongs with the audio and music boards of this library.

README

README.md

Simple Audio Out

[WARNING] Please read carefully this note before using this project. It contains important facts.

Content

  1. What is Simple Audio Out, and when to use it ?
  2. What should you know before using Simple Audio Out ?
  3. How to use Simple Audio Out ?
  4. Known issues
  5. Miscellanous

1. What is Simple Audio Out, and when to use it ?

Simple Audio Out is a simple audio output circuit for a 4 Ohm speaker, with volume setting

Licence

Simple Audio Out is published under the Creative Commons CC0 license. You can find a copy of the licence there : https://creativecommons.org/publicdomain/zero/1.0/legalcode

You can copy, modify, distribute and perform the work, even for commercial purposes, all without asking permission.

Simple Audio Out is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

Release notes

No releases yet

2. What should you know before using Simple Audio Out ?

Simple Audio Out is made using Kicad 7.

Do not use Simple Audio Out if this project is not suitable for your project.

3. How to use Simple Audio Out ?

From sources

To get the latest available work, one must clone the git repository, build and install the package.

text
git clone https://github.com/sporniket/simple-audio-out.git

Then, open the project with Kicad 7.

4. Known issues

See the project issues page.

5. Miscellanous

Report issues

Use the project issues page.

Parts

14
QtyValueFootprintReferences
23.5 mmMountingHole:MountingHole_3.5mmH2, H4
23.5 mmholes:MountingHole_3.5mm_room_1.5mmH1, H3
2LOGOcliparts:logo--cc--ccG***, G***
2LOGOcliparts:logo--cc--zeroG***, G***
12N3904Package_TO_SOT_THT:TO-92_Inline_WideQ1
1330commons-passives_THT:Passive_THT_resistor_W2.54mm_L10.16mmR1
14Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_HorizontalLS1
1470uFCapacitor_THT:CP_Radial_D10.0mm_P3.80mmC1
150KPotentiometer_THT:Potentiometer_Runtron_RM-065_VerticalRV1
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_HorizontalJ1

Similar boards

  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers62 × 24 mmMai button, the printed circuit board in 3D

    Mai button

    whowechina/mai_pico

    Pico controller for Maimai

    14 parts475

Questions

How big is the Simple audio out PCB?

It measures 49.5 × 72.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Simple audio out use?

14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Simple audio out KiCad files?

From the sporniket/simple-audio-out repository on GitHub, at the commit this page was made from: the board is simple-audio-out.kicad_pcb and its schematic simple-audio-out.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Simple audio out design in my own project?

Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).