2 layers
Insta360-joystick
jfwoods/insta360link-controller
A lightweight daemon, CLI tool, and (optional) firmware + hardware for controlling an Insta360 Link webcam without the first-party software.
58 parts9
2 layers58.8 × 59.6 mm
Kiku
SoanGlengan/kikumeshtastic
- Size
- 58.8 × 59.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 61
- Pads
- 195
- Tracks, vias
- 197, 10
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 27 May 2026
- Updated
- 15 Jul 2026
Overview
Kiku is an open-source printed circuit board by SoanGlengan, from the SoanGlengan/kiku repository on GitHub. It is a 2-layer board of 58.8 × 59.6 mm with 35 parts on 61 nets, routed with 197 tracks and 10 vias.
It is built around the ESP32-S3-WROOM-1-N8, TPS63001DRC and BQ25185DLHR. Its parts include 10 resistors, 5 capacitors, 4 ICs, 3 connectors and 3 switches. It belongs with the ESP32 boards of this library.
Main components
3
ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
TPS63001DRC
VSON-10-EP(3x3)-40℃~+85℃@(TA) 1 1.5MHz 1.8V~5.5V 3.3V 50uA Buck-Boost Buck-Boost Built-in Fixed Yes VSON-10-EP(3x3) DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
BQ25185DLHR
WSON-10-EP(2.2x2)-40℃~+125℃ 1 1A 2.2V 3V~18V 4.4V 4uA Charging IC Lithium Battery、LiFePO4 Battery Support WSON-10-EP(2.2x2) Battery Management ROHSTexas InstrumentsBattery Management
README
README.mdkiku
meshtastic device but open source
small meshtastic device that is using a esp32 and sx1262
The Bill of Materials [blocked]
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10 kΩ | Resistor_SMD:R_0402_1005Metric | R6, R7, R13, R14 |
| 4 | 3V3 | libraries:smalltestpoint | TP4, TP5, TP6, TP7 |
| 3 | 1 µF | Capacitor_SMD:C_0603_1608Metric | C5, C7, C8 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | PZS52C3V9M1Q | Diode_SMD:D_0402_1005Metric | D1, D2 |
| 1 | 1.5uH 70mOhm | Inductor_SMD:L_1008_2520Metric | L1 |
| 1 | 10 µF | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 100 kΩ | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 13 kΩ | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 300Ω | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 390 kΩ | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 47 µF | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | BM02B-SRSS-TB LFSN | libraries:CONN_BM02B-SRSS-TB_JST | J1 |
| 1 | BOOT | Button_Switch_SMD:SW_SPST_B3U-1100P | SW1 |
| 1 | BQ25185DLHR | libraries:WSON10_DLH_TEX | U6 |
| 1 | Conn_Coaxial | Connector_Coaxial:SMA_Molex_73251-1153_EdgeMount_Horizontal | J3 |
| 1 | EN | Button_Switch_SMD:SW_SPST_B3U-1100P | SW2 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | GND | libraries:smalltestpoint | TP2 |
| 1 | PWR | libraries:smalltestpoint | TP1 |
| 1 | RESET CHARGER | Button_Switch_SMD:SW_SPST_B3U-1100P | SW3 |
| 1 | TPS63001 | Package_SON:Texas_DRC0010J_ThermalVias | U3 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
| 1 | VSYS | libraries:smalltestpoint | TP3 |
| 1 | Wio-sx1262-n | libraries:Wio-SX1262 PCB Package | U2 |
Questions
How big is the Kiku PCB?
It measures 58.8 × 59.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Kiku use?
35 parts, built around the ESP32-S3-WROOM-1-N8, TPS63001DRC and BQ25185DLHR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Kiku KiCad files?
From the SoanGlengan/kiku repository on GitHub, at the commit this page was made from: the board is kiku.kicad_pcb and its schematic kiku.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Kiku design in my own project?
Its repository states no licence, so its author keeps all rights: ask SoanGlengan before reusing the design.
Similar boards
- 4 layers35 × 99.9 mm
Snips controller
thePunderWoman/SnipsControllers
The controllers built to work with Amidala
95 parts3GPL-2.0 - 2 layers80 × 40 mm
Cryptick token pcb
alphaseneca/cryptick-token-pcb
Hardware schematics, 2-layer PCB layout, and manufacturing files for Cryptick Token — the 100% open-source biometric hardware security key and cryptographic hardware enclave.
56 partsMIT - 4 layers67 × 42 mm
Sonar Controller
haydenmc/McAfee-Farm-Sonar-Controller
An ESP32 project that uses a sonar depth sensor to measure the water level of a cistern tank.
59 parts - 4 layers
- 2 layers150 × 101 mm
Smart scale
wngxp/smart-scale
Work-in-progress ESP32-S3 smart food scale with custom PCB, enclosure CAD, firmware, mobile app, and backend.
97 parts - 4 layers70 × 67 mm
Pairing voice pcb v11 70x67
windmoondreamer/pairing-voice-cube
아이가 목소리를 녹음하고, 부모가 버튼을 눌러 재생하는 장치의 회로기판 프로젝트. 80mm 큐브 케이스 · 최대 45초 녹음 · 내장 플래시 · 배터리 구동.
48 parts - 4 layers32 × 46 mm
Falcon core
PHS-SMCS/falcon-core
Lightest ESP32-based blimp controller with the works; 9-DoF, ToF altimetry, motor drivers, and Wi-Fi enabled camera streaming, all on a single 300mAh LiPo. >1hr of battery life.
94 partsAGPL-3.0